mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-05 20:54:31 +00:00
e6676a34c4
This converts the following to Kconfig: CONFIG_MXC_UART Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Peng Fan <peng.fan@nxp.com>
314 lines
8.6 KiB
C
314 lines
8.6 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright (C) 2013 Gateworks Corporation
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/* SPL */
|
|
/* Location in NAND to read U-Boot from */
|
|
#define CONFIG_SYS_NAND_U_BOOT_OFFS (14 * SZ_1M)
|
|
|
|
/* Falcon Mode */
|
|
#define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000
|
|
|
|
/* Falcon Mode - NAND support: args@17MB kernel@18MB */
|
|
#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS (18 * SZ_1M)
|
|
|
|
/* Falcon Mode - MMC support: args@1MB kernel@2MB */
|
|
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x800 /* 1MB */
|
|
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512)
|
|
#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000 /* 2MB */
|
|
|
|
#include "imx6_spl.h" /* common IMX6 SPL configuration */
|
|
#include "mx6_common.h"
|
|
|
|
#define CONFIG_MACH_TYPE 4520 /* Gateworks Ventana Platform */
|
|
|
|
/* Serial ATAG */
|
|
#define CONFIG_SERIAL_TAG
|
|
|
|
/* Size of malloc() pool */
|
|
#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
|
|
|
|
/* Init Functions */
|
|
|
|
/* Driver Model */
|
|
#ifndef CONFIG_SPL_BUILD
|
|
#define CONFIG_DM_THERMAL
|
|
#endif
|
|
|
|
/* Thermal */
|
|
#define CONFIG_IMX_THERMAL
|
|
|
|
/* Serial */
|
|
#define CONFIG_MXC_UART_BASE UART2_BASE
|
|
|
|
#if !defined(CONFIG_SPI_FLASH) && defined(CONFIG_SPL_NAND_SUPPORT)
|
|
/* Enable NAND support */
|
|
#ifdef CONFIG_CMD_NAND
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
#define CONFIG_SYS_NAND_BASE 0x40000000
|
|
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
|
|
#define CONFIG_SYS_NAND_ONFI_DETECTION
|
|
|
|
/* DMA stuff, needed for GPMI/MXS NAND support */
|
|
#endif
|
|
|
|
#endif /* CONFIG_SPI_FLASH */
|
|
|
|
/* I2C Configs */
|
|
#define CONFIG_SYS_I2C
|
|
#define CONFIG_SYS_I2C_MXC
|
|
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
|
|
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
|
|
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
|
|
#define CONFIG_SYS_I2C_SPEED 100000
|
|
#define CONFIG_I2C_GSC 0
|
|
#define CONFIG_I2C_EDID
|
|
|
|
/* MMC Configs */
|
|
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
|
|
|
|
/*
|
|
* SATA Configs
|
|
*/
|
|
#ifdef CONFIG_CMD_SATA
|
|
#define CONFIG_SYS_SATA_MAX_DEVICE 1
|
|
#define CONFIG_DWC_AHSATA_PORT_ID 0
|
|
#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
|
|
#define CONFIG_LBA48
|
|
#endif
|
|
|
|
/*
|
|
* PCI express
|
|
*/
|
|
#ifdef CONFIG_CMD_PCI
|
|
#define CONFIG_PCI_SCAN_SHOW
|
|
#define CONFIG_PCI_FIXUP_DEV
|
|
#define CONFIG_PCIE_IMX
|
|
#endif
|
|
|
|
/*
|
|
* PMIC
|
|
*/
|
|
#define CONFIG_POWER
|
|
#define CONFIG_POWER_I2C
|
|
#define CONFIG_POWER_PFUZE100
|
|
#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
|
|
#define CONFIG_POWER_LTC3676
|
|
#define CONFIG_POWER_LTC3676_I2C_ADDR 0x3c
|
|
|
|
/* Various command support */
|
|
|
|
/* Ethernet support */
|
|
#define CONFIG_FEC_MXC
|
|
#define IMX_FEC_BASE ENET_BASE_ADDR
|
|
#define CONFIG_FEC_XCV_TYPE RGMII
|
|
#define CONFIG_FEC_MXC_PHYADDR 0
|
|
#define CONFIG_ARP_TIMEOUT 200UL
|
|
|
|
/* USB Configs */
|
|
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
|
|
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
|
|
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
|
|
#define CONFIG_MXC_USB_FLAGS 0
|
|
#define CONFIG_USBD_HS
|
|
#define CONFIG_NETCONSOLE
|
|
|
|
/* Framebuffer and LCD */
|
|
#define CONFIG_VIDEO_LOGO
|
|
#define CONFIG_IMX_HDMI
|
|
#define CONFIG_IMX_VIDEO_SKIP
|
|
#define CONFIG_VIDEO_BMP_LOGO
|
|
#define CONFIG_SPLASH_SCREEN_ALIGN
|
|
#define CONFIG_HIDE_LOGO_VERSION /* Custom config to hide U-boot version */
|
|
|
|
/* Miscellaneous configurable options */
|
|
#define CONFIG_HWCONFIG
|
|
|
|
/* Memory configuration */
|
|
|
|
/* Physical Memory Map */
|
|
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
|
|
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
|
|
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
|
|
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
|
|
|
|
#define CONFIG_SYS_INIT_SP_OFFSET \
|
|
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_ADDR \
|
|
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
|
|
|
|
/*
|
|
* MTD Command for mtdparts
|
|
*/
|
|
|
|
/* Persistent Environment Config */
|
|
#if defined(CONFIG_ENV_IS_IN_MMC)
|
|
#define CONFIG_SYS_MMC_ENV_DEV 0
|
|
#define CONFIG_SYS_MMC_ENV_PART 1
|
|
#endif
|
|
|
|
/* Environment */
|
|
#define CONFIG_IPADDR 192.168.1.1
|
|
#define CONFIG_SERVERIP 192.168.1.146
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
|
|
"pcidisable=1\0" \
|
|
"splashpos=m,m\0" \
|
|
"usb_pgood_delay=2000\0" \
|
|
"console=ttymxc1\0" \
|
|
"bootdevs=usb mmc sata flash\0" \
|
|
"hwconfig=_UNKNOWN_\0" \
|
|
"video=\0" \
|
|
\
|
|
"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
|
|
"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
|
|
"disk=0\0" \
|
|
"part=1\0" \
|
|
\
|
|
"fdt_high=0xffffffff\0" \
|
|
"fdt_addr=0x18000000\0" \
|
|
"initrd_high=0xffffffff\0" \
|
|
"fixfdt=" \
|
|
"fdt addr ${fdt_addr}\0" \
|
|
"bootdir=boot\0" \
|
|
"loadfdt=" \
|
|
"if ${fsload} ${fdt_addr} ${bootdir}/${fdt_file}; then " \
|
|
"echo Loaded DTB from ${bootdir}/${fdt_file}; " \
|
|
"run fixfdt; " \
|
|
"elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file1}; then " \
|
|
"echo Loaded DTB from ${bootdir}/${fdt_file1}; " \
|
|
"run fixfdt; " \
|
|
"elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file2}; then " \
|
|
"echo Loaded DTB from ${bootdir}/${fdt_file2}; " \
|
|
"run fixfdt; " \
|
|
"fi\0" \
|
|
\
|
|
"fs=ext4\0" \
|
|
"script=6x_bootscript-ventana\0" \
|
|
"loadscript=" \
|
|
"if ${fsload} ${loadaddr} ${bootdir}/${script}; then " \
|
|
"source ${loadaddr}; " \
|
|
"fi\0" \
|
|
\
|
|
"uimage=uImage\0" \
|
|
"mmc_root=mmcblk0p1\0" \
|
|
"mmc_boot=" \
|
|
"setenv fsload \"${fs}load mmc ${disk}:${part}\"; " \
|
|
"mmc dev ${disk} && mmc rescan && " \
|
|
"setenv dtype mmc; run loadscript; " \
|
|
"if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
|
|
"setenv bootargs console=${console},${baudrate} " \
|
|
"root=/dev/${mmc_root} rootfstype=${fs} " \
|
|
"rootwait rw ${video} ${extra}; " \
|
|
"if run loadfdt; then " \
|
|
"bootm ${loadaddr} - ${fdt_addr}; " \
|
|
"else " \
|
|
"bootm; " \
|
|
"fi; " \
|
|
"fi\0" \
|
|
\
|
|
"sata_boot=" \
|
|
"setenv fsload \"${fs}load sata ${disk}:${part}\"; " \
|
|
"sata init && " \
|
|
"setenv dtype sata; run loadscript; " \
|
|
"if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
|
|
"setenv bootargs console=${console},${baudrate} " \
|
|
"root=/dev/sda1 rootfstype=${fs} " \
|
|
"rootwait rw ${video} ${extra}; " \
|
|
"if run loadfdt; then " \
|
|
"bootm ${loadaddr} - ${fdt_addr}; " \
|
|
"else " \
|
|
"bootm; " \
|
|
"fi; " \
|
|
"fi\0" \
|
|
"usb_boot=" \
|
|
"setenv fsload \"${fs}load usb ${disk}:${part}\"; " \
|
|
"usb start && usb dev ${disk} && " \
|
|
"setenv dtype usb; run loadscript; " \
|
|
"if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
|
|
"setenv bootargs console=${console},${baudrate} " \
|
|
"root=/dev/sda1 rootfstype=${fs} " \
|
|
"rootwait rw ${video} ${extra}; " \
|
|
"if run loadfdt; then " \
|
|
"bootm ${loadaddr} - ${fdt_addr}; " \
|
|
"else " \
|
|
"bootm; " \
|
|
"fi; " \
|
|
"fi\0"
|
|
|
|
#ifdef CONFIG_SPI_FLASH
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
CONFIG_EXTRA_ENV_SETTINGS_COMMON \
|
|
"image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
|
|
"image_uboot=ventana/u-boot_spi.imx\0" \
|
|
\
|
|
"spi_koffset=0x90000\0" \
|
|
"spi_klen=0x200000\0" \
|
|
\
|
|
"spi_updateuboot=echo Updating uboot from " \
|
|
"${serverip}:${image_uboot}...; " \
|
|
"tftpboot ${loadaddr} ${image_uboot} && " \
|
|
"sf probe && sf erase 0 80000 && " \
|
|
"sf write ${loadaddr} 400 ${filesize}\0" \
|
|
"spi_update=echo Updating OS from ${serverip}:${image_os} " \
|
|
"to ${spi_koffset} ...; " \
|
|
"tftp ${loadaddr} ${image_os} && " \
|
|
"sf probe && " \
|
|
"sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \
|
|
\
|
|
"flash_boot=" \
|
|
"if sf probe && " \
|
|
"sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \
|
|
"setenv bootargs console=${console},${baudrate} " \
|
|
"root=/dev/mtdblock3 " \
|
|
"rootfstype=squashfs,jffs2 " \
|
|
"${video} ${extra}; " \
|
|
"bootm; " \
|
|
"fi\0"
|
|
#else
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
CONFIG_EXTRA_ENV_SETTINGS_COMMON \
|
|
\
|
|
"image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
|
|
"nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
|
|
"tftp ${loadaddr} ${image_rootfs} && " \
|
|
"nand erase.part rootfs && " \
|
|
"nand write ${loadaddr} rootfs ${filesize}\0" \
|
|
\
|
|
"flash_boot=" \
|
|
"setenv fsload 'ubifsload'; " \
|
|
"ubi part rootfs; " \
|
|
"if ubi check boot; then " \
|
|
"ubifsmount ubi0:boot; " \
|
|
"setenv root ubi0:rootfs ubi.mtd=2 " \
|
|
"rootfstype=squashfs,ubifs; " \
|
|
"setenv bootdir; " \
|
|
"elif ubi check rootfs; then " \
|
|
"ubifsmount ubi0:rootfs; " \
|
|
"setenv root ubi0:rootfs ubi.mtd=2 " \
|
|
"rootfstype=ubifs; " \
|
|
"fi; " \
|
|
"setenv dtype nand; run loadscript; " \
|
|
"if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
|
|
"setenv bootargs console=${console},${baudrate} " \
|
|
"root=${root} ${video} ${extra}; " \
|
|
"if run loadfdt; then " \
|
|
"ubifsumount; " \
|
|
"bootm ${loadaddr} - ${fdt_addr}; " \
|
|
"else " \
|
|
"ubifsumount; bootm; " \
|
|
"fi; " \
|
|
"fi\0"
|
|
#endif
|
|
|
|
#define CONFIG_BOOTCOMMAND \
|
|
"for btype in ${bootdevs}; do " \
|
|
"echo; echo Attempting ${btype} boot...; " \
|
|
"if run ${btype}_boot; then; fi; " \
|
|
"done"
|
|
|
|
#endif /* __CONFIG_H */
|