mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 13:56:30 +00:00
60929b0506
Enable DM USB, DM PHY and USB gadget support in imx8mm-mx8menlo SPL to let the board continue SDP loading of second stage after the first stage was loaded by BootROM SDP implementation. It is not possible to jump back into BootROM v1 and let the BootROM implementation continue the SDP loading, all this has to be performed by the U-Boot CI HDRC controller driver and SDP protocol implementation, both of which fit into the SPL just barely. With this patch, it is possible to start both U-Boot SPL and U-Boot using e.g. uuu on this board as follows: $ uuu -brun spl flash.bin Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com>
146 lines
3.8 KiB
Text
146 lines
3.8 KiB
Text
CONFIG_ARM=y
|
|
CONFIG_ARCH_IMX8M=y
|
|
CONFIG_SYS_TEXT_BASE=0x40200000
|
|
CONFIG_SYS_MALLOC_LEN=0x2000000
|
|
CONFIG_SPL_GPIO=y
|
|
CONFIG_SPL_LIBCOMMON_SUPPORT=y
|
|
CONFIG_SPL_LIBGENERIC_SUPPORT=y
|
|
CONFIG_ENV_SIZE=0x2000
|
|
CONFIG_ENV_OFFSET=0xFFFFDE00
|
|
CONFIG_DM_GPIO=y
|
|
CONFIG_DEFAULT_DEVICE_TREE="imx8mm-mx8menlo"
|
|
CONFIG_SPL_TEXT_BASE=0x7E1000
|
|
CONFIG_TARGET_IMX8MM_MX8MENLO=y
|
|
CONFIG_SYS_PROMPT="Verdin iMX8MM # "
|
|
CONFIG_SPL_MMC=y
|
|
CONFIG_SPL_SERIAL=y
|
|
CONFIG_SPL_DRIVERS_MISC=y
|
|
CONFIG_BOOTCOUNT_BOOTLIMIT=3
|
|
CONFIG_SYS_BOOTCOUNT_ADDR=0x30370090
|
|
CONFIG_SPL=y
|
|
CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
|
|
CONFIG_ENV_OFFSET_REDUND=0xFFFFDE00
|
|
CONFIG_SYS_LOAD_ADDR=0x40480000
|
|
CONFIG_SYS_MEMTEST_START=0x40000000
|
|
CONFIG_SYS_MEMTEST_END=0x80000000
|
|
CONFIG_DISTRO_DEFAULTS=y
|
|
CONFIG_FIT=y
|
|
CONFIG_FIT_EXTERNAL_OFFSET=0x3000
|
|
CONFIG_SPL_LOAD_FIT=y
|
|
# CONFIG_USE_SPL_FIT_GENERATOR is not set
|
|
CONFIG_OF_SYSTEM_SETUP=y
|
|
CONFIG_BOOTCOMMAND="mmc partconf 0 distro_bootpart && load ${devtype} ${devnum}:${distro_bootpart} ${loadaddr} boot/fitImage && source ${loadaddr}:bootscr-boot.cmd ; reset"
|
|
CONFIG_DEFAULT_FDT_FILE="imx8mm-mx8menlo.dtb"
|
|
CONFIG_LOG=y
|
|
# CONFIG_DISPLAY_BOARDINFO is not set
|
|
CONFIG_DISPLAY_BOARDINFO_LATE=y
|
|
CONFIG_ARCH_MISC_INIT=y
|
|
CONFIG_BOARD_LATE_INIT=y
|
|
CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
|
|
CONFIG_SPL_BSS_START_ADDR=0x910000
|
|
CONFIG_SPL_BSS_MAX_SIZE=0x2000
|
|
CONFIG_SPL_BOARD_INIT=y
|
|
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
|
|
CONFIG_SPL_STACK=0x920000
|
|
CONFIG_SYS_SPL_MALLOC=y
|
|
CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
|
|
CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000
|
|
CONFIG_SYS_SPL_MALLOC_SIZE=0x80000
|
|
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
|
|
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
|
|
CONFIG_SPL_I2C=y
|
|
CONFIG_SPL_POWER=y
|
|
CONFIG_SPL_USB_HOST=y
|
|
CONFIG_SPL_USB_GADGET=y
|
|
CONFIG_SPL_USB_SDP_SUPPORT=y
|
|
CONFIG_SPL_WATCHDOG=y
|
|
CONFIG_SYS_MAXARGS=64
|
|
CONFIG_SYS_CBSIZE=2048
|
|
CONFIG_SYS_PBSIZE=2081
|
|
# CONFIG_BOOTM_NETBSD is not set
|
|
CONFIG_CMD_ASKENV=y
|
|
# CONFIG_CMD_EXPORTENV is not set
|
|
# CONFIG_CMD_CRC32 is not set
|
|
CONFIG_CMD_MEMTEST=y
|
|
CONFIG_CMD_CLK=y
|
|
CONFIG_CMD_FUSE=y
|
|
CONFIG_CMD_GPIO=y
|
|
CONFIG_CMD_I2C=y
|
|
CONFIG_CMD_MMC=y
|
|
CONFIG_CMD_USB=y
|
|
CONFIG_CMD_USB_SDP=y
|
|
CONFIG_CMD_USB_MASS_STORAGE=y
|
|
CONFIG_CMD_BOOTCOUNT=y
|
|
CONFIG_CMD_CACHE=y
|
|
CONFIG_CMD_UUID=y
|
|
CONFIG_CMD_REGULATOR=y
|
|
CONFIG_CMD_BTRFS=y
|
|
CONFIG_CMD_EXT4_WRITE=y
|
|
# CONFIG_ISO_PARTITION is not set
|
|
# CONFIG_EFI_PARTITION is not set
|
|
CONFIG_OF_CONTROL=y
|
|
CONFIG_SPL_OF_CONTROL=y
|
|
CONFIG_ENV_OVERWRITE=y
|
|
CONFIG_ENV_IS_IN_MMC=y
|
|
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
|
|
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
|
CONFIG_SYS_MMC_ENV_PART=1
|
|
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
|
|
CONFIG_USE_ETHPRIME=y
|
|
CONFIG_ETHPRIME="FEC"
|
|
CONFIG_VERSION_VARIABLE=y
|
|
CONFIG_IP_DEFRAG=y
|
|
CONFIG_TFTP_BLOCKSIZE=4096
|
|
CONFIG_SPL_DM=y
|
|
CONFIG_BOOTCOUNT_LIMIT=y
|
|
CONFIG_SYS_BOOTCOUNT_MAGIC=0xB0C40000
|
|
CONFIG_SPL_CLK_COMPOSITE_CCF=y
|
|
CONFIG_CLK_COMPOSITE_CCF=y
|
|
CONFIG_SPL_CLK_IMX8MM=y
|
|
CONFIG_CLK_IMX8MM=y
|
|
CONFIG_GPIO_HOG=y
|
|
CONFIG_MXC_GPIO=y
|
|
CONFIG_DM_I2C=y
|
|
CONFIG_MISC=y
|
|
CONFIG_I2C_EEPROM=y
|
|
CONFIG_SUPPORT_EMMC_BOOT=y
|
|
CONFIG_FSL_USDHC=y
|
|
CONFIG_PHYLIB=y
|
|
CONFIG_PHY_ADDR_ENABLE=y
|
|
CONFIG_PHY_MICREL=y
|
|
CONFIG_PHY_MICREL_KSZ90X1=y
|
|
CONFIG_FEC_MXC=y
|
|
CONFIG_MII=y
|
|
CONFIG_SPL_PHY=y
|
|
CONFIG_SPL_NOP_PHY=y
|
|
CONFIG_PINCTRL=y
|
|
CONFIG_SPL_PINCTRL=y
|
|
CONFIG_PINCTRL_IMX8M=y
|
|
CONFIG_POWER_DOMAIN=y
|
|
CONFIG_IMX8M_POWER_DOMAIN=y
|
|
CONFIG_DM_PMIC=y
|
|
CONFIG_SPL_DM_PMIC_PCA9450=y
|
|
CONFIG_DM_PMIC_PFUZE100=y
|
|
CONFIG_DM_REGULATOR=y
|
|
CONFIG_DM_REGULATOR_FIXED=y
|
|
CONFIG_DM_REGULATOR_GPIO=y
|
|
CONFIG_DM_SERIAL=y
|
|
CONFIG_MXC_UART=y
|
|
CONFIG_SYSRESET=y
|
|
CONFIG_SPL_SYSRESET=y
|
|
CONFIG_SYSRESET_PSCI=y
|
|
CONFIG_SYSRESET_WATCHDOG=y
|
|
CONFIG_DM_THERMAL=y
|
|
CONFIG_USB=y
|
|
CONFIG_USB_EHCI_HCD=y
|
|
CONFIG_MXC_USB_OTG_HACTIVE=y
|
|
# CONFIG_USB_STORAGE is not set
|
|
CONFIG_USB_GADGET=y
|
|
CONFIG_USB_GADGET_MANUFACTURER="Menlo"
|
|
CONFIG_USB_GADGET_VENDOR_NUM=0x0525
|
|
CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
|
|
CONFIG_CI_UDC=y
|
|
CONFIG_SDP_LOADADDR=0x40400000
|
|
CONFIG_USB_GADGET_DOWNLOAD=y
|
|
CONFIG_IMX_WATCHDOG=y
|
|
CONFIG_OF_LIBFDT_OVERLAY=y
|