Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-11 15:37:23 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/drivers/usb/musb-new/pic32.c
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style 
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

287 lines
7.9 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* Microchip PIC32 MUSB "glue layer"
*
* Copyright (C) 2015, Microchip Technology Inc.
* Cristian Birsan <cristian.birsan@microchip.com>
* Purna Chandra Mandal <purna.mandal@microchip.com>
*
* Based on the dsps "glue layer" code.
*/
#include <common.h>
#include <linux/usb/musb.h>
#include "linux-compat.h"
#include "musb_core.h"
#include "musb_uboot.h"
DECLARE_GLOBAL_DATA_PTR;
#define PIC32_TX_EP_MASK 0x0f /* EP0 + 7 Tx EPs */
#define PIC32_RX_EP_MASK 0x0e /* 7 Rx EPs */
#define MUSB_SOFTRST 0x7f
#define MUSB_SOFTRST_NRST BIT(0)
#define MUSB_SOFTRST_NRSTX BIT(1)
#define USBCRCON 0
#define USBCRCON_USBWKUPEN BIT(0) /* Enable Wakeup Interrupt */
#define USBCRCON_USBRIE BIT(1) /* Enable Remote resume Interrupt */
#define USBCRCON_USBIE BIT(2) /* Enable USB General interrupt */
#define USBCRCON_SENDMONEN BIT(3) /* Enable Session End VBUS monitoring */
#define USBCRCON_BSVALMONEN BIT(4) /* Enable B-Device VBUS monitoring */
#define USBCRCON_ASVALMONEN BIT(5) /* Enable A-Device VBUS monitoring */
#define USBCRCON_VBUSMONEN BIT(6) /* Enable VBUS monitoring */
#define USBCRCON_PHYIDEN BIT(7) /* PHY ID monitoring enable */
#define USBCRCON_USBIDVAL BIT(8) /* USB ID value */
#define USBCRCON_USBIDOVEN BIT(9) /* USB ID override enable */
#define USBCRCON_USBWK BIT(24) /* USB Wakeup Status */
#define USBCRCON_USBRF BIT(25) /* USB Resume Status */
#define USBCRCON_USBIF BIT(26) /* USB General Interrupt Status */
/* PIC32 controller data */
struct pic32_musb_data {
struct musb_host_data mdata;
struct device dev;
void __iomem *musb_glue;
};
#define to_pic32_musb_data(d) \
container_of(d, struct pic32_musb_data, dev)
static void pic32_musb_disable(struct musb *musb)
{
/* no way to shut the controller */
}
static int pic32_musb_enable(struct musb *musb)
{
/* soft reset by NRSTx */
musb_writeb(musb->mregs, MUSB_SOFTRST, MUSB_SOFTRST_NRSTX);
/* set mode */
musb_platform_set_mode(musb, musb->board_mode);
return 0;
}
static irqreturn_t pic32_interrupt(int irq, void *hci)
{
struct musb *musb = hci;
irqreturn_t ret = IRQ_NONE;
u32 epintr, usbintr;
/* ack usb core interrupts */
musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
if (musb->int_usb)
musb_writeb(musb->mregs, MUSB_INTRUSB, musb->int_usb);
/* ack endpoint interrupts */
musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX) & PIC32_RX_EP_MASK;
if (musb->int_rx)
musb_writew(musb->mregs, MUSB_INTRRX, musb->int_rx);
musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX) & PIC32_TX_EP_MASK;
if (musb->int_tx)
musb_writew(musb->mregs, MUSB_INTRTX, musb->int_tx);
/* drop spurious RX and TX if device is disconnected */
if (musb->int_usb & MUSB_INTR_DISCONNECT) {
musb->int_tx = 0;
musb->int_rx = 0;
}
if (musb->int_tx || musb->int_rx || musb->int_usb)
ret = musb_interrupt(musb);
return ret;
}
static int pic32_musb_set_mode(struct musb *musb, u8 mode)
{
struct device *dev = musb->controller;
struct pic32_musb_data *pdata = to_pic32_musb_data(dev);
switch (mode) {
case MUSB_HOST:
clrsetbits_le32(pdata->musb_glue + USBCRCON,
USBCRCON_USBIDVAL, USBCRCON_USBIDOVEN);
break;
case MUSB_PERIPHERAL:
setbits_le32(pdata->musb_glue + USBCRCON,
USBCRCON_USBIDVAL | USBCRCON_USBIDOVEN);
break;
case MUSB_OTG:
dev_err(dev, "support for OTG is unimplemented\n");
break;
default:
dev_err(dev, "unsupported mode %d\n", mode);
return -EINVAL;
}
return 0;
}
static int pic32_musb_init(struct musb *musb)
{
struct pic32_musb_data *pdata = to_pic32_musb_data(musb->controller);
u32 ctrl, hwvers;
u8 power;
/* Returns zero if not clocked */
hwvers = musb_read_hwvers(musb->mregs);
if (!hwvers)
return -ENODEV;
/* Reset the musb */
power = musb_readb(musb->mregs, MUSB_POWER);
power = power | MUSB_POWER_RESET;
musb_writeb(musb->mregs, MUSB_POWER, power);
mdelay(100);
/* Start the on-chip PHY and its PLL. */
power = power & ~MUSB_POWER_RESET;
musb_writeb(musb->mregs, MUSB_POWER, power);
musb->isr = pic32_interrupt;
ctrl = USBCRCON_USBIF | USBCRCON_USBRF |
USBCRCON_USBWK | USBCRCON_USBIDOVEN |
USBCRCON_PHYIDEN | USBCRCON_USBIE |
USBCRCON_USBRIE | USBCRCON_USBWKUPEN |
USBCRCON_VBUSMONEN;
writel(ctrl, pdata->musb_glue + USBCRCON);
return 0;
}
/* PIC32 supports only 32bit read operation */
void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
{
void __iomem *fifo = hw_ep->fifo;
u32 val, rem = len % 4;
/* USB stack ensures dst is always 32bit aligned. */
readsl(fifo, dst, len / 4);
if (rem) {
dst += len & ~0x03;
val = musb_readl(fifo, 0);
memcpy(dst, &val, rem);
}
}
const struct musb_platform_ops pic32_musb_ops = {
.init = pic32_musb_init,
.set_mode = pic32_musb_set_mode,
.disable = pic32_musb_disable,
.enable = pic32_musb_enable,
};
/* PIC32 default FIFO config - fits in 8KB */
static struct musb_fifo_cfg pic32_musb_fifo_config[] = {
{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, },
{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, },
{ .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, },
{ .hw_ep_num = 2, .style = FIFO_RX, .maxpacket = 512, },
{ .hw_ep_num = 3, .style = FIFO_TX, .maxpacket = 512, },
{ .hw_ep_num = 3, .style = FIFO_RX, .maxpacket = 512, },
{ .hw_ep_num = 4, .style = FIFO_TX, .maxpacket = 512, },
{ .hw_ep_num = 4, .style = FIFO_RX, .maxpacket = 512, },
{ .hw_ep_num = 5, .style = FIFO_TX, .maxpacket = 512, },
{ .hw_ep_num = 5, .style = FIFO_RX, .maxpacket = 512, },
{ .hw_ep_num = 6, .style = FIFO_TX, .maxpacket = 512, },
{ .hw_ep_num = 6, .style = FIFO_RX, .maxpacket = 512, },
{ .hw_ep_num = 7, .style = FIFO_TX, .maxpacket = 512, },
{ .hw_ep_num = 7, .style = FIFO_RX, .maxpacket = 512, },
};
static struct musb_hdrc_config pic32_musb_config = {
.fifo_cfg = pic32_musb_fifo_config,
.fifo_cfg_size = ARRAY_SIZE(pic32_musb_fifo_config),
.multipoint = 1,
.dyn_fifo = 1,
.num_eps = 8,
.ram_bits = 11,
};
/* PIC32 has one MUSB controller which can be host or gadget */
static struct musb_hdrc_platform_data pic32_musb_plat = {
.mode = MUSB_HOST,
.config = &pic32_musb_config,
.power = 250, /* 500mA */
.platform_ops = &pic32_musb_ops,
};
static int musb_usb_probe(struct udevice *dev)
{
struct usb_bus_priv *priv = dev_get_uclass_priv(dev);
struct pic32_musb_data *pdata = dev_get_priv(dev);
struct musb_host_data *mdata = &pdata->mdata;
struct fdt_resource mc, glue;
void *fdt = (void *)gd->fdt_blob;
int node = dev_of_offset(dev);
void __iomem *mregs;
int ret;
priv->desc_before_addr = true;
ret = fdt_get_named_resource(fdt, node, "reg", "reg-names",
"mc", &mc);
if (ret < 0) {
printf("pic32-musb: resource \"mc\" not found\n");
return ret;
}
ret = fdt_get_named_resource(fdt, node, "reg", "reg-names",
"control", &glue);
if (ret < 0) {
printf("pic32-musb: resource \"control\" not found\n");
return ret;
}
mregs = ioremap(mc.start, fdt_resource_size(&mc));
pdata->musb_glue = ioremap(glue.start, fdt_resource_size(&glue));
/* init controller */
#ifdef CONFIG_USB_MUSB_HOST
mdata->host = musb_init_controller(&pic32_musb_plat,
&pdata->dev, mregs);
if (!mdata->host)
return -EIO;
ret = musb_lowlevel_init(mdata);
#else
pic32_musb_plat.mode = MUSB_PERIPHERAL;
ret = musb_register(&pic32_musb_plat, &pdata->dev, mregs);
#endif
if (ret == 0)
printf("PIC32 MUSB OTG\n");
return ret;
}
static int musb_usb_remove(struct udevice *dev)
{
struct pic32_musb_data *pdata = dev_get_priv(dev);
musb_stop(pdata->mdata.host);
return 0;
}
static const struct udevice_id pic32_musb_ids[] = {
{ .compatible = "microchip,pic32mzda-usb" },
{ }
};
U_BOOT_DRIVER(usb_musb) = {
.name = "pic32-musb",
.id = UCLASS_USB,
.of_match = pic32_musb_ids,
.probe = musb_usb_probe,
.remove = musb_usb_remove,
#ifdef CONFIG_USB_MUSB_HOST
.ops = &musb_usb_ops,
#endif
.platdata_auto_alloc_size = sizeof(struct usb_platdata),
.priv_auto_alloc_size = sizeof(struct pic32_musb_data),
};
Reference in a new issue View git blame Copy permalink