mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-15 01:17:39 +00:00
adbe138a90
Mark the memory node with u-boot,dm-spl so we can use it from early SPL. Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
242 lines
5.8 KiB
Text
242 lines
5.8 KiB
Text
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include "k3-am642.dtsi"
|
|
#include "k3-am64-evm-ddr4-1600MTs.dtsi"
|
|
#include "k3-am64-ddr.dtsi"
|
|
|
|
/ {
|
|
chosen {
|
|
stdout-path = "serial2:115200n8";
|
|
tick-timer = &timer1;
|
|
};
|
|
|
|
aliases {
|
|
remoteproc0 = &sysctrler;
|
|
remoteproc1 = &a53_0;
|
|
};
|
|
|
|
memory@80000000 {
|
|
device_type = "memory";
|
|
/* 2G RAM */
|
|
reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
|
|
|
|
u-boot,dm-spl;
|
|
};
|
|
|
|
a53_0: a53@0 {
|
|
compatible = "ti,am654-rproc";
|
|
reg = <0x00 0x00a90000 0x00 0x10>;
|
|
power-domains = <&k3_pds 61 TI_SCI_PD_EXCLUSIVE>,
|
|
<&k3_pds 135 TI_SCI_PD_EXCLUSIVE>;
|
|
resets = <&k3_reset 135 0>;
|
|
clocks = <&k3_clks 61 0>;
|
|
assigned-clocks = <&k3_clks 61 0>, <&k3_clks 135 0>;
|
|
assigned-clock-parents = <&k3_clks 61 2>;
|
|
assigned-clock-rates = <200000000>, <1000000000>;
|
|
ti,sci = <&dmsc>;
|
|
ti,sci-proc-id = <32>;
|
|
ti,sci-host-id = <10>;
|
|
u-boot,dm-spl;
|
|
};
|
|
|
|
reserved-memory {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
secure_ddr: optee@9e800000 {
|
|
reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
|
|
alignment = <0x1000>;
|
|
no-map;
|
|
};
|
|
};
|
|
|
|
clk_200mhz: dummy-clock-200mhz {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <200000000>;
|
|
u-boot,dm-spl;
|
|
};
|
|
|
|
vtt_supply: vtt-supply {
|
|
compatible = "regulator-gpio";
|
|
regulator-name = "vtt";
|
|
regulator-min-microvolt = <0>;
|
|
regulator-max-microvolt = <3300000>;
|
|
gpios = <&main_gpio0 12 GPIO_ACTIVE_HIGH>;
|
|
states = <0 0x0 3300000 0x1>;
|
|
u-boot,dm-spl;
|
|
};
|
|
};
|
|
|
|
&cbass_main {
|
|
sysctrler: sysctrler {
|
|
compatible = "ti,am654-system-controller";
|
|
mboxes= <&secure_proxy_main 1>, <&secure_proxy_main 0>;
|
|
mbox-names = "tx", "rx";
|
|
u-boot,dm-spl;
|
|
};
|
|
};
|
|
|
|
&cbass_main {
|
|
main_esm: esm@420000 {
|
|
compatible = "ti,j721e-esm";
|
|
reg = <0x0 0x420000 0x0 0x1000>;
|
|
ti,esm-pins = <160>, <161>;
|
|
u-boot,dm-spl;
|
|
};
|
|
};
|
|
|
|
&cbass_mcu {
|
|
u-boot,dm-spl;
|
|
mcu_esm: esm@4100000 {
|
|
compatible = "ti,j721e-esm";
|
|
reg = <0x0 0x4100000 0x0 0x1000>;
|
|
ti,esm-pins = <0>, <1>;
|
|
u-boot,dm-spl;
|
|
};
|
|
};
|
|
|
|
&main_pmx0 {
|
|
u-boot,dm-spl;
|
|
main_uart0_pins_default: main-uart0-pins-default {
|
|
u-boot,dm-spl;
|
|
pinctrl-single,pins = <
|
|
AM64X_IOPAD(0x0238, PIN_INPUT, 0) /* (B16) UART0_CTSn */
|
|
AM64X_IOPAD(0x023c, PIN_OUTPUT, 0) /* (A16) UART0_RTSn */
|
|
AM64X_IOPAD(0x0230, PIN_INPUT, 0) /* (D15) UART0_RXD */
|
|
AM64X_IOPAD(0x0234, PIN_OUTPUT, 0) /* (C16) UART0_TXD */
|
|
>;
|
|
};
|
|
|
|
main_uart1_pins_default: main-uart1-pins-default {
|
|
u-boot,dm-spl;
|
|
pinctrl-single,pins = <
|
|
AM64X_IOPAD(0x0248, PIN_INPUT, 0) /* (D16) UART1_CTSn */
|
|
AM64X_IOPAD(0x024c, PIN_OUTPUT, 0) /* (E16) UART1_RTSn */
|
|
AM64X_IOPAD(0x0240, PIN_INPUT, 0) /* (E15) UART1_RXD */
|
|
AM64X_IOPAD(0x0244, PIN_OUTPUT, 0) /* (E14) UART1_TXD */
|
|
>;
|
|
};
|
|
|
|
main_mmc0_pins_default: main-mmc0-pins-default {
|
|
u-boot,dm-spl;
|
|
pinctrl-single,pins = <
|
|
AM64X_IOPAD(0x01a8, PIN_INPUT_PULLDOWN, 0) /* (B25) MMC0_CLK */
|
|
AM64X_IOPAD(0x01aC, PIN_INPUT_PULLUP, 0) /* (B27) MMC0_CMD */
|
|
AM64X_IOPAD(0x01a4, PIN_INPUT_PULLUP, 0) /* (A26) MMC0_DAT0 */
|
|
AM64X_IOPAD(0x01a0, PIN_INPUT_PULLUP, 0) /* (E25) MMC0_DAT1 */
|
|
AM64X_IOPAD(0x019c, PIN_INPUT_PULLUP, 0) /* (C26) MMC0_DAT2 */
|
|
AM64X_IOPAD(0x0198, PIN_INPUT_PULLUP, 0) /* (A25) MMC0_DAT3 */
|
|
AM64X_IOPAD(0x0194, PIN_INPUT_PULLUP, 0) /* (E24) MMC0_DAT4 */
|
|
AM64X_IOPAD(0x0190, PIN_INPUT_PULLUP, 0) /* (A24) MMC0_DAT5 */
|
|
AM64X_IOPAD(0x018c, PIN_INPUT_PULLUP, 0) /* (B26) MMC0_DAT6 */
|
|
AM64X_IOPAD(0x0188, PIN_INPUT_PULLUP, 0) /* (D25) MMC0_DAT7 */
|
|
AM64X_IOPAD(0x01b0, PIN_INPUT, 0) /* (C25) MMC0_DS */
|
|
>;
|
|
};
|
|
|
|
main_mmc1_pins_default: main-mmc1-pins-default {
|
|
u-boot,dm-spl;
|
|
pinctrl-single,pins = <
|
|
AM64X_IOPAD(0x0294, PIN_INPUT_PULLUP, 0) /* (J19) MMC1_CMD */
|
|
AM64X_IOPAD(0x028c, PIN_INPUT_PULLDOWN, 0) /* (L20) MMC1_CLK */
|
|
AM64X_IOPAD(0x0288, PIN_INPUT_PULLUP, 0) /* (K21) MMC1_DAT0 */
|
|
AM64X_IOPAD(0x0284, PIN_INPUT_PULLUP, 0) /* (L21) MMC1_DAT1 */
|
|
AM64X_IOPAD(0x0280, PIN_INPUT_PULLUP, 0) /* (K19) MMC1_DAT2 */
|
|
AM64X_IOPAD(0x027c, PIN_INPUT_PULLUP, 0) /* (K18) MMC1_DAT3 */
|
|
AM64X_IOPAD(0x0298, PIN_INPUT_PULLUP, 0) /* (D19) MMC1_SDCD */
|
|
AM64X_IOPAD(0x029c, PIN_INPUT_PULLUP, 0) /* (C20) MMC1_SDWP */
|
|
>;
|
|
};
|
|
|
|
ddr_vtt_pins_default: ddr-vtt-pins-default {
|
|
u-boot,dm-spl;
|
|
pinctrl-single,pins = <
|
|
AM64X_IOPAD(0x0030, PIN_OUTPUT_PULLUP, 7) /* (L18) OSPI0_CSN1.GPIO0_12 */
|
|
>;
|
|
};
|
|
|
|
main_usb0_pins_default: main-usb0-pins-default {
|
|
pinctrl-single,pins = <
|
|
AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */
|
|
>;
|
|
};
|
|
};
|
|
|
|
&dmsc {
|
|
mboxes= <&secure_proxy_main 0>,
|
|
<&secure_proxy_main 1>,
|
|
<&secure_proxy_main 0>;
|
|
mbox-names = "rx", "tx", "notify";
|
|
ti,host-id = <35>;
|
|
ti,secure-host;
|
|
};
|
|
|
|
&main_uart0 {
|
|
/delete-property/ power-domains;
|
|
/delete-property/ clocks;
|
|
/delete-property/ clock-names;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&main_uart0_pins_default>;
|
|
status = "okay";
|
|
};
|
|
|
|
&main_uart1 {
|
|
u-boot,dm-spl;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&main_uart1_pins_default>;
|
|
};
|
|
|
|
&memorycontroller {
|
|
vtt-supply = <&vtt_supply>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&ddr_vtt_pins_default>;
|
|
};
|
|
|
|
&sdhci0 {
|
|
/delete-property/ power-domains;
|
|
clocks = <&clk_200mhz>;
|
|
clock-names = "clk_xin";
|
|
ti,driver-strength-ohm = <50>;
|
|
disable-wp;
|
|
pinctrl-0 = <&main_mmc0_pins_default>;
|
|
};
|
|
|
|
&sdhci1 {
|
|
/delete-property/ power-domains;
|
|
clocks = <&clk_200mhz>;
|
|
clock-names = "clk_xin";
|
|
ti,driver-strength-ohm = <50>;
|
|
disable-wp;
|
|
pinctrl-0 = <&main_mmc1_pins_default>;
|
|
};
|
|
|
|
&main_gpio0 {
|
|
u-boot,dm-spl;
|
|
/delete-property/ power-domains;
|
|
};
|
|
|
|
/* EEPROM might be read before SYSFW is available */
|
|
&main_i2c0 {
|
|
/delete-property/ power-domains;
|
|
};
|
|
|
|
&usbss0 {
|
|
ti,vbus-divider;
|
|
ti,usb2-only;
|
|
};
|
|
|
|
&usb0 {
|
|
dr_mode = "otg";
|
|
maximum-speed = "high-speed";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&main_usb0_pins_default>;
|
|
};
|
|
|
|
#include "k3-am642-evm-u-boot.dtsi"
|