mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-14 23:33:00 +00:00
0459bc30b6
OMAP5432 did go into production with AVS class0 registers which were mutually exclusive from AVS Class 1.5 registers. Most OMAP5-uEVM boards use the pre-production Class1.5 which has production efuse registers set to 0. However on production devices, these are set to valid data. scale_vcore logic is already smart enough to detect this and use the "Nominal voltage" on devices that do not have efuse registers populated. On a test production device populated as follows: MPU OPP_NOM: => md.l 0x04A0021C4 1 4a0021c4: 03a003e9 .... (0x3e9 = 1.01v) vs nom voltage of 1.06v MPU OPP_HIGH: => md.l 0x04A0021C8 1 4a0021c8: 03400485 ..@. MM OPP_NOM: => md.l 0x04A0021A4 1 4a0021a4: 038003d4 .... (0x3d4 = 980mV) vs nom voltage of 1.025v MM OPP_OD: => md.l 0x04A0021A8 1 4a0021a8: 03600403 ..`. CORE OPP_NOM: => md.l 0x04A0021D8 1 4a0021d8: 000003cf .... (0x3cf = 975mV) vs nom voltage of 1.040v Since the efuse values are'nt currently used, we do not regress on existing pre-production samples (they continue to use nominal voltage). But on boards that do have production samples populated, we can leverage the optimal voltages necessary for proper operation. Tested on: a) 720-2644-001 OMAP5UEVM with production sample. b) 750-2628-222(A) UEVM5432G-02 with pre-production sample. Data based on OMAP5432 Technical reference Manual SWPU282AF (May 2012-Revised Aug 2016) NOTE: All collaterals on OMAP5432 silicon itself seems to have been removed from ti.com, though EVM details are still available: http://www.ti.com/tool/OMAP5432-EVM Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
267 lines
7.7 KiB
C
267 lines
7.7 KiB
C
/*
|
|
* (C) Copyright 2010
|
|
* Texas Instruments, <www.ti.com>
|
|
*
|
|
* Authors:
|
|
* Aneesh V <aneesh@ti.com>
|
|
* Sricharan R <r.sricharan@ti.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef _OMAP5_H_
|
|
#define _OMAP5_H_
|
|
|
|
#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
|
|
#include <asm/types.h>
|
|
#endif /* !(__KERNEL_STRICT_NAMES || __ASSEMBLY__) */
|
|
|
|
#include <linux/sizes.h>
|
|
|
|
/*
|
|
* L4 Peripherals - L4 Wakeup and L4 Core now
|
|
*/
|
|
#define OMAP54XX_L4_CORE_BASE 0x4A000000
|
|
#define OMAP54XX_L4_WKUP_BASE 0x4Ae00000
|
|
#define OMAP54XX_L4_PER_BASE 0x48000000
|
|
|
|
/* CONTROL ID CODE */
|
|
#define CONTROL_CORE_ID_CODE 0x4A002204
|
|
#define CONTROL_WKUP_ID_CODE 0x4AE0C204
|
|
|
|
#if defined(CONFIG_DRA7XX)
|
|
#define CONTROL_ID_CODE CONTROL_WKUP_ID_CODE
|
|
#else
|
|
#define CONTROL_ID_CODE CONTROL_CORE_ID_CODE
|
|
#endif
|
|
|
|
#if defined(CONFIG_DRA7XX)
|
|
#define DRA7_USB_OTG_SS1_BASE 0x48890000
|
|
#define DRA7_USB_OTG_SS1_GLUE_BASE 0x48880000
|
|
#define DRA7_USB3_PHY1_PLL_CTRL 0x4A084C00
|
|
#define DRA7_USB3_PHY1_POWER 0x4A002370
|
|
#define DRA7_USB2_PHY1_POWER 0x4A002300
|
|
|
|
#define DRA7_USB_OTG_SS2_BASE 0x488D0000
|
|
#define DRA7_USB_OTG_SS2_GLUE_BASE 0x488C0000
|
|
#define DRA7_USB2_PHY2_POWER 0x4A002E74
|
|
#else
|
|
#define OMAP5XX_USB_OTG_SS_BASE 0x4A030000
|
|
#define OMAP5XX_USB_OTG_SS_GLUE_BASE 0x4A020000
|
|
#define OMAP5XX_USB3_PHY_PLL_CTRL 0x4A084C00
|
|
#define OMAP5XX_USB3_PHY_POWER 0x4A002370
|
|
#define OMAP5XX_USB2_PHY_POWER 0x4A002300
|
|
#endif
|
|
|
|
/* To be verified */
|
|
#define OMAP5430_CONTROL_ID_CODE_ES1_0 0x0B94202F
|
|
#define OMAP5430_CONTROL_ID_CODE_ES2_0 0x1B94202F
|
|
#define OMAP5432_CONTROL_ID_CODE_ES1_0 0x0B99802F
|
|
#define OMAP5432_CONTROL_ID_CODE_ES2_0 0x1B99802F
|
|
#define DRA752_CONTROL_ID_CODE_ES1_0 0x0B99002F
|
|
#define DRA752_CONTROL_ID_CODE_ES1_1 0x1B99002F
|
|
#define DRA752_CONTROL_ID_CODE_ES2_0 0x2B99002F
|
|
#define DRA722_CONTROL_ID_CODE_ES1_0 0x0B9BC02F
|
|
#define DRA722_CONTROL_ID_CODE_ES2_0 0x1B9BC02F
|
|
|
|
/* UART */
|
|
#define UART1_BASE (OMAP54XX_L4_PER_BASE + 0x6a000)
|
|
#define UART2_BASE (OMAP54XX_L4_PER_BASE + 0x6c000)
|
|
#define UART3_BASE (OMAP54XX_L4_PER_BASE + 0x20000)
|
|
#define UART4_BASE (OMAP54XX_L4_PER_BASE + 0x6e000)
|
|
|
|
/* General Purpose Timers */
|
|
#define GPT1_BASE (OMAP54XX_L4_WKUP_BASE + 0x18000)
|
|
#define GPT2_BASE (OMAP54XX_L4_PER_BASE + 0x32000)
|
|
#define GPT3_BASE (OMAP54XX_L4_PER_BASE + 0x34000)
|
|
|
|
/* Watchdog Timer2 - MPU watchdog */
|
|
#define WDT2_BASE (OMAP54XX_L4_WKUP_BASE + 0x14000)
|
|
|
|
/* QSPI */
|
|
#define QSPI_BASE 0x4B300000
|
|
|
|
/* SATA */
|
|
#define DWC_AHSATA_BASE 0x4A140000
|
|
|
|
/*
|
|
* Hardware Register Details
|
|
*/
|
|
|
|
/* Watchdog Timer */
|
|
#define WD_UNLOCK1 0xAAAA
|
|
#define WD_UNLOCK2 0x5555
|
|
|
|
/* GP Timer */
|
|
#define TCLR_ST (0x1 << 0)
|
|
#define TCLR_AR (0x1 << 1)
|
|
#define TCLR_PRE (0x1 << 5)
|
|
|
|
/* Control Module */
|
|
#define LDOSRAM_ACTMODE_VSET_IN_MASK (0x1F << 5)
|
|
#define LDOSRAM_VOLT_CTRL_OVERRIDE 0x0401040f
|
|
#define CONTROL_EFUSE_1_OVERRIDE 0x1C4D0110
|
|
#define CONTROL_EFUSE_2_OVERRIDE 0x00084000
|
|
|
|
/* LPDDR2 IO regs */
|
|
#define CONTROL_LPDDR2IO_SLEW_125PS_DRV8_PULL_DOWN 0x1C1C1C1C
|
|
#define CONTROL_LPDDR2IO_SLEW_325PS_DRV8_GATE_KEEPER 0x9E9E9E9E
|
|
#define CONTROL_LPDDR2IO_SLEW_315PS_DRV12_PULL_DOWN 0x7C7C7C7C
|
|
#define LPDDR2IO_GR10_WD_MASK (3 << 17)
|
|
#define CONTROL_LPDDR2IO_3_VAL 0xA0888C00
|
|
|
|
/* CONTROL_EFUSE_2 */
|
|
#define CONTROL_EFUSE_2_NMOS_PMOS_PTV_CODE_1 0x00ffc000
|
|
|
|
#define SDCARD_BIAS_PWRDNZ (1 << 27)
|
|
#define SDCARD_PWRDNZ (1 << 26)
|
|
#define SDCARD_BIAS_HIZ_MODE (1 << 25)
|
|
#define SDCARD_PBIASLITE_VMODE (1 << 21)
|
|
|
|
#ifndef __ASSEMBLY__
|
|
|
|
struct s32ktimer {
|
|
unsigned char res[0x10];
|
|
unsigned int s32k_cr; /* 0x10 */
|
|
};
|
|
|
|
#define DEVICE_TYPE_SHIFT 0x6
|
|
#define DEVICE_TYPE_MASK (0x7 << DEVICE_TYPE_SHIFT)
|
|
|
|
/* Output impedance control */
|
|
#define ds_120_ohm 0x0
|
|
#define ds_60_ohm 0x1
|
|
#define ds_45_ohm 0x2
|
|
#define ds_30_ohm 0x3
|
|
#define ds_mask 0x3
|
|
|
|
/* Slew rate control */
|
|
#define sc_slow 0x0
|
|
#define sc_medium 0x1
|
|
#define sc_fast 0x2
|
|
#define sc_na 0x3
|
|
#define sc_mask 0x3
|
|
|
|
/* Target capacitance control */
|
|
#define lb_5_12_pf 0x0
|
|
#define lb_12_25_pf 0x1
|
|
#define lb_25_50_pf 0x2
|
|
#define lb_50_80_pf 0x3
|
|
#define lb_mask 0x3
|
|
|
|
#define usb_i_mask 0x7
|
|
|
|
#define DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN 0x80828082
|
|
#define DDR_IO_I_34OHM_SR_FASTEST_WD_CK_CKE_NCS_CA_PULL_DOWN 0x82828200
|
|
#define DDR_IO_0_DDR2_DQ_INT_EN_ALL_DDR3_CA_DIS_ALL 0x8421
|
|
#define DDR_IO_1_DQ_OUT_EN_ALL_DQ_INT_EN_ALL 0x8421084
|
|
#define DDR_IO_2_CA_OUT_EN_ALL_CA_INT_EN_ALL 0x8421000
|
|
|
|
#define DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL 0x7C7C7C6C
|
|
#define DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL 0x64646464
|
|
#define DDR_IO_0_VREF_CELLS_DDR3_VALUE 0xBAE8C631
|
|
#define DDR_IO_1_VREF_CELLS_DDR3_VALUE 0xBC6318DC
|
|
#define DDR_IO_2_VREF_CELLS_DDR3_VALUE 0x0
|
|
|
|
#define DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL_ES2 0x7C7C7C7C
|
|
#define DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL_ES2 0x64646464
|
|
#define DDR_IO_0_VREF_CELLS_DDR3_VALUE_ES2 0xBAE8C631
|
|
#define DDR_IO_1_VREF_CELLS_DDR3_VALUE_ES2 0xBC6318DC
|
|
#define DDR_IO_2_VREF_CELLS_DDR3_VALUE_ES2 0x84210000
|
|
|
|
#define EFUSE_1 0x45145100
|
|
#define EFUSE_2 0x45145100
|
|
#define EFUSE_3 0x45145100
|
|
#define EFUSE_4 0x45145100
|
|
#endif /* __ASSEMBLY__ */
|
|
|
|
/*
|
|
* In all cases, the TRM defines the RAM Memory Map for the processor
|
|
* and indicates the area for the downloaded image. We use all of that
|
|
* space for download and once up and running may use other parts of the
|
|
* map for our needs. We set a scratch space that is at the end of the
|
|
* OMAP5 download area, but within the DRA7xx download area (as it is
|
|
* much larger) and do not, at this time, make use of the additional
|
|
* space.
|
|
*/
|
|
#if defined(CONFIG_DRA7XX)
|
|
#define NON_SECURE_SRAM_START 0x40300000
|
|
#define NON_SECURE_SRAM_END 0x40380000 /* Not inclusive */
|
|
#define NON_SECURE_SRAM_IMG_END 0x4037C000
|
|
#else
|
|
#define NON_SECURE_SRAM_START 0x40300000
|
|
#define NON_SECURE_SRAM_END 0x40320000 /* Not inclusive */
|
|
#define NON_SECURE_SRAM_IMG_END 0x4031E000
|
|
#endif
|
|
#define SRAM_SCRATCH_SPACE_ADDR (NON_SECURE_SRAM_IMG_END - SZ_1K)
|
|
|
|
/* base address for indirect vectors (internal boot mode) */
|
|
#define SRAM_ROM_VECT_BASE 0x4031F000
|
|
|
|
/* CONTROL_SRCOMP_XXX_SIDE */
|
|
#define OVERRIDE_XS_SHIFT 30
|
|
#define OVERRIDE_XS_MASK (1 << 30)
|
|
#define SRCODE_READ_XS_SHIFT 12
|
|
#define SRCODE_READ_XS_MASK (0xff << 12)
|
|
#define PWRDWN_XS_SHIFT 11
|
|
#define PWRDWN_XS_MASK (1 << 11)
|
|
#define DIVIDE_FACTOR_XS_SHIFT 4
|
|
#define DIVIDE_FACTOR_XS_MASK (0x7f << 4)
|
|
#define MULTIPLY_FACTOR_XS_SHIFT 1
|
|
#define MULTIPLY_FACTOR_XS_MASK (0x7 << 1)
|
|
#define SRCODE_OVERRIDE_SEL_XS_SHIFT 0
|
|
#define SRCODE_OVERRIDE_SEL_XS_MASK (1 << 0)
|
|
|
|
/* ABB settings */
|
|
#define OMAP_ABB_SETTLING_TIME 50
|
|
#define OMAP_ABB_CLOCK_CYCLES 16
|
|
|
|
/* ABB tranxdone mask */
|
|
#define OMAP_ABB_MPU_TXDONE_MASK (0x1 << 7)
|
|
#define OMAP_ABB_MM_TXDONE_MASK (0x1 << 31)
|
|
#define OMAP_ABB_IVA_TXDONE_MASK (0x1 << 30)
|
|
#define OMAP_ABB_EVE_TXDONE_MASK (0x1 << 29)
|
|
#define OMAP_ABB_GPU_TXDONE_MASK (0x1 << 28)
|
|
|
|
/* ABB efuse masks */
|
|
#define OMAP5_PROD_ABB_FUSE_VSET_MASK (0x1F << 20)
|
|
#define OMAP5_PROD_ABB_FUSE_ENABLE_MASK (0x1 << 25)
|
|
#define DRA7_ABB_FUSE_VSET_MASK (0x1F << 20)
|
|
#define DRA7_ABB_FUSE_ENABLE_MASK (0x1 << 25)
|
|
#define OMAP5_ABB_LDOVBBMPU_MUX_CTRL_MASK (0x1 << 10)
|
|
#define OMAP5_ABB_LDOVBBMPU_VSET_OUT_MASK (0x1f << 0)
|
|
|
|
#ifndef __ASSEMBLY__
|
|
struct srcomp_params {
|
|
s8 divide_factor;
|
|
s8 multiply_factor;
|
|
};
|
|
|
|
struct ctrl_ioregs {
|
|
u32 ctrl_ddrch;
|
|
u32 ctrl_lpddr2ch;
|
|
u32 ctrl_ddr3ch;
|
|
u32 ctrl_ddrio_0;
|
|
u32 ctrl_ddrio_1;
|
|
u32 ctrl_ddrio_2;
|
|
u32 ctrl_emif_sdram_config_ext;
|
|
u32 ctrl_emif_sdram_config_ext_final;
|
|
u32 ctrl_ddr_ctrl_ext_0;
|
|
};
|
|
|
|
void clrset_spare_register(u8 spare_type, u32 clear_bits, u32 set_bits);
|
|
|
|
#endif /* __ASSEMBLY__ */
|
|
|
|
/* Boot parameters */
|
|
#ifndef __ASSEMBLY__
|
|
struct omap_boot_parameters {
|
|
unsigned int boot_message;
|
|
unsigned int boot_device_descriptor;
|
|
unsigned char boot_device;
|
|
unsigned char reset_reason;
|
|
unsigned char ch_flags;
|
|
};
|
|
#endif
|
|
|
|
#endif
|