mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 08:57:58 +00:00
2b3b1c668b
Enable new PIO feature supported by Atmel SoC. Using CPU_HAS_PIO3 micro to enable PIO new feature. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
190 lines
7.2 KiB
C
190 lines
7.2 KiB
C
/*
|
|
* [origin: Linux kernel include/asm-arm/arch-at91/at91_pio.h]
|
|
*
|
|
* Copyright (C) 2005 Ivan Kokshaysky
|
|
* Copyright (C) SAN People
|
|
* Copyright (C) 2009 Jens Scharsig (js_at_ng@scharsoft.de)
|
|
*
|
|
* Parallel I/O Controller (PIO) - System peripherals registers.
|
|
* Based on AT91RM9200 datasheet revision E.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
|
|
#ifndef AT91_PIO_H
|
|
#define AT91_PIO_H
|
|
|
|
|
|
#define AT91_ASM_PIO_RANGE 0x200
|
|
#define AT91_ASM_PIOC_ASR \
|
|
(ATMEL_BASE_PIO + AT91_PIO_PORTC * AT91_ASM_PIO_RANGE + 0x70)
|
|
#define AT91_ASM_PIOC_BSR \
|
|
(ATMEL_BASE_PIO + AT91_PIO_PORTC * AT91_ASM_PIO_RANGE + 0x74)
|
|
#define AT91_ASM_PIOC_PDR \
|
|
(ATMEL_BASE_PIO + AT91_PIO_PORTC * AT91_ASM_PIO_RANGE + 0x04)
|
|
#define AT91_ASM_PIOC_PUDR \
|
|
(ATMEL_BASE_PIO + AT91_PIO_PORTC * AT91_ASM_PIO_RANGE + 0x60)
|
|
|
|
#define AT91_ASM_PIOD_PDR \
|
|
(ATMEL_BASE_PIO + AT91_PIO_PORTD * AT91_ASM_PIO_RANGE + 0x04)
|
|
#define AT91_ASM_PIOD_PUDR \
|
|
(ATMEL_BASE_PIO + AT91_PIO_PORTD * AT91_ASM_PIO_RANGE + 0x60)
|
|
#define AT91_ASM_PIOD_ASR \
|
|
(ATMEL_BASE_PIO + AT91_PIO_PORTD * AT91_ASM_PIO_RANGE + 0x70)
|
|
|
|
#ifndef __ASSEMBLY__
|
|
|
|
typedef struct at91_port {
|
|
u32 per; /* 0x00 PIO Enable Register */
|
|
u32 pdr; /* 0x04 PIO Disable Register */
|
|
u32 psr; /* 0x08 PIO Status Register */
|
|
u32 reserved0;
|
|
u32 oer; /* 0x10 Output Enable Register */
|
|
u32 odr; /* 0x14 Output Disable Registerr */
|
|
u32 osr; /* 0x18 Output Status Register */
|
|
u32 reserved1;
|
|
u32 ifer; /* 0x20 Input Filter Enable Register */
|
|
u32 ifdr; /* 0x24 Input Filter Disable Register */
|
|
u32 ifsr; /* 0x28 Input Filter Status Register */
|
|
u32 reserved2;
|
|
u32 sodr; /* 0x30 Set Output Data Register */
|
|
u32 codr; /* 0x34 Clear Output Data Register */
|
|
u32 odsr; /* 0x38 Output Data Status Register */
|
|
u32 pdsr; /* 0x3C Pin Data Status Register */
|
|
u32 ier; /* 0x40 Interrupt Enable Register */
|
|
u32 idr; /* 0x44 Interrupt Disable Register */
|
|
u32 imr; /* 0x48 Interrupt Mask Register */
|
|
u32 isr; /* 0x4C Interrupt Status Register */
|
|
u32 mder; /* 0x50 Multi-driver Enable Register */
|
|
u32 mddr; /* 0x54 Multi-driver Disable Register */
|
|
u32 mdsr; /* 0x58 Multi-driver Status Register */
|
|
u32 reserved3;
|
|
u32 pudr; /* 0x60 Pull-up Disable Register */
|
|
u32 puer; /* 0x64 Pull-up Enable Register */
|
|
u32 pusr; /* 0x68 Pad Pull-up Status Register */
|
|
u32 reserved4;
|
|
#if defined(CPU_HAS_PIO3)
|
|
u32 abcdsr1; /* 0x70 Peripheral ABCD Select Register 1 */
|
|
u32 abcdsr2; /* 0x74 Peripheral ABCD Select Register 2 */
|
|
u32 reserved5[2];
|
|
u32 ifscdr; /* 0x80 Input Filter SCLK Disable Register */
|
|
u32 ifscer; /* 0x84 Input Filter SCLK Enable Register */
|
|
u32 ifscsr; /* 0x88 Input Filter SCLK Status Register */
|
|
u32 scdr; /* 0x8C SCLK Divider Debouncing Register */
|
|
u32 ppddr; /* 0x90 Pad Pull-down Disable Register */
|
|
u32 ppder; /* 0x94 Pad Pull-down Enable Register */
|
|
u32 ppdsr; /* 0x98 Pad Pull-down Status Register */
|
|
u32 reserved6; /* */
|
|
#else
|
|
u32 asr; /* 0x70 Select A Register */
|
|
u32 bsr; /* 0x74 Select B Register */
|
|
u32 absr; /* 0x78 AB Select Status Register */
|
|
u32 reserved5[9]; /* */
|
|
#endif
|
|
u32 ower; /* 0xA0 Output Write Enable Register */
|
|
u32 owdr; /* 0xA4 Output Write Disable Register */
|
|
u32 owsr; /* OxA8 Output Write Status Register */
|
|
#if defined(CPU_HAS_PIO3)
|
|
u32 reserved7; /* */
|
|
u32 aimer; /* 0xB0 Additional INT Modes Enable Register */
|
|
u32 aimdr; /* 0xB4 Additional INT Modes Disable Register */
|
|
u32 aimmr; /* 0xB8 Additional INT Modes Mask Register */
|
|
u32 reserved8; /* */
|
|
u32 esr; /* 0xC0 Edge Select Register */
|
|
u32 lsr; /* 0xC4 Level Select Register */
|
|
u32 elsr; /* 0xC8 Edge/Level Status Register */
|
|
u32 reserved9; /* 0xCC */
|
|
u32 fellsr; /* 0xD0 Falling /Low Level Select Register */
|
|
u32 rehlsr; /* 0xD4 Rising /High Level Select Register */
|
|
u32 frlhsr; /* 0xD8 Fall/Rise - Low/High Status Register */
|
|
u32 reserved10; /* */
|
|
u32 locksr; /* 0xE0 Lock Status */
|
|
u32 wpmr; /* 0xE4 Write Protect Mode Register */
|
|
u32 wpsr; /* 0xE8 Write Protect Status Register */
|
|
u32 reserved11[5]; /* */
|
|
u32 schmitt; /* 0x100 Schmitt Trigger Register */
|
|
u32 reserved12[63];
|
|
#else
|
|
u32 reserved6[85];
|
|
#endif
|
|
} at91_port_t;
|
|
|
|
typedef union at91_pio {
|
|
struct {
|
|
at91_port_t pioa;
|
|
at91_port_t piob;
|
|
at91_port_t pioc;
|
|
#if (ATMEL_PIO_PORTS > 3)
|
|
at91_port_t piod;
|
|
#endif
|
|
#if (ATMEL_PIO_PORTS > 4)
|
|
at91_port_t pioe;
|
|
#endif
|
|
} ;
|
|
at91_port_t port[ATMEL_PIO_PORTS];
|
|
} at91_pio_t;
|
|
|
|
#ifdef CONFIG_AT91_GPIO
|
|
int at91_set_a_periph(unsigned port, unsigned pin, int use_pullup);
|
|
int at91_set_b_periph(unsigned port, unsigned pin, int use_pullup);
|
|
#if defined(CPU_HAS_PIO3)
|
|
int at91_set_c_periph(unsigned port, unsigned pin, int use_pullup);
|
|
int at91_set_d_periph(unsigned port, unsigned pin, int use_pullup);
|
|
int at91_set_pio_debounce(unsigned port, unsigned pin, int is_on, int div);
|
|
int at91_set_pio_pulldown(unsigned port, unsigned pin, int is_on);
|
|
int at91_set_pio_disable_schmitt_trig(unsigned port, unsigned pin);
|
|
#endif
|
|
int at91_set_pio_input(unsigned port, unsigned pin, int use_pullup);
|
|
int at91_set_pio_multi_drive(unsigned port, unsigned pin, int is_on);
|
|
int at91_set_pio_output(unsigned port, unsigned pin, int value);
|
|
int at91_set_pio_periph(unsigned port, unsigned pin, int use_pullup);
|
|
int at91_set_pio_pullup(unsigned port, unsigned pin, int use_pullup);
|
|
int at91_set_pio_deglitch(unsigned port, unsigned pin, int is_on);
|
|
int at91_set_pio_value(unsigned port, unsigned pin, int value);
|
|
int at91_get_pio_value(unsigned port, unsigned pin);
|
|
#endif
|
|
#endif
|
|
|
|
#define AT91_PIO_PORTA 0x0
|
|
#define AT91_PIO_PORTB 0x1
|
|
#define AT91_PIO_PORTC 0x2
|
|
#define AT91_PIO_PORTD 0x3
|
|
#define AT91_PIO_PORTE 0x4
|
|
|
|
#ifdef CONFIG_AT91_LEGACY
|
|
|
|
#define PIO_PER 0x00 /* Enable Register */
|
|
#define PIO_PDR 0x04 /* Disable Register */
|
|
#define PIO_PSR 0x08 /* Status Register */
|
|
#define PIO_OER 0x10 /* Output Enable Register */
|
|
#define PIO_ODR 0x14 /* Output Disable Register */
|
|
#define PIO_OSR 0x18 /* Output Status Register */
|
|
#define PIO_IFER 0x20 /* Glitch Input Filter Enable */
|
|
#define PIO_IFDR 0x24 /* Glitch Input Filter Disable */
|
|
#define PIO_IFSR 0x28 /* Glitch Input Filter Status */
|
|
#define PIO_SODR 0x30 /* Set Output Data Register */
|
|
#define PIO_CODR 0x34 /* Clear Output Data Register */
|
|
#define PIO_ODSR 0x38 /* Output Data Status Register */
|
|
#define PIO_PDSR 0x3c /* Pin Data Status Register */
|
|
#define PIO_IER 0x40 /* Interrupt Enable Register */
|
|
#define PIO_IDR 0x44 /* Interrupt Disable Register */
|
|
#define PIO_IMR 0x48 /* Interrupt Mask Register */
|
|
#define PIO_ISR 0x4c /* Interrupt Status Register */
|
|
#define PIO_MDER 0x50 /* Multi-driver Enable Register */
|
|
#define PIO_MDDR 0x54 /* Multi-driver Disable Register */
|
|
#define PIO_MDSR 0x58 /* Multi-driver Status Register */
|
|
#define PIO_PUDR 0x60 /* Pull-up Disable Register */
|
|
#define PIO_PUER 0x64 /* Pull-up Enable Register */
|
|
#define PIO_PUSR 0x68 /* Pull-up Status Register */
|
|
#define PIO_ASR 0x70 /* Peripheral A Select Register */
|
|
#define PIO_BSR 0x74 /* Peripheral B Select Register */
|
|
#define PIO_ABSR 0x78 /* AB Status Register */
|
|
#define PIO_OWER 0xa0 /* Output Write Enable Register */
|
|
#define PIO_OWDR 0xa4 /* Output Write Disable Register */
|
|
#define PIO_OWSR 0xa8 /* Output Write Status Register */
|
|
#endif
|
|
|
|
#endif
|