Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-05 20:54:31 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/include/configs/socfpga_vining_fpga.h
Tom Rini a09fea1d28 env: Finish migration of common ENV options 
- In ARMv8 NXP Layerscape platforms we also need to make use of
  CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
- On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
  to 0.
- Add Kconfig entry for ENV_ADDR.
- Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
- Add ENV_xxx_REDUND options that depend on their primary option and
  SYS_REDUNDAND_ENVIRONMENT
- On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
  for the pre-main-U-Boot environment location.
- On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
  rather it being non-zero, as it will now be zero by default.
- Rework the env_offset absolute in env/embedded.o to not use
  CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
  ENV_IS_IN_FLASH.
- Migrate all platforms.

Cc: Wolfgang Denk <wd@denx.de>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: uboot-stm32@st-md-mailman.stormreply.com
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-20 18:32:09 -05:00

204 lines
6.9 KiB
C
Raw Blame History

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2015-2019 Marek Vasut <marex@denx.de>
*/
#ifndef __CONFIG_SOFTING_VINING_FPGA_H__
#define __CONFIG_SOFTING_VINING_FPGA_H__
#include <asm/arch/base_addr_ac5.h>
/* Memory configurations */
#define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB on VINING_FPGA */
/* Booting Linux */
#define CONFIG_BOOTFILE "fitImage"
#define CONFIG_BOOTCOMMAND "run selboot"
#define CONFIG_SYS_BOOTM_LEN 0x2000000 /* 32 MiB */
#define CONFIG_LOADADDR 0x01000000
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
/* Ethernet on SoC (EMAC) */
#if defined(CONFIG_CMD_NET)
#define CONFIG_BOOTP_SEND_HOSTNAME
#endif
/* Extra Environment */
#define CONFIG_HOSTNAME "socfpga_vining_fpga"
/*
* Active LOW GPIO buttons:
* A: GPIO 77 ... the button between USB B and ethernet
* B: GPIO 78 ... the button between USB A ports
*
* The logic:
* if button B is pressed, boot recovery system after 10 seconds
* if force_boottype is set, boot system depending on the value in the
* $force_boottype variable after 1 second
* if button B is not pressed and force_boottype is not set, boot normal
* Linux system after 5 seconds
*/
#define CONFIG_EXTRA_ENV_SETTINGS \
"verify=n\0" \
"consdev=ttyS0\0" \
"baudrate=115200\0" \
"bootscript=boot.scr\0" \
"ubimtdnr=5\0" \
"ubimtd=rootfs\0" \
"ubipart=ubi0:vining-fpga-rootfs\0" \
"ubisfcs=1\0" /* Default is flash at CS#1 */ \
"netdev=eth0\0" \
"hostname=vining_fpga\0" \
"kernel_addr_r=0x10000000\0" \
"fdt_addr_r=0x20000000\0" \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
"dfu_alt_info=qspi0 sf 0:0;qspi1 sf 0:1\0" \
"mtdparts_0_16m=ff705000.spi.0:" /* 16MiB+128MiB SF config */ \
"1m(u-boot)," \
"64k(env1)," \
"64k(env2)," \
"256k(softing1)," \
"256k(softing2)," \
"-(rcvrfs)\0" /* Recovery */ \
"mtdparts_0_256m=ff705000.spi.0:" /* 256MiB(+256MiB) config */ \
"1m(u-boot)," \
"64k(env1)," \
"64k(env2)," \
"256k(softing1)," \
"256k(softing2)," \
"14720k(rcvrfs)," /* Recovery */ \
"64m(rootfs)," /* Root */ \
"-(userfs)\0" /* User */ \
"mtdparts_1_128m=ff705000.spi.1:" /* 16MiB+128MiB SF config */ \
"64m(rootfs)," \
"-(userfs)\0" \
"mtdparts_1_256m=ff705000.spi.1:" /* 256MiB+256MiB SF config */ \
"-(userfs2)\0" \
"update_filename=u-boot-with-spl-dtb.sfp\0" \
"update_qspi_offset=0x0\0" \
"update_qspi=" /* Update the QSPI firmware */ \
"if sf probe ; then " \
"if tftp ${update_filename} ; then " \
"sf update ${loadaddr} ${update_qspi_offset} ${filesize} ; " \
"fi ; " \
"fi\0" \
"sf_identify=" \
"setenv sf_size_0 ; setenv sf_size_1 ; " \
"sf probe 0:0 && setenv sf_size_0 ${sf_size} ; " \
"sf probe 0:1 && setenv sf_size_1 ${sf_size} ; " \
"if test -z \"${sf_size_1}\" ; then " \
/* 1x256MiB SF */ \
"setenv mtdparts_0 ${mtdparts_0_256m} ; " \
"setenv mtdparts_1 ; " \
"elif test \"${sf_size_0}\" = \"1000000\" ; then " \
/* 16MiB+128MiB SF */ \
"setenv mtdparts_0 ${mtdparts_0_16m} ; " \
"setenv mtdparts_1 ${mtdparts_1_128m} ; " \
"else " \
/* 256MiB+256MiB SF */ \
"setenv mtdparts_0 ${mtdparts_0_256m} ; " \
"setenv mtdparts_1 ${mtdparts_1_256m} ; " \
"fi\0" \
"fpga_filename=output_file.rbf\0" \
"load_fpga=" /* Load FPGA bitstream */ \
"if tftp ${fpga_filename} ; then " \
"fpga load 0 $loadaddr $filesize ; " \
"bridge enable ; " \
"fi\0" \
"addcons=" \
"setenv bootargs ${bootargs} " \
"console=${consdev},${baudrate}\0" \
"addip=" \
"setenv bootargs ${bootargs} " \
"ip=${ipaddr}:${serverip}:${gatewayip}:" \
"${netmask}:${hostname}:${netdev}:off\0" \
"addmisc=" \
"setenv bootargs ${bootargs} ${miscargs}\0" \
"addmtd=" \
"if test -z \"${sf_size_1}\" ; then " \
"setenv mtdparts \"${mtdparts_0}\" ; " \
"else " \
"setenv mtdparts \"${mtdparts_0};${mtdparts_1}\" ; " \
"fi ; " \
"setenv bootargs ${bootargs} mtdparts=${mtdparts}\0" \
"addargs=run addcons addmtd addmisc\0" \
"ubiload=" \
"ubi part ${ubimtd} ; ubifsmount ${ubipart} ; " \
"ubifsload ${kernel_addr_r} /boot/${bootfile}\0" \
"netload=" \
"tftp ${kernel_addr_r} ${hostname}/${bootfile}\0" \
"miscargs=nohlt panic=1\0" \
"ubiargs=" \
"setenv bootargs ubi.mtd=${ubimtdnr} " \
"root=${ubipart} rootfstype=ubifs\0" \
"nfsargs=" \
"setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath},v3,tcp\0" \
"ubi_sfsel=" \
"if test \"${boottype}\" = \"rcvr\" ; then " \
"setenv ubisfcs 0 ; " \
"setenv ubimtd rcvrfs ; " \
"setenv ubimtdnr 5 ; " \
"setenv mtdparts mtdparts=${mtdparts_0} ; " \
"setenv mtdids nor0=ff705000.spi.0 ; " \
"setenv ubipart ubi0:vining-fpga-rootfs ; " \
"else " \
"if test \"${sf_size_0}\" = \"1000000\" ; then "\
/* 16MiB+128MiB SF */ \
"setenv ubisfcs 1 ; " \
"setenv ubimtd rootfs ; " \
"setenv ubimtdnr 6 ; " \
"setenv mtdparts mtdparts=${mtdparts_1} ; " \
"setenv mtdids nor0=ff705000.spi.1 ; " \
"setenv ubipart ubi0:vining-fpga-rootfs ; " \
"else " \
/* 256MiB(+256MiB) SF */ \
"setenv ubisfcs 0 ; " \
"setenv ubimtd rootfs ; " \
"setenv ubimtdnr 6 ; " \
"setenv mtdparts mtdparts=${mtdparts_0} ; " \
"setenv mtdids nor0=ff705000.spi.0 ; " \
"setenv ubipart ubi0:vining-fpga-rootfs ; " \
"fi ; " \
"fi ; " \
"sf probe 0:${ubisfcs}\0" \
"boot_kernel=" \
"if test -z \"${sf_size_1}\" ; then " /* 1x256MiB SF */ \
"imxtract ${kernel_addr_r} fdt@1 ${fdt_addr_r} && " \
"fdt addr ${fdt_addr_r} && " \
"fdt resize && " \
"fdt set /soc/spi@ff705000/n25q00@1 status disabled && " \
"bootm ${kernel_addr_r}:kernel@1 - ${fdt_addr_r} ; " \
"else " \
"bootm ${kernel_addr_r} ; " \
"fi\0" \
"ubi_ubi=" \
"run ubi_sfsel ubiload ubiargs addargs boot_kernel\0" \
"ubi_nfs=" \
"run ubiload nfsargs addip addargs boot_kernel\0" \
"net_ubi=" \
"run netload ubiargs addargs boot_kernel\0" \
"net_nfs=" \
"run netload nfsargs addip addargs boot_kernel\0" \
"selboot=" /* Select from where to boot. */ \
"run sf_identify ; " \
"if test \"${bootmode}\" = \"qspi\" ; then " \
"led all off ; " \
"if test \"${boottype}\" = \"rcvr\" ; then " \
"echo \"Booting recovery system\" ; " \
"led 3 on ; " /* Bottom RED */ \
"fi ; " \
"led 1 on ; " /* Top RED */ \
"run ubi_ubi ; " \
"else echo \"Unsupported boot mode: \"${bootmode} ; " \
"fi\0" \
"socfpga_legacy_reset_compat=1\0"
/* Support changing the prompt string */
#define CONFIG_CMDLINE_PS_SUPPORT
/* The rest of the configuration is shared */
#include <configs/socfpga_common.h>
#endif /* __CONFIG_SOFTING_VINING_FPGA_H__ */
Reference in a new issue View git blame Copy permalink