u-boot/board/muas3001/muas3001.c
Marcel Ziswiler 3ca55bce9c mpc8260: remove Ethernet node fixup to use generic FDT code.
Remove Ethernet node fixup from mgcoge and muas3001 boards and modify its
configs for the common mpc8260 code to use generic Ethernet fixup.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@noser.com>
Tested-by: Heiko Schocher <hs@denx.de>
2009-09-15 23:01:15 +02:00

367 lines
16 KiB
C

/*
* (C) Copyright 2008
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <mpc8260.h>
#include <ioports.h>
#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
#include <libfdt.h>
#endif
/*
* I/O Port configuration table
*
* if conf is 1, then that port pin will be configured at boot time
* according to the five values podr/pdir/ppar/psor/pdat for that entry
*/
const iop_conf_t iop_conf_tab[4][32] = {
/* Port A */
{ /* conf ppar psor pdir podr pdat */
/* PA31 */ { 0, 0, 0, 0, 0, 0 }, /* PA31 */
/* PA30 */ { 0, 0, 0, 0, 0, 0 }, /* PA30 */
/* PA29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC1 TXER */
/* PA28 */ { 1, 1, 1, 1, 0, 0 }, /* FCC1 TXEN */
/* PA27 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 RXDV */
/* PA26 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 RXER */
/* PA25 */ { 1, 0, 0, 1, 0, 0 }, /* ETH_PWRDWN */
/* PA24 */ { 1, 0, 0, 1, 0, 1 }, /* ETH_RESET */
/* PA23 */ { 0, 0, 0, 0, 0, 0 }, /* PA23 */
/* PA22 */ { 0, 0, 0, 0, 0, 0 }, /* PA22 */
/* PA21 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 TXD3 */
/* PA20 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 TXD2 */
/* PA19 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 TXD1 */
/* PA18 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 TXD0 */
/* PA17 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXD0 */
/* PA16 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXD1 */
/* PA15 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXD2 */
/* PA14 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXD3 */
/* PA13 */ { 0, 0, 0, 0, 0, 0 }, /* PA13 */
/* PA12 */ { 1, 0, 0, 1, 0, 0 }, /* ETH_SLEEP */
/* PA11 */ { 0, 0, 0, 0, 0, 0 }, /* PA11 */
/* PA10 */ { 1, 0, 0, 1, 0, 0 }, /* MDIO */
/* PA9 */ { 1, 0, 0, 1, 0, 0 }, /* MDC */
/* PA8 */ { 1, 1, 0, 0, 0, 0 }, /* SMC2 RxD */
/* PA7 */ { 0, 0, 0, 0, 0, 0 }, /* PA7 */
/* PA6 */ { 0, 0, 0, 0, 0, 0 }, /* PA6 */
/* PA5 */ { 0, 0, 0, 0, 0, 0 }, /* PA5 */
/* PA4 */ { 0, 0, 0, 0, 0, 0 }, /* PA4 */
/* PA3 */ { 0, 0, 0, 0, 0, 0 }, /* PA3 */
/* PA2 */ { 0, 0, 0, 0, 0, 0 }, /* PA2 */
/* PA1 */ { 0, 0, 0, 0, 0, 0 }, /* PA1 */
/* PA0 */ { 0, 0, 0, 0, 0, 0 } /* PA0 */
},
/* Port B */
{ /* conf ppar psor pdir podr pdat */
/* PB31 */ { 0, 0, 0, 0, 0, 0 }, /* PB31 */
/* PB30 */ { 0, 0, 0, 0, 0, 0 }, /* PB30 */
/* PB29 */ { 0, 0, 0, 0, 0, 0 }, /* PB29 */
/* PB28 */ { 1, 1, 1, 1, 0, 0 }, /* SCC1 TxD */
/* PB27 */ { 0, 0, 0, 0, 0, 0 }, /* PB27 */
/* PB26 */ { 0, 0, 0, 0, 0, 0 }, /* PB26 */
/* PB25 */ { 0, 0, 0, 0, 0, 0 }, /* PB25 */
/* PB24 */ { 0, 0, 0, 0, 0, 0 }, /* PB24 */
/* PB23 */ { 0, 0, 0, 0, 0, 0 }, /* PB23 */
/* PB22 */ { 0, 0, 0, 0, 0, 0 }, /* PB22 */
/* PB21 */ { 0, 0, 0, 0, 0, 0 }, /* PB21 */
/* PB20 */ { 0, 0, 0, 0, 0, 0 }, /* PB20 */
/* PB19 */ { 0, 0, 0, 0, 0, 0 }, /* PB19 */
/* PB18 */ { 0, 0, 0, 0, 0, 0 }, /* PB18 */
/* PB17 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
/* PB16 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
/* PB15 */ { 1, 1, 0, 0, 0, 0 }, /* SCC2 RxD */
/* PB14 */ { 1, 1, 0, 0, 0, 0 }, /* SCC3 RxD */
/* PB13 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
/* PB12 */ { 1, 1, 1, 1, 0, 0 }, /* SCC2 TxD */
/* PB11 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
/* PB10 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
/* PB9 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
/* PB8 */ { 1, 1, 1, 1, 0, 0 }, /* SCC3 TxD */
/* PB7 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
/* PB6 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
/* PB5 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
/* PB4 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
/* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
/* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
/* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
/* PB0 */ { 0, 0, 0, 0, 0, 0 } /* non-existent */
},
/* Port C */
{ /* conf ppar psor pdir podr pdat */
/* PC31 */ { 0, 0, 0, 0, 0, 0 }, /* PC31 */
/* PC30 */ { 1, 1, 1, 1, 0, 0 }, /* Timer1 OUT */
/* PC29 */ { 0, 0, 0, 0, 0, 0 }, /* PC29 */
/* PC28 */ { 0, 0, 0, 0, 0, 0 }, /* PC28 */
/* PC27 */ { 0, 0, 0, 0, 0, 0 }, /* PC27 */
/* PC26 */ { 0, 0, 0, 0, 0, 0 }, /* PC26 */
/* PC25 */ { 0, 0, 0, 0, 0, 0 }, /* PC25 */
/* PC24 */ { 0, 0, 0, 0, 0, 0 }, /* PC24 */
/* PC23 */ { 0, 0, 0, 0, 0, 0 }, /* PC23 */
/* PC22 */ { 0, 0, 0, 0, 0, 0 }, /* PC22 */
/* PC21 */ { 1, 1, 0, 0, 0, 0 }, /* FCC RxCLK 11 */
/* PC20 */ { 1, 1, 0, 0, 0, 0 }, /* FCC TxCLK 12 */
/* PC19 */ { 0, 0, 0, 0, 0, 0 }, /* PC19 */
/* PC18 */ { 0, 0, 0, 0, 0, 0 }, /* PC18 */
/* PC17 */ { 0, 0, 0, 0, 0, 0 }, /* PC17 */
/* PC16 */ { 0, 0, 0, 0, 0, 0 }, /* PC16 */
/* PC15 */ { 1, 1, 0, 1, 0, 0 }, /* SMC2 TxD */
/* PC14 */ { 0, 0, 0, 0, 0, 0 }, /* PC14 */
/* PC13 */ { 0, 0, 0, 0, 0, 0 }, /* PC13 */
/* PC12 */ { 1, 0, 0, 1, 0, 0 }, /* TX OUTPUT SLEW1 */
/* PC11 */ { 1, 0, 0, 1, 0, 0 }, /* TX OUTPUT SLEW0 */
/* PC10 */ { 0, 0, 0, 0, 0, 0 }, /* PC10 */
/* PC9 */ { 1, 0, 0, 1, 0, 1 }, /* SPA_TX_EN */
/* PC8 */ { 0, 0, 0, 0, 0, 0 }, /* PC8 */
/* PC7 */ { 0, 0, 0, 0, 0, 0 }, /* PC7 */
/* PC6 */ { 0, 0, 0, 0, 0, 0 }, /* PC6 */
/* PC5 */ { 0, 0, 0, 0, 0, 0 }, /* PC5 */
/* PC4 */ { 0, 0, 0, 0, 0, 0 }, /* PC4 */
/* PC3 */ { 0, 0, 0, 0, 0, 0 }, /* PC3 */
/* PC2 */ { 0, 0, 0, 0, 0, 0 }, /* PC2 */
/* PC1 */ { 0, 0, 0, 0, 0, 0 }, /* PC1 */
/* PC0 */ { 0, 0, 0, 0, 0, 0 }, /* PC0 */
},
/* Port D */
{ /* conf ppar psor pdir podr pdat */
/* PD31 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 RxD */
/* PD30 */ { 0, 0, 0, 0, 0, 0 }, /* PD30 */
/* PD29 */ { 0, 0, 0, 0, 0, 0 }, /* PD29 */
/* PD28 */ { 0, 0, 0, 0, 0, 0 }, /* PD28 */
/* PD27 */ { 0, 0, 0, 0, 0, 0 }, /* PD27 */
/* PD26 */ { 0, 0, 0, 0, 0, 0 }, /* PD26 */
/* PD25 */ { 0, 0, 0, 0, 0, 0 }, /* PD25 */
/* PD24 */ { 0, 0, 0, 0, 0, 0 }, /* PD24 */
/* PD23 */ { 0, 0, 0, 0, 0, 0 }, /* PD23 */
/* PD22 */ { 1, 1, 0, 0, 0, 0 }, /* SCC4: RXD */
/* PD21 */ { 1, 1, 0, 1, 0, 0 }, /* SCC4: TXD */
/* PD20 */ { 0, 0, 0, 0, 0, 0 }, /* PD18 */
/* PD19 */ { 0, 0, 0, 0, 0, 0 }, /* PD19 */
/* PD18 */ { 0, 0, 0, 0, 0, 0 }, /* PD18 */
/* PD17 */ { 0, 0, 0, 0, 0, 0 }, /* PD17 */
/* PD16 */ { 0, 0, 0, 0, 0, 0 }, /* PD16 */
#if defined(CONFIG_HARD_I2C)
/* PD15 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SDA */
/* PD14 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SCL */
#else
/* PD15 */ { 1, 0, 0, 0, 1, 1 }, /* PD15 */
/* PD14 */ { 1, 0, 0, 1, 1, 1 }, /* PD14 */
#endif
/* PD13 */ { 0, 0, 0, 0, 0, 0 }, /* PD13 */
/* PD12 */ { 0, 0, 0, 0, 0, 0 }, /* PD12 */
/* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* PD11 */
/* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* PD10 */
/* PD9 */ { 1, 1, 0, 1, 0, 0 }, /* SMC1 TxD */
/* PD8 */ { 1, 1, 0, 0, 0, 0 }, /* SMC1 RxD */
/* PD7 */ { 0, 0, 0, 0, 0, 0 }, /* PD7 */
/* PD6 */ { 0, 0, 0, 0, 0, 0 }, /* PD6 */
/* PD5 */ { 0, 0, 0, 0, 0, 0 }, /* PD5 */
/* PD4 */ { 0, 0, 0, 0, 0, 0 }, /* PD4 */
/* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
/* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
/* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
/* PD0 */ { 0, 0, 0, 0, 0, 0 } /* non-existent */
}
};
/* Try SDRAM initialization with P/LSDMR=sdmr and ORx=orx
*
* This routine performs standard 8260 initialization sequence
* and calculates the available memory size. It may be called
* several times to try different SDRAM configurations on both
* 60x and local buses.
*/
static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
ulong orx, volatile uchar * base)
{
volatile uchar c = 0xff;
volatile uint *sdmr_ptr;
volatile uint *orx_ptr;
ulong maxsize, size;
int i;
/* We must be able to test a location outsize the maximum legal size
* to find out THAT we are outside; but this address still has to be
* mapped by the controller. That means, that the initial mapping has
* to be (at least) twice as large as the maximum expected size.
*/
maxsize = (1 + (~orx | 0x7fff))/* / 2*/;
sdmr_ptr = &memctl->memc_psdmr;
orx_ptr = &memctl->memc_or1;
*orx_ptr = orx;
/*
* Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35):
*
* "At system reset, initialization software must set up the
* programmable parameters in the memory controller banks registers
* (ORx, BRx, P/LSDMR). After all memory parameters are configured,
* system software should execute the following initialization sequence
* for each SDRAM device.
*
* 1. Issue a PRECHARGE-ALL-BANKS command
* 2. Issue eight CBR REFRESH commands
* 3. Issue a MODE-SET command to initialize the mode register
*
* The initial commands are executed by setting P/LSDMR[OP] and
* accessing the SDRAM with a single-byte transaction."
*
* The appropriate BRx/ORx registers have already been set when we
* get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
*/
*sdmr_ptr = sdmr | PSDMR_OP_PREA;
*base = c;
*sdmr_ptr = sdmr | PSDMR_OP_CBRR;
for (i = 0; i < 8; i++)
*base = c;
*sdmr_ptr = sdmr | PSDMR_OP_MRW;
*(base + CONFIG_SYS_MRS_OFFS) = c; /* setting MR on address lines */
*sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN;
*base = c;
size = get_ram_size ((long *)base, maxsize);
*orx_ptr = orx | ~(size - 1);
return (size);
}
phys_size_t initdram (int board_type)
{
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8260_t *memctl = &immap->im_memctl;
long psize;
#ifndef CONFIG_SYS_RAMBOOT
long sizelittle, sizebig;
#endif
memctl->memc_psrt = CONFIG_SYS_PSRT;
memctl->memc_mptpr = CONFIG_SYS_MPTPR;
#ifndef CONFIG_SYS_RAMBOOT
/* 60x SDRAM setup:
*/
sizelittle = try_init (memctl, CONFIG_SYS_PSDMR_LITTLE, CONFIG_SYS_OR1_LITTLE,
(uchar *) CONFIG_SYS_SDRAM_BASE);
sizebig = try_init (memctl, CONFIG_SYS_PSDMR_BIG, CONFIG_SYS_OR1_BIG,
(uchar *) CONFIG_SYS_SDRAM_BASE);
if (sizelittle < sizebig) {
psize = sizebig;
} else {
psize = try_init (memctl, CONFIG_SYS_PSDMR_LITTLE, CONFIG_SYS_OR1_LITTLE,
(uchar *) CONFIG_SYS_SDRAM_BASE);
}
#endif /* CONFIG_SYS_RAMBOOT */
icache_enable ();
return (psize);
}
int checkboard (void)
{
puts ("Board: MUAS3001\n");
return 0;
}
/*
* Early board initalization.
*/
int board_early_init_r (void)
{
return 0;
}
#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
/*
* update "memory" property in the blob
*/
void ft_blob_update (void *blob, bd_t *bd)
{
int ret, nodeoffset = 0;
ulong memory_data[2] = {0};
ulong flash_data[4] = {0};
ulong speed = 0;
memory_data[0] = cpu_to_be32 (bd->bi_memstart);
memory_data[1] = cpu_to_be32 (bd->bi_memsize);
nodeoffset = fdt_path_offset (blob, "/memory");
if (nodeoffset >= 0) {
ret = fdt_setprop (blob, nodeoffset, "reg", memory_data,
sizeof(memory_data));
if (ret < 0)
printf ("ft_blob_update): cannot set /memory/reg "
"property err:%s\n", fdt_strerror (ret));
} else {
/* memory node is required in dts */
printf ("ft_blob_update(): cannot find /memory node "
"err:%s\n", fdt_strerror(nodeoffset));
}
/* update Flash addr, size */
flash_data[2] = cpu_to_be32 (CONFIG_SYS_FLASH_BASE);
flash_data[3] = cpu_to_be32 (CONFIG_SYS_FLASH_SIZE);
nodeoffset = fdt_path_offset (blob, "/localbus");
if (nodeoffset >= 0) {
ret = fdt_setprop (blob, nodeoffset, "ranges", flash_data,
sizeof (flash_data));
if (ret < 0)
printf ("ft_blob_update): cannot set /localbus/ranges "
"property err:%s\n", fdt_strerror(ret));
} else {
/* memory node is required in dts */
printf ("ft_blob_update(): cannot find /localbus node "
"err:%s\n", fdt_strerror (nodeoffset));
}
/* baudrate */
nodeoffset = fdt_path_offset (blob, "/soc/cpm/serial");
if (nodeoffset >= 0) {
speed = cpu_to_be32 (bd->bi_baudrate);
ret = fdt_setprop (blob, nodeoffset, "current-speed", &speed,
sizeof (unsigned long));
if (ret < 0)
printf ("ft_blob_update): cannot set /soc/cpm/serial/current-speed "
"property err:%s\n", fdt_strerror (ret));
} else {
/* baudrate is required in dts */
printf ("ft_blob_update(): cannot find /soc/cpm/smc2/current-speed node "
"err:%s\n", fdt_strerror (nodeoffset));
}
}
void ft_board_setup (void *blob, bd_t *bd)
{
ft_cpu_setup (blob, bd);
ft_blob_update (blob, bd);
}
#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */