u-boot/arch/arc/lib/cpu.c
Alexey Brodkin 660d5f0d49 arc: move common sources in library
"reset.c" and "cpu.c" have no architecture-specific code at all.
Others are applicable to either ARC CPU.

This change is a preparation to submission of ARCv2 architecture port.

Even though ARCv1 and ARCv2 ISAs are not binary compatible most of
built-in modules still have the same programming model - AUX registers
are mapped in the same addresses and hold the same data (new featues
extend existing ones).

So only low-level assembly code (start-up, interrupt handlers) is left
as CPU(actually ISA)-specific. This significantyl simplifies maintenance
of multiple CPUs/ISAs.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Igor Guryanov <guryanov@synopsys.com>
2015-01-15 22:40:49 +03:00

47 lines
872 B
C

/*
* Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/arcregs.h>
#include <asm/cache.h>
DECLARE_GLOBAL_DATA_PTR;
int arch_cpu_init(void)
{
#ifdef CONFIG_SYS_ICACHE_OFF
icache_disable();
#else
icache_enable();
invalidate_icache_all();
#endif
flush_dcache_all();
#ifdef CONFIG_SYS_DCACHE_OFF
dcache_disable();
#else
dcache_enable();
#endif
timer_init();
/* In simulation (ISS) "CHIPID" and "ARCNUM" are all "ff" */
if ((read_aux_reg(ARC_AUX_IDENTITY) & 0xffffff00) == 0xffffff00)
gd->arch.running_on_hw = 0;
else
gd->arch.running_on_hw = 1;
gd->cpu_clk = CONFIG_SYS_CLK_FREQ;
gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
return 0;
}
int arch_early_init_r(void)
{
gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
return 0;
}