u-boot/arch/x86/dts/dfi-bt700.dtsi
Bin Meng 770ee01742 x86: ich6_gpio: Add use-lvl-write-cache for I/O access mode
Add a device-tree property use-lvl-write-cache that will cause
writes to lvl to be cached instead of read from lvl before each
write. This is required on some platforms that have the register
implemented as dual read/write (such as Baytrail).

Prior to this fix the blue USB port on the Minnowboard Max was
unusable since USB_HOST_EN0 was set high then immediately set
low when USB_HOST_EN1 was written.

This also resolves the 'gpio clear | set' command warning like:
  "Warning: value of pin is still 0"

Signed-off-by: George McCollister <george.mccollister@gmail.com>
<rebased on latest origin/master, fixed all baytrail boards>
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-17 17:13:06 +08:00

314 lines
7.1 KiB
Text

/*
* Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
* Copyright (C) 2016 Stefan Roese <sr@denx.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <dt-bindings/gpio/x86-gpio.h>
#include <dt-bindings/interrupt-router/intel-irq.h>
#include "skeleton.dtsi"
#include "rtc.dtsi"
#include "tsc_timer.dtsi"
/ {
config {
silent_console = <0>;
};
pch_pinctrl {
compatible = "intel,x86-pinctrl";
reg = <0 0>;
/* Add UART1 PAD configuration (SIO HS-UART) */
uart1_txd@0 {
pad-offset = <0x10>;
mode-func = <1>;
};
uart1_rxd@0 {
pad-offset = <0x20>;
mode-func = <1>;
};
/*
* As of today, the latest version FSP (gold4) for BayTrail
* misses the PAD configuration of the SD controller's Card
* Detect signal. The default PAD value for the CD pin sets
* the pin to work in GPIO mode, which causes card detect
* status cannot be reflected by the Present State register
* in the SD controller (bit 16 & bit 18 are always zero).
*
* Configure this pin to function 1 (SD controller).
*/
sdmmc3_cd@0 {
pad-offset = <0x3a0>;
mode-func = <1>;
};
};
chosen {
stdout-path = "/serial";
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "intel,baytrail-cpu";
reg = <0>;
intel,apic-id = <0>;
};
cpu@1 {
device_type = "cpu";
compatible = "intel,baytrail-cpu";
reg = <1>;
intel,apic-id = <2>;
};
cpu@2 {
device_type = "cpu";
compatible = "intel,baytrail-cpu";
reg = <2>;
intel,apic-id = <4>;
};
cpu@3 {
device_type = "cpu";
compatible = "intel,baytrail-cpu";
reg = <3>;
intel,apic-id = <6>;
};
};
pci {
compatible = "intel,pci-baytrail", "pci-x86";
#address-cells = <3>;
#size-cells = <2>;
u-boot,dm-pre-reloc;
ranges = <0x02000000 0x0 0x80000000 0x80000000 0 0x40000000
0x42000000 0x0 0xc0000000 0xc0000000 0 0x20000000
0x01000000 0x0 0x2000 0x2000 0 0xe000>;
pciuart0: uart@1e,3 {
compatible = "pci8086,0f0a.00",
"pci8086,0f0a",
"pciclass,070002",
"pciclass,0700",
"ns16550";
u-boot,dm-pre-reloc;
reg = <0x0200f310 0x0 0x0 0x0 0x0>;
reg-shift = <2>;
clock-frequency = <58982400>;
current-speed = <115200>;
};
pch@1f,0 {
reg = <0x0000f800 0 0 0 0>;
compatible = "pci8086,0f1c", "intel,pch9";
#address-cells = <1>;
#size-cells = <1>;
irq-router {
compatible = "intel,irq-router";
intel,pirq-config = "ibase";
intel,ibase-offset = <0x50>;
intel,actl-addr = <0>;
intel,pirq-link = <8 8>;
intel,pirq-mask = <0xdee0>;
intel,pirq-routing = <
/* BayTrail PCI devices */
PCI_BDF(0, 2, 0) INTA PIRQA
PCI_BDF(0, 3, 0) INTA PIRQA
PCI_BDF(0, 16, 0) INTA PIRQA
PCI_BDF(0, 17, 0) INTA PIRQA
PCI_BDF(0, 18, 0) INTA PIRQA
PCI_BDF(0, 19, 0) INTA PIRQA
PCI_BDF(0, 20, 0) INTA PIRQA
PCI_BDF(0, 21, 0) INTA PIRQA
PCI_BDF(0, 22, 0) INTA PIRQA
PCI_BDF(0, 23, 0) INTA PIRQA
PCI_BDF(0, 24, 0) INTA PIRQA
PCI_BDF(0, 24, 1) INTC PIRQC
PCI_BDF(0, 24, 2) INTD PIRQD
PCI_BDF(0, 24, 3) INTB PIRQB
PCI_BDF(0, 24, 4) INTA PIRQA
PCI_BDF(0, 24, 5) INTC PIRQC
PCI_BDF(0, 24, 6) INTD PIRQD
PCI_BDF(0, 24, 7) INTB PIRQB
PCI_BDF(0, 26, 0) INTA PIRQA
PCI_BDF(0, 27, 0) INTA PIRQA
PCI_BDF(0, 28, 0) INTA PIRQA
PCI_BDF(0, 28, 1) INTB PIRQB
PCI_BDF(0, 28, 2) INTC PIRQC
PCI_BDF(0, 28, 3) INTD PIRQD
PCI_BDF(0, 29, 0) INTA PIRQA
PCI_BDF(0, 30, 0) INTA PIRQA
PCI_BDF(0, 30, 1) INTD PIRQD
PCI_BDF(0, 30, 2) INTB PIRQB
PCI_BDF(0, 30, 3) INTC PIRQC
PCI_BDF(0, 30, 4) INTD PIRQD
PCI_BDF(0, 30, 5) INTB PIRQB
PCI_BDF(0, 31, 3) INTB PIRQB
/*
* PCIe root ports downstream
* interrupts
*/
PCI_BDF(1, 0, 0) INTA PIRQA
PCI_BDF(1, 0, 0) INTB PIRQB
PCI_BDF(1, 0, 0) INTC PIRQC
PCI_BDF(1, 0, 0) INTD PIRQD
PCI_BDF(2, 0, 0) INTA PIRQB
PCI_BDF(2, 0, 0) INTB PIRQC
PCI_BDF(2, 0, 0) INTC PIRQD
PCI_BDF(2, 0, 0) INTD PIRQA
PCI_BDF(3, 0, 0) INTA PIRQC
PCI_BDF(3, 0, 0) INTB PIRQD
PCI_BDF(3, 0, 0) INTC PIRQA
PCI_BDF(3, 0, 0) INTD PIRQB
PCI_BDF(4, 0, 0) INTA PIRQD
PCI_BDF(4, 0, 0) INTB PIRQA
PCI_BDF(4, 0, 0) INTC PIRQB
PCI_BDF(4, 0, 0) INTD PIRQC
>;
};
spi: spi {
#address-cells = <1>;
#size-cells = <0>;
compatible = "intel,ich9-spi";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0>;
compatible = "stmicro,n25q064a",
"spi-flash";
memory-map = <0xff800000 0x00800000>;
rw-mrc-cache {
label = "rw-mrc-cache";
reg = <0x006f0000 0x00010000>;
};
};
};
gpioa {
compatible = "intel,ich6-gpio";
u-boot,dm-pre-reloc;
reg = <0 0x20>;
bank-name = "A";
use-lvl-write-cache;
};
gpiob {
compatible = "intel,ich6-gpio";
u-boot,dm-pre-reloc;
reg = <0x20 0x20>;
bank-name = "B";
use-lvl-write-cache;
};
gpioc {
compatible = "intel,ich6-gpio";
u-boot,dm-pre-reloc;
reg = <0x40 0x20>;
bank-name = "C";
use-lvl-write-cache;
};
gpiod {
compatible = "intel,ich6-gpio";
u-boot,dm-pre-reloc;
reg = <0x60 0x20>;
bank-name = "D";
use-lvl-write-cache;
};
gpioe {
compatible = "intel,ich6-gpio";
u-boot,dm-pre-reloc;
reg = <0x80 0x20>;
bank-name = "E";
use-lvl-write-cache;
};
gpiof {
compatible = "intel,ich6-gpio";
u-boot,dm-pre-reloc;
reg = <0xA0 0x20>;
bank-name = "F";
use-lvl-write-cache;
};
};
};
fsp {
compatible = "intel,baytrail-fsp";
fsp,mrc-init-tseg-size = <0>;
fsp,mrc-init-mmio-size = <0x800>;
fsp,mrc-init-spd-addr1 = <0xa0>;
fsp,mrc-init-spd-addr2 = <0xa2>;
fsp,emmc-boot-mode = <1>;
fsp,enable-sdio;
fsp,enable-sdcard;
fsp,enable-hsuart0;
fsp,enable-hsuart1;
fsp,enable-spi;
fsp,enable-sata;
fsp,sata-mode = <1>;
fsp,enable-lpe;
fsp,lpss-sio-enable-pci-mode;
fsp,enable-dma0;
fsp,enable-dma1;
fsp,enable-i2c0;
fsp,enable-i2c1;
fsp,enable-i2c2;
fsp,enable-i2c3;
fsp,enable-i2c4;
fsp,enable-i2c5;
fsp,enable-i2c6;
fsp,enable-pwm0;
fsp,enable-pwm1;
fsp,igd-dvmt50-pre-alloc = <2>;
fsp,aperture-size = <2>;
fsp,gtt-size = <2>;
fsp,scc-enable-pci-mode;
fsp,os-selection = <4>;
fsp,emmc45-ddr50-enabled;
fsp,emmc45-retune-timer-value = <8>;
fsp,enable-igd;
fsp,enable-memory-down;
fsp,memory-down-params {
compatible = "intel,baytrail-fsp-mdp";
fsp,dram-speed = <2>; /* 2=1333MHz */
fsp,dram-type = <1>; /* 1=DDR3L */
fsp,dimm-0-enable;
fsp,dimm-width = <1>; /* 1=x16, 2=x32 */
fsp,dimm-density = <3>; /* 3=8Gbit */
fsp,dimm-bus-width = <3>; /* 3=64bits */
fsp,dimm-sides = <0>; /* 0=1 ranks -> 0x2b */
/* These following values might need a re-visit */
fsp,dimm-tcl = <8>;
fsp,dimm-trpt-rcd = <8>;
fsp,dimm-twr = <8>;
fsp,dimm-twtr = <4>;
fsp,dimm-trrd = <6>;
fsp,dimm-trtp = <4>;
fsp,dimm-tfaw = <22>;
};
};
microcode {
update@0 {
#include "microcode/m0130673325.dtsi"
};
update@1 {
#include "microcode/m0130679907.dtsi"
};
};
};