mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-30 00:21:06 +00:00
34196b0a8b
Replace call to imx_get_mpllclk with imx_get_armclk to show frequency of ARM core instead of mpll internal bus in print_cpuinfo. Signed-off-by: John Rigby <jcrigby@gmail.com> CC: Stefano Babic <sbabic@denx.de>
263 lines
6.5 KiB
C
263 lines
6.5 KiB
C
/*
|
|
* (C) Copyright 2009 DENX Software Engineering
|
|
* Author: John Rigby <jrigby@gmail.com>
|
|
*
|
|
* Based on mx27/generic.c:
|
|
* Copyright (c) 2008 Eric Jarrige <eric.jarrige@armadeus.org>
|
|
* Copyright (c) 2009 Ilya Yanok <yanok@emcraft.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <div64.h>
|
|
#include <netdev.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <asm/arch/imx25-pinmux.h>
|
|
#ifdef CONFIG_MXC_MMC
|
|
#include <asm/arch/mxcmmc.h>
|
|
#endif
|
|
|
|
/*
|
|
* get the system pll clock in Hz
|
|
*
|
|
* mfi + mfn / (mfd +1)
|
|
* f = 2 * f_ref * --------------------
|
|
* pd + 1
|
|
*/
|
|
static unsigned int imx_decode_pll (unsigned int pll, unsigned int f_ref)
|
|
{
|
|
unsigned int mfi = (pll >> CCM_PLL_MFI_SHIFT)
|
|
& CCM_PLL_MFI_MASK;
|
|
unsigned int mfn = (pll >> CCM_PLL_MFN_SHIFT)
|
|
& CCM_PLL_MFN_MASK;
|
|
unsigned int mfd = (pll >> CCM_PLL_MFD_SHIFT)
|
|
& CCM_PLL_MFD_MASK;
|
|
unsigned int pd = (pll >> CCM_PLL_PD_SHIFT)
|
|
& CCM_PLL_PD_MASK;
|
|
|
|
mfi = mfi <= 5 ? 5 : mfi;
|
|
|
|
return lldiv (2 * (u64) f_ref * (mfi * (mfd + 1) + mfn),
|
|
(mfd + 1) * (pd + 1));
|
|
}
|
|
|
|
static ulong imx_get_mpllclk (void)
|
|
{
|
|
struct ccm_regs *ccm = (struct ccm_regs *)IMX_CCM_BASE;
|
|
ulong fref = 24000000;
|
|
|
|
return imx_decode_pll (readl (&ccm->mpctl), fref);
|
|
}
|
|
|
|
ulong imx_get_armclk (void)
|
|
{
|
|
struct ccm_regs *ccm = (struct ccm_regs *)IMX_CCM_BASE;
|
|
ulong cctl = readl (&ccm->cctl);
|
|
ulong fref = imx_get_mpllclk ();
|
|
ulong div;
|
|
|
|
if (cctl & CCM_CCTL_ARM_SRC)
|
|
fref = lldiv ((fref * 3), 4);
|
|
|
|
div = ((cctl >> CCM_CCTL_ARM_DIV_SHIFT)
|
|
& CCM_CCTL_ARM_DIV_MASK) + 1;
|
|
|
|
return lldiv (fref, div);
|
|
}
|
|
|
|
ulong imx_get_ahbclk (void)
|
|
{
|
|
struct ccm_regs *ccm = (struct ccm_regs *)IMX_CCM_BASE;
|
|
ulong cctl = readl (&ccm->cctl);
|
|
ulong fref = imx_get_armclk ();
|
|
ulong div;
|
|
|
|
div = ((cctl >> CCM_CCTL_AHB_DIV_SHIFT)
|
|
& CCM_CCTL_AHB_DIV_MASK) + 1;
|
|
|
|
return lldiv (fref, div);
|
|
}
|
|
|
|
ulong imx_get_perclk (int clk)
|
|
{
|
|
struct ccm_regs *ccm = (struct ccm_regs *)IMX_CCM_BASE;
|
|
ulong fref = imx_get_ahbclk ();
|
|
ulong div;
|
|
|
|
div = readl (&ccm->pcdr[CCM_PERCLK_REG (clk)]);
|
|
div = ((div >> CCM_PERCLK_SHIFT (clk)) & CCM_PERCLK_MASK) + 1;
|
|
|
|
return lldiv (fref, div);
|
|
}
|
|
|
|
#if defined(CONFIG_DISPLAY_CPUINFO)
|
|
int print_cpuinfo (void)
|
|
{
|
|
char buf[32];
|
|
|
|
printf ("CPU: Freescale i.MX25 at %s MHz\n\n",
|
|
strmhz (buf, imx_get_armclk ()));
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
int cpu_eth_init (bd_t * bis)
|
|
{
|
|
#if defined(CONFIG_FEC_MXC)
|
|
struct ccm_regs *ccm = (struct ccm_regs *)IMX_CCM_BASE;
|
|
ulong val;
|
|
|
|
val = readl (&ccm->cgr0);
|
|
val |= (1 << 23);
|
|
writel (val, &ccm->cgr0);
|
|
return fecmxc_initialize (bis);
|
|
#else
|
|
return 0;
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* Initializes on-chip MMC controllers.
|
|
* to override, implement board_mmc_init()
|
|
*/
|
|
int cpu_mmc_init (bd_t * bis)
|
|
{
|
|
#ifdef CONFIG_MXC_MMC
|
|
return mxc_mmc_init (bis);
|
|
#else
|
|
return 0;
|
|
#endif
|
|
}
|
|
|
|
#ifdef CONFIG_MXC_UART
|
|
void mx25_uart_init_pins (void)
|
|
{
|
|
struct iomuxc_mux_ctl *muxctl;
|
|
struct iomuxc_pad_ctl *padctl;
|
|
u32 inpadctl;
|
|
u32 outpadctl;
|
|
u32 muxmode0;
|
|
|
|
muxctl = (struct iomuxc_mux_ctl *)IMX_IOPADMUX_BASE;
|
|
padctl = (struct iomuxc_pad_ctl *)IMX_IOPADCTL_BASE;
|
|
muxmode0 = MX25_PIN_MUX_MODE (0);
|
|
/*
|
|
* set up input pins with hysteresis and 100K pull-ups
|
|
*/
|
|
inpadctl = MX25_PIN_PAD_CTL_HYS
|
|
| MX25_PIN_PAD_CTL_PKE
|
|
| MX25_PIN_PAD_CTL_PUE | MX25_PIN_PAD_CTL_100K_PU;
|
|
|
|
/*
|
|
* set up output pins with 100K pull-downs
|
|
* FIXME: need to revisit this
|
|
* PUE is ignored if PKE is not set
|
|
* so the right value here is likely
|
|
* 0x0 for no pull up/down
|
|
* or
|
|
* 0xc0 for 100k pull down
|
|
*/
|
|
outpadctl = MX25_PIN_PAD_CTL_PUE | MX25_PIN_PAD_CTL_100K_PD;
|
|
|
|
/* UART1 */
|
|
/* rxd */
|
|
writel (muxmode0, &muxctl->pad_uart1_rxd);
|
|
writel (inpadctl, &padctl->pad_uart1_rxd);
|
|
|
|
/* txd */
|
|
writel (muxmode0, &muxctl->pad_uart1_txd);
|
|
writel (outpadctl, &padctl->pad_uart1_txd);
|
|
|
|
/* rts */
|
|
writel (muxmode0, &muxctl->pad_uart1_rts);
|
|
writel (outpadctl, &padctl->pad_uart1_rts);
|
|
|
|
/* cts */
|
|
writel (muxmode0, &muxctl->pad_uart1_cts);
|
|
writel (inpadctl, &padctl->pad_uart1_cts);
|
|
}
|
|
#endif /* CONFIG_MXC_UART */
|
|
|
|
#ifdef CONFIG_FEC_MXC
|
|
void mx25_fec_init_pins (void)
|
|
{
|
|
struct iomuxc_mux_ctl *muxctl;
|
|
struct iomuxc_pad_ctl *padctl;
|
|
u32 inpadctl_100kpd;
|
|
u32 inpadctl_22kpu;
|
|
u32 outpadctl;
|
|
u32 muxmode0;
|
|
|
|
muxctl = (struct iomuxc_mux_ctl *)IMX_IOPADMUX_BASE;
|
|
padctl = (struct iomuxc_pad_ctl *)IMX_IOPADCTL_BASE;
|
|
muxmode0 = MX25_PIN_MUX_MODE (0);
|
|
inpadctl_100kpd = MX25_PIN_PAD_CTL_HYS
|
|
| MX25_PIN_PAD_CTL_PKE
|
|
| MX25_PIN_PAD_CTL_PUE | MX25_PIN_PAD_CTL_100K_PD;
|
|
inpadctl_22kpu = MX25_PIN_PAD_CTL_HYS
|
|
| MX25_PIN_PAD_CTL_PKE
|
|
| MX25_PIN_PAD_CTL_PUE | MX25_PIN_PAD_CTL_22K_PU;
|
|
/*
|
|
* set up output pins with 100K pull-downs
|
|
* FIXME: need to revisit this
|
|
* PUE is ignored if PKE is not set
|
|
* so the right value here is likely
|
|
* 0x0 for no pull
|
|
* or
|
|
* 0xc0 for 100k pull down
|
|
*/
|
|
outpadctl = MX25_PIN_PAD_CTL_PUE | MX25_PIN_PAD_CTL_100K_PD;
|
|
|
|
/* FEC_TX_CLK */
|
|
writel (muxmode0, &muxctl->pad_fec_tx_clk);
|
|
writel (inpadctl_100kpd, &padctl->pad_fec_tx_clk);
|
|
|
|
/* FEC_RX_DV */
|
|
writel (muxmode0, &muxctl->pad_fec_rx_dv);
|
|
writel (inpadctl_100kpd, &padctl->pad_fec_rx_dv);
|
|
|
|
/* FEC_RDATA0 */
|
|
writel (muxmode0, &muxctl->pad_fec_rdata0);
|
|
writel (inpadctl_100kpd, &padctl->pad_fec_rdata0);
|
|
|
|
/* FEC_TDATA0 */
|
|
writel (muxmode0, &muxctl->pad_fec_tdata0);
|
|
writel (outpadctl, &padctl->pad_fec_tdata0);
|
|
|
|
/* FEC_TX_EN */
|
|
writel (muxmode0, &muxctl->pad_fec_tx_en);
|
|
writel (outpadctl, &padctl->pad_fec_tx_en);
|
|
|
|
/* FEC_MDC */
|
|
writel (muxmode0, &muxctl->pad_fec_mdc);
|
|
writel (outpadctl, &padctl->pad_fec_mdc);
|
|
|
|
/* FEC_MDIO */
|
|
writel (muxmode0, &muxctl->pad_fec_mdio);
|
|
writel (inpadctl_22kpu, &padctl->pad_fec_mdio);
|
|
|
|
/* FEC_RDATA1 */
|
|
writel (muxmode0, &muxctl->pad_fec_rdata1);
|
|
writel (inpadctl_100kpd, &padctl->pad_fec_rdata1);
|
|
|
|
/* FEC_TDATA1 */
|
|
writel (muxmode0, &muxctl->pad_fec_tdata1);
|
|
writel (outpadctl, &padctl->pad_fec_tdata1);
|
|
|
|
}
|
|
#endif /* CONFIG_FEC_MXC */
|