mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-11 15:37:23 +00:00
08b3f7599f
To recognize DIMMs with ECC capability by testing ECC bit only. Not to be confused by Address Parity bit. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
98 lines
2.8 KiB
C
98 lines
2.8 KiB
C
/*
|
|
* Copyright 2008 Freescale Semiconductor, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* Version 2 as published by the Free Software Foundation.
|
|
*/
|
|
|
|
#ifndef DDR2_DIMM_PARAMS_H
|
|
#define DDR2_DIMM_PARAMS_H
|
|
|
|
#define EDC_DATA_PARITY 1
|
|
#define EDC_ECC 2
|
|
#define EDC_AC_PARITY 4
|
|
|
|
/* Parameters for a DDR2 dimm computed from the SPD */
|
|
typedef struct dimm_params_s {
|
|
|
|
/* DIMM organization parameters */
|
|
char mpart[19]; /* guaranteed null terminated */
|
|
|
|
unsigned int n_ranks;
|
|
unsigned long long rank_density;
|
|
unsigned long long capacity;
|
|
unsigned int data_width;
|
|
unsigned int primary_sdram_width;
|
|
unsigned int ec_sdram_width;
|
|
unsigned int registered_dimm;
|
|
|
|
/* SDRAM device parameters */
|
|
unsigned int n_row_addr;
|
|
unsigned int n_col_addr;
|
|
unsigned int edc_config; /* 0 = none, 1 = parity, 2 = ECC */
|
|
unsigned int n_banks_per_sdram_device;
|
|
unsigned int burst_lengths_bitmask; /* BL=4 bit 2, BL=8 = bit 3 */
|
|
unsigned int row_density;
|
|
|
|
/* used in computing base address of DIMMs */
|
|
unsigned long long base_address;
|
|
/* mirrored DIMMs */
|
|
unsigned int mirrored_dimm; /* only for ddr3 */
|
|
|
|
/* DIMM timing parameters */
|
|
|
|
unsigned int mtb_ps; /* medium timebase ps, only for ddr3 */
|
|
unsigned int tAA_ps; /* minimum CAS latency time, only for ddr3 */
|
|
unsigned int tFAW_ps; /* four active window delay, only for ddr3 */
|
|
|
|
/*
|
|
* SDRAM clock periods
|
|
* The range for these are 1000-10000 so a short should be sufficient
|
|
*/
|
|
unsigned int tCKmin_X_ps;
|
|
unsigned int tCKmin_X_minus_1_ps;
|
|
unsigned int tCKmin_X_minus_2_ps;
|
|
unsigned int tCKmax_ps;
|
|
|
|
/* SPD-defined CAS latencies */
|
|
unsigned int caslat_X;
|
|
unsigned int caslat_X_minus_1;
|
|
unsigned int caslat_X_minus_2;
|
|
|
|
unsigned int caslat_lowest_derated; /* Derated CAS latency */
|
|
|
|
/* basic timing parameters */
|
|
unsigned int tRCD_ps;
|
|
unsigned int tRP_ps;
|
|
unsigned int tRAS_ps;
|
|
|
|
unsigned int tWR_ps; /* maximum = 63750 ps */
|
|
unsigned int tWTR_ps; /* maximum = 63750 ps */
|
|
unsigned int tRFC_ps; /* max = 255 ns + 256 ns + .75 ns
|
|
= 511750 ps */
|
|
|
|
unsigned int tRRD_ps; /* maximum = 63750 ps */
|
|
unsigned int tRC_ps; /* maximum = 254 ns + .75 ns = 254750 ps */
|
|
|
|
unsigned int refresh_rate_ps;
|
|
|
|
/* DDR3 doesn't need these as below */
|
|
unsigned int tIS_ps; /* byte 32, spd->ca_setup */
|
|
unsigned int tIH_ps; /* byte 33, spd->ca_hold */
|
|
unsigned int tDS_ps; /* byte 34, spd->data_setup */
|
|
unsigned int tDH_ps; /* byte 35, spd->data_hold */
|
|
unsigned int tRTP_ps; /* byte 38, spd->trtp */
|
|
unsigned int tDQSQ_max_ps; /* byte 44, spd->tdqsq */
|
|
unsigned int tQHS_ps; /* byte 45, spd->tqhs */
|
|
|
|
/* DDR3 RDIMM */
|
|
unsigned char rcw[16]; /* Register Control Word 0-15 */
|
|
} dimm_params_t;
|
|
|
|
extern unsigned int ddr_compute_dimm_parameters(
|
|
const generic_spd_eeprom_t *spd,
|
|
dimm_params_t *pdimm,
|
|
unsigned int dimm_number);
|
|
|
|
#endif
|