u-boot/arch/mips/dts/brcm,bcm6368.dtsi
Álvaro Fernández Rojas d9c1f0c23f bmips: bcm6368: add support for bcm6368-enet
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19 15:23:01 +01:00

228 lines
4.6 KiB
Text

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2017 Álvaro Fernández Rojas <noltari@gmail.com>
*/
#include <dt-bindings/clock/bcm6368-clock.h>
#include <dt-bindings/dma/bcm6368-dma.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/reset/bcm6368-reset.h>
#include "skeleton.dtsi"
/ {
compatible = "brcm,bcm6368";
aliases {
spi0 = &spi;
};
cpus {
reg = <0x10000000 0x4>;
#address-cells = <1>;
#size-cells = <0>;
u-boot,dm-pre-reloc;
cpu@0 {
compatible = "brcm,bcm6368-cpu", "mips,mips4Kc";
device_type = "cpu";
reg = <0>;
u-boot,dm-pre-reloc;
};
cpu@1 {
compatible = "brcm,bcm6368-cpu", "mips,mips4Kc";
device_type = "cpu";
reg = <1>;
u-boot,dm-pre-reloc;
};
};
clocks {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
u-boot,dm-pre-reloc;
periph_osc: periph-osc {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <50000000>;
u-boot,dm-pre-reloc;
};
periph_clk: periph-clk {
compatible = "brcm,bcm6345-clk";
reg = <0x10000004 0x4>;
#clock-cells = <1>;
};
};
pflash: nor@18000000 {
compatible = "cfi-flash";
reg = <0x18000000 0x2000000>;
bank-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
status = "disabled";
};
ubus {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
u-boot,dm-pre-reloc;
pll_cntl: syscon@10000008 {
compatible = "syscon";
reg = <0x10000008 0x4>;
};
syscon-reboot {
compatible = "syscon-reboot";
regmap = <&pll_cntl>;
offset = <0x0>;
mask = <0x1>;
};
periph_rst: reset-controller@10000010 {
compatible = "brcm,bcm6345-reset";
reg = <0x10000010 0x4>;
#reset-cells = <1>;
};
wdt: watchdog@1000005c {
compatible = "brcm,bcm6345-wdt";
reg = <0x1000005c 0xc>;
clocks = <&periph_osc>;
};
wdt-reboot {
compatible = "wdt-reboot";
wdt = <&wdt>;
};
gpio1: gpio-controller@10000080 {
compatible = "brcm,bcm6345-gpio";
reg = <0x10000080 0x4>, <0x10000088 0x4>;
gpio-controller;
#gpio-cells = <2>;
ngpios = <6>;
status = "disabled";
};
gpio0: gpio-controller@10000084 {
compatible = "brcm,bcm6345-gpio";
reg = <0x10000084 0x4>, <0x1000008c 0x4>;
gpio-controller;
#gpio-cells = <2>;
status = "disabled";
};
leds: led-controller@100000d0 {
compatible = "brcm,bcm6358-leds";
reg = <0x100000d0 0x8>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
uart0: serial@10000100 {
compatible = "brcm,bcm6345-uart";
reg = <0x10000100 0x18>;
clocks = <&periph_osc>;
status = "disabled";
};
uart1: serial@10000120 {
compatible = "brcm,bcm6345-uart";
reg = <0x10000120 0x18>;
clocks = <&periph_osc>;
status = "disabled";
};
spi: spi@10000800 {
compatible = "brcm,bcm6358-spi";
reg = <0x10000800 0x70c>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&periph_clk BCM6368_CLK_SPI>;
resets = <&periph_rst BCM6368_RST_SPI>;
spi-max-frequency = <20000000>;
num-cs = <6>;
status = "disabled";
};
memory-controller@10001200 {
compatible = "brcm,bcm6358-mc";
reg = <0x10001200 0x4c>;
u-boot,dm-pre-reloc;
};
ehci: usb-controller@10001500 {
compatible = "brcm,bcm6368-ehci", "generic-ehci";
reg = <0x10001500 0x100>;
phys = <&usbh>;
big-endian;
status = "disabled";
};
ohci: usb-controller@10001600 {
compatible = "brcm,bcm6368-ohci", "generic-ohci";
reg = <0x10001600 0x100>;
phys = <&usbh>;
big-endian;
status = "disabled";
};
usbh: usb-phy@10001700 {
compatible = "brcm,bcm6368-usbh";
reg = <0x10001700 0x38>;
#phy-cells = <0>;
clocks = <&periph_clk BCM6368_CLK_USBH>;
clock-names = "usbh";
resets = <&periph_rst BCM6368_RST_USBH>;
status = "disabled";
};
iudma: dma-controller@10006800 {
compatible = "brcm,bcm6368-iudma";
reg = <0x10006800 0x80>,
<0x10006a00 0x80>,
<0x10006c00 0x80>;
reg-names = "dma",
"dma-channels",
"dma-sram";
#dma-cells = <1>;
dma-channels = <8>;
};
enet: ethernet@10f00000 {
compatible = "brcm,bcm6368-enet";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x10f00000 0x10000>;
clocks = <&periph_clk BCM6368_CLK_SWPKT_USB>,
<&periph_clk BCM6368_CLK_SWPKT_SAR>,
<&periph_clk BCM6368_CLK_ROBOSW>;
resets = <&periph_rst BCM6368_RST_SWITCH>,
<&periph_rst BCM6368_RST_EPHY>;
dmas = <&iudma BCM6368_DMA_ENETSW_RX>,
<&iudma BCM6368_DMA_ENETSW_TX>;
dma-names = "rx",
"tx";
brcm,num-ports = <6>;
status = "disabled";
};
};
};