u-boot/board/armadeus/apf27/lowlevel_init.S
Rob Herring 7682a99826 remove unnecessary version.h includes
Various files are needlessly rebuilt every time due to the version and
build time changing. As version.h is not actually needed, remove the
include.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Tom Warren <twarren@nvidia.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Macpaul Lin <macpaul@andestech.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: York Sun <yorksun@freescale.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Simon Glass <sjg@chromium.org>
Cc: Philippe Reynes <tremyfr@yahoo.fr>
Cc: Eric Jarrige <eric.jarrige@armadeus.org>
Cc: "David Müller" <d.mueller@elsoft.ch>
Cc: Phil Edworthy <phil.edworthy@renesas.com>
Cc: Robert Baldyga <r.baldyga@samsung.com>
Cc: Torsten Koschorrek <koschorrek@synertronixx.de>
Cc: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Łukasz Majewski <l.majewski@samsung.com>
2015-03-24 10:50:50 -04:00

167 lines
3.4 KiB
ArmAsm

/*
* (C) Copyright 2013 Philippe Reynes <tremyfr@yahoo.fr>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <config.h>
#include <generated/asm-offsets.h>
#include <asm/macro.h>
#include <asm/arch/imx-regs.h>
#include "apf27.h"
.macro init_aipi
/*
* setup AIPI1 and AIPI2
*/
write32 AIPI1_PSR0, ACFG_AIPI1_PSR0_VAL
write32 AIPI1_PSR1, ACFG_AIPI1_PSR1_VAL
write32 AIPI2_PSR0, ACFG_AIPI2_PSR0_VAL
write32 AIPI2_PSR1, ACFG_AIPI2_PSR1_VAL
/* Change SDRAM signal strengh */
ldr r0, =GPCR
ldr r1, =ACFG_GPCR_VAL
ldr r5, [r0]
orr r5, r5, r1
str r5, [r0]
.endm /* init_aipi */
.macro init_clock
ldr r0, =CSCR
/* disable MPLL/SPLL first */
ldr r1, [r0]
bic r1, r1, #(CSCR_MPEN|CSCR_SPEN)
str r1, [r0]
/*
* pll clock initialization predefined in apf27.h
*/
write32 MPCTL0, ACFG_MPCTL0_VAL
write32 SPCTL0, ACFG_SPCTL0_VAL
write32 CSCR, ACFG_CSCR_VAL|CSCR_MPLL_RESTART|CSCR_SPLL_RESTART
/*
* add some delay here
*/
mov r1, #0x1000
1: subs r1, r1, #0x1
bne 1b
/* peripheral clock divider */
write32 PCDR0, ACFG_PCDR0_VAL
write32 PCDR1, ACFG_PCDR1_VAL
/* Configure PCCR0 and PCCR1 */
write32 PCCR0, ACFG_PCCR0_VAL
write32 PCCR1, ACFG_PCCR1_VAL
.endm /* init_clock */
.macro init_ddr
/* wait for SDRAM/LPDDR ready (SDRAMRDY) */
ldr r0, =IMX_ESD_BASE
ldr r4, =ESDMISC_SDRAM_RDY
2: ldr r1, [r0, #ESDMISC_ROF]
ands r1, r1, r4
bpl 2b
/* LPDDR Soft Reset Mobile/Low Power DDR SDRAM. */
ldr r0, =IMX_ESD_BASE
ldr r4, =ACFG_ESDMISC_VAL
orr r1, r4, #ESDMISC_MDDR_DL_RST
str r1, [r0, #ESDMISC_ROF]
/* Hold for more than 200ns */
ldr r1, =0x10000
1: subs r1, r1, #0x1
bne 1b
str r4, [r0]
ldr r0, =IMX_ESD_BASE
ldr r1, =ACFG_SDRAM_ESDCFG_REGISTER_VAL
str r1, [r0, #ESDCFG0_ROF]
ldr r0, =IMX_ESD_BASE
ldr r1, =ACFG_PRECHARGE_CMD
str r1, [r0, #ESDCTL0_ROF]
/* write8(0xA0001000, any value) */
ldr r1, =PHYS_SDRAM_1+ACFG_SDRAM_PRECHARGE_ALL_VAL
strb r2, [r1]
ldr r1, =ACFG_AUTOREFRESH_CMD
str r1, [r0, #ESDCTL0_ROF]
ldr r4, =PHYS_SDRAM_1 /* CSD0 base address */
ldr r6,=0x7 /* load loop counter */
1: str r5,[r4] /* run auto-refresh cycle to array 0 */
subs r6,r6,#1
bne 1b
ldr r1, =ACFG_SET_MODE_REG_CMD
str r1, [r0, #ESDCTL0_ROF]
/* set standard mode register */
ldr r4, = PHYS_SDRAM_1+ACFG_SDRAM_MODE_REGISTER_VAL
strb r2, [r4]
/* set extended mode register */
ldr r4, =PHYS_SDRAM_1+ACFG_SDRAM_EXT_MODE_REGISTER_VAL
strb r5, [r4]
ldr r1, =ACFG_NORMAL_RW_CMD
str r1, [r0, #ESDCTL0_ROF]
/* 2nd sdram */
ldr r0, =IMX_ESD_BASE
ldr r1, =ACFG_SDRAM_ESDCFG_REGISTER_VAL
str r1, [r0, #ESDCFG1_ROF]
ldr r0, =IMX_ESD_BASE
ldr r1, =ACFG_PRECHARGE_CMD
str r1, [r0, #ESDCTL1_ROF]
/* write8(0xB0001000, any value) */
ldr r1, =PHYS_SDRAM_2+ACFG_SDRAM_PRECHARGE_ALL_VAL
strb r2, [r1]
ldr r1, =ACFG_AUTOREFRESH_CMD
str r1, [r0, #ESDCTL1_ROF]
ldr r4, =PHYS_SDRAM_2 /* CSD1 base address */
ldr r6,=0x7 /* load loop counter */
1: str r5,[r4] /* run auto-refresh cycle to array 0 */
subs r6,r6,#1
bne 1b
ldr r1, =ACFG_SET_MODE_REG_CMD
str r1, [r0, #ESDCTL1_ROF]
/* set standard mode register */
ldr r4, =PHYS_SDRAM_2+ACFG_SDRAM_MODE_REGISTER_VAL
strb r2, [r4]
/* set extended mode register */
ldr r4, =PHYS_SDRAM_2+ACFG_SDRAM_EXT_MODE_REGISTER_VAL
strb r2, [r4]
ldr r1, =ACFG_NORMAL_RW_CMD
str r1, [r0, #ESDCTL1_ROF]
.endm /* init_ddr */
.globl lowlevel_init
lowlevel_init:
init_aipi
init_clock
#ifdef CONFIG_SPL_BUILD
init_ddr
#endif
mov pc, lr