Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-16 00:03:24 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/board/cssi/cmpcpro/cmpcpro.c
Christophe Leroy 756af9ab83 board: cssi: Remove stale macro from cmpcpro.c 
Three unused macros were left over. Remove them.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
2023-05-04 10:58:07 +02:00

399 lines
11 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2006-2023 CS GROUP France
*/
#include <command.h>
#include <common.h>
#include <dm.h>
#include <env.h>
#include <env_internal.h>
#include <eeprom.h>
#include <fdt_support.h>
#include <hang.h>
#include <ioports.h>
#include <mpc83xx.h>
#include <netdev.h>
#include <spi.h>
#include <stdarg.h>
#include <stdlib.h>
#include <linux/delay.h>
#include <linux/immap_qe.h>
#include <linux/libfdt.h>
#include <linux/log2.h>
#include <linux/sizes.h>
#include <asm/io.h>
#include <asm/global_data.h>
#include <asm/mmu.h>
#include <u-boot/crc.h>
#include "../common/common.h"
DECLARE_GLOBAL_DATA_PTR;
#define ADDR_FPGA_BASE ((unsigned char __iomem *)CONFIG_CPLD_BASE)
#define ADDR_FPGA_RESET_G (ADDR_FPGA_BASE + 0x40)
#define ADDR_FPGA_REG_ETAT (ADDR_FPGA_BASE + 0x42)
#define R_ETAT_PRES_BASE 0x01
#define RESET_G_OK 0x08
/* SPI EEPROM parameters */
#define MAX_SPI_BYTES 0x28
#define EE_OFF_MAC1 0x10
#define EE_OFF_MAC2 0x16
#define EE_OFF_MAC3 0x1C
static uint upma_table[] = {
/* Read Single-Beat (RSS) */
0x00AC0C00, 0x00FC1C40, 0x30FCE045, 0xFFFF0C00,
0x00000000, 0x00000000, 0x00000000, 0x00000000,
/* Read Burst (RBS) */
0x00000000, 0x00000000, 0x00000000, 0x00000000,
0x00000000, 0x00000000, 0x00000000, 0x00000000,
0x00000000, 0x00000000, 0x00000000, 0x00000000,
0x00000000, 0x00000000, 0x00000000, 0x00000000,
/* Write Single-Beat (WSS) */
0x00A30C00, 0x00F31C40, 0x3FF3C045, 0xFFFF0C00,
0x00000000, 0x00000000, 0x00000000, 0x00000000,
/* Write Burst (WBS) */
0x00000000, 0x00000000, 0x00000000, 0x00000000,
0x00000000, 0x00000000, 0x00000000, 0x00000000,
0x00000000, 0x00000000, 0x00000000, 0x00000000,
0x00000000, 0x00000000, 0x00000000, 0x00000000,
/* Refresh Timer (RTS) */
0x00000000, 0x00000000, 0x00000000, 0x00000000,
0x00000000, 0x00000000, 0x00000000, 0x00000000,
0x00000000, 0x00000000, 0x00000000, 0x00000000,
/* Exception Condition (EXS) */
0xFFFF0C01, 0xFFFF0C01, 0xFFFF0C01, 0xFFFF0C01,
};
const qe_iop_conf_t qe_iop_conf_tab[] = {
/* ETH3 */
{1, 0, 1, 0, 1}, /* TxD0 */
{1, 1, 1, 0, 1}, /* TxD1 */
{1, 2, 1, 0, 1}, /* TxD2 */
{1, 3, 1, 0, 1}, /* TxD3 */
{1, 9, 1, 0, 1}, /* TxER */
{1, 12, 1, 0, 1}, /* TxEN */
{3, 24, 2, 0, 1}, /* TxCLK->CLK10 */
{1, 4, 2, 0, 1}, /* RxD0 */
{1, 5, 2, 0, 1}, /* RxD1 */
{1, 6, 2, 0, 1}, /* RxD2 */
{1, 7, 2, 0, 1}, /* RxD3 */
{1, 8, 2, 0, 1}, /* RxER */
{1, 10, 2, 0, 1}, /* RxDV */
{0, 13, 2, 0, 1}, /* RxCLK->CLK9 */
{1, 11, 2, 0, 1}, /* COL */
{1, 13, 2, 0, 1}, /* CRS */
/* ETH4 */
{1, 18, 1, 0, 1}, /* TxD0 */
{1, 19, 1, 0, 1}, /* TxD1 */
{1, 20, 1, 0, 1}, /* TxD2 */
{1, 21, 1, 0, 1}, /* TxD3 */
{1, 27, 1, 0, 1}, /* TxER */
{1, 30, 1, 0, 1}, /* TxEN */
{3, 6, 2, 0, 1}, /* TxCLK->CLK8 */
{1, 22, 2, 0, 1}, /* RxD0 */
{1, 23, 2, 0, 1}, /* RxD1 */
{1, 24, 2, 0, 1}, /* RxD2 */
{1, 25, 2, 0, 1}, /* RxD3 */
{1, 26, 1, 0, 1}, /* RxER */
{1, 28, 2, 0, 1}, /* Rx_DV */
{3, 31, 2, 0, 1}, /* RxCLK->CLK7 */
{1, 29, 2, 0, 1}, /* COL */
{1, 31, 2, 0, 1}, /* CRS */
{3, 4, 3, 0, 2}, /* MDIO */
{3, 5, 1, 0, 2}, /* MDC */
{0, 0, 0, 0, QE_IOP_TAB_END}, /* END of table */
};
void iop_setup_miae(void)
{
immap_t __iomem *im = (immap_t *)CONFIG_SYS_IMMR;
/* PORTA configuration */
out_be32(&im->qepio.ioport[0].pdat, 0x00808000);
out_be32(&im->qepio.ioport[0].podr, 0x00008000);
out_be32(&im->qepio.ioport[0].dir1, 0x40800968);
out_be32(&im->qepio.ioport[0].dir2, 0x650A0896);
out_be32(&im->qepio.ioport[0].ppar1, 0x40400204);
out_be32(&im->qepio.ioport[0].ppar2, 0x05050464);
/* PORTB configuration */
out_be32(&im->qepio.ioport[1].pdat, 0x00018000);
out_be32(&im->qepio.ioport[1].podr, 0x00000000);
out_be32(&im->qepio.ioport[1].dir1, 0x50A08949);
out_be32(&im->qepio.ioport[1].dir2, 0x5C0C6890);
out_be32(&im->qepio.ioport[1].ppar1, 0x50504644);
out_be32(&im->qepio.ioport[1].ppar2, 0x080800A0);
/* PORTC configuration */
out_be32(&im->qepio.ioport[2].pdat, 0x3D000108);
out_be32(&im->qepio.ioport[2].podr, 0x00000000);
out_be32(&im->qepio.ioport[2].dir1, 0x45518000);
out_be32(&im->qepio.ioport[2].dir2, 0xA8119561);
out_be32(&im->qepio.ioport[2].ppar1, 0x80008000);
out_be32(&im->qepio.ioport[2].ppar2, 0x00000000);
/* PORTD configuration */
out_be32(&im->qepio.ioport[3].pdat, 0x1000E000);
out_be32(&im->qepio.ioport[3].podr, 0x0000E000);
out_be32(&im->qepio.ioport[3].dir1, 0xFDD20800);
out_be32(&im->qepio.ioport[3].dir2, 0x54155228);
out_be32(&im->qepio.ioport[3].ppar1, 0x54A30C00);
out_be32(&im->qepio.ioport[3].ppar2, 0x00000100);
}
void iop_setup_mcr(void)
{
immap_t __iomem *im = (immap_t *)CONFIG_SYS_IMMR;
/* PORTA configuration */
out_be32(&im->qepio.ioport[0].pdat, 0x00808004);
out_be32(&im->qepio.ioport[0].podr, 0x00000000);
out_be32(&im->qepio.ioport[0].dir1, 0x40800A68);
out_be32(&im->qepio.ioport[0].dir2, 0x650A0896);
out_be32(&im->qepio.ioport[0].ppar1, 0x40400004);
out_be32(&im->qepio.ioport[0].ppar2, 0x05050444);
/* PORTB configuration */
out_be32(&im->qepio.ioport[1].pdat, 0x00008000);
out_be32(&im->qepio.ioport[1].podr, 0x00000004);
out_be32(&im->qepio.ioport[1].dir1, 0x50A08A4A);
out_be32(&im->qepio.ioport[1].dir2, 0x5C0C6890);
out_be32(&im->qepio.ioport[1].ppar1, 0x50504444);
out_be32(&im->qepio.ioport[1].ppar2, 0x08080080);
/* PORTC configuration */
out_be32(&im->qepio.ioport[2].pdat, 0x3D000018);
out_be32(&im->qepio.ioport[2].podr, 0x00000400);
out_be32(&im->qepio.ioport[2].dir1, 0x45518000);
out_be32(&im->qepio.ioport[2].dir2, 0xA8129561);
out_be32(&im->qepio.ioport[2].ppar1, 0x80008000);
out_be32(&im->qepio.ioport[2].ppar2, 0x00000000);
/* PORTD configuration */
out_be32(&im->qepio.ioport[3].pdat, 0x1000E000);
out_be32(&im->qepio.ioport[3].podr, 0x0000E000);
out_be32(&im->qepio.ioport[3].dir1, 0xFDD20800);
out_be32(&im->qepio.ioport[3].dir2, 0x54155228);
out_be32(&im->qepio.ioport[3].ppar1, 0x54A30C00);
out_be32(&im->qepio.ioport[3].ppar2, 0x00000100);
}
static void iop_setup_cmpcpro(void)
{
immap_t __iomem *im = (immap_t *)CONFIG_SYS_IMMR;
/* PORTA configuration */
out_be32(&im->qepio.ioport[0].pdat, 0x00000000);
out_be32(&im->qepio.ioport[0].podr, 0x00000000);
out_be32(&im->qepio.ioport[0].dir1, 0x50A84020);
out_be32(&im->qepio.ioport[0].dir2, 0x00000000);
out_be32(&im->qepio.ioport[0].ppar1, 0xF0FCC000);
out_be32(&im->qepio.ioport[0].ppar2, 0x00000000);
/* PORTB configuration */
out_be32(&im->qepio.ioport[1].pdat, 0x00000000);
out_be32(&im->qepio.ioport[1].podr, 0x00000000);
out_be32(&im->qepio.ioport[1].dir1, 0x00000000);
out_be32(&im->qepio.ioport[1].dir2, 0x00006800);
out_be32(&im->qepio.ioport[1].ppar1, 0x00000000);
out_be32(&im->qepio.ioport[1].ppar2, 0x00000000);
/* PORTC configuration */
out_be32(&im->qepio.ioport[2].pdat, 0x19000000);
out_be32(&im->qepio.ioport[2].podr, 0x00000000);
out_be32(&im->qepio.ioport[2].dir1, 0x01410000);
out_be32(&im->qepio.ioport[2].dir2, 0xA8009400);
out_be32(&im->qepio.ioport[2].ppar1, 0x00000000);
out_be32(&im->qepio.ioport[2].ppar2, 0x00000000);
/* PORTD configuration */
out_be32(&im->qepio.ioport[3].pdat, 0x1000E000);
out_be32(&im->qepio.ioport[3].podr, 0x0000E000);
out_be32(&im->qepio.ioport[3].dir1, 0xFD020000);
out_be32(&im->qepio.ioport[3].dir2, 0x54055000);
out_be32(&im->qepio.ioport[3].ppar1, 0x54030000);
out_be32(&im->qepio.ioport[3].ppar2, 0x00000000);
}
int board_early_init_r(void)
{
immap_t __iomem *im = (immap_t *)CONFIG_SYS_IMMR;
fsl_lbc_t *lbus = &im->im_lbc;
upmconfig(UPMA, upma_table, ARRAY_SIZE(upma_table));
out_be32(&lbus->mamr, 0x00044440);
/* configure LBCR register */
out_be32(&lbus->lbcr, 0x00000500);
sync();
if (in_8(ADDR_FPGA_REG_ETAT) & R_ETAT_PRES_BASE) {
int i;
/* Initialize signal PROG_FPGA_FIRMWARE */
setbits_be32(&im->qepio.ioport[0].pdat, 0x00008000);
setbits_be32(&im->qepio.ioport[0].dir2, 0x60000002);
setbits_be32(&im->qepio.ioport[0].podr, 0x00008000);
mdelay(1);
/* Now read CPDATA[31] to check if FPGA is loaded */
if (!in_be32(&im->qepio.ioport[0].pdat) & 0x00000001) {
printf("Reloading FPGA firmware.\n");
clrbits_be32(&im->qepio.ioport[0].pdat, 0x00008000);
udelay(1);
setbits_be32(&im->qepio.ioport[0].pdat, 0x00008000);
/* Wait 200 msec and check DONE_FPGA_FIRMWARE */
mdelay(200);
if (!(in_be32(&im->qepio.ioport[0].pdat) & 0x00000001)) {
for (;;) {
printf("error loading firmware.\n");
mdelay(500);
}
}
/* Send a reset signal and wait for 20 msec */
out_8(ADDR_FPGA_RESET_G, in_8(ADDR_FPGA_RESET_G) | RESET_G_OK);
mdelay(20);
out_8(ADDR_FPGA_RESET_G, in_8(ADDR_FPGA_RESET_G) & ~RESET_G_OK);
}
/* Wait 300 msec and check the reset state */
mdelay(300);
for (i = 0; !(in_8(ADDR_FPGA_REG_ETAT) & RESET_G_OK); i++) {
for (;;) {
printf("Could not reset FPGA.\n");
mdelay(500);
}
}
iop_setup_common();
/* clocks configuration */
out_be32(&qe_immr->qmx.cmxsi1cr_l, 0x00040004);
out_be32(&qe_immr->qmx.cmxsi1syr, 0x00000000);
} else {
iop_setup_cmpcpro();
}
return 0;
}
int dram_init(int board_type)
{
immap_t __iomem *im = (immap_t __iomem *)CONFIG_SYS_IMMR;
out_be32(&im->sysconf.ddrlaw[0].bar, CFG_SYS_DDR_SDRAM_BASE & LAWBAR_BAR);
out_be32(&im->sysconf.ddrlaw[0].ar, LAWAR_EN | ((ilog2(SZ_512M) - 1) & LAWAR_SIZE));
out_be32(&im->ddr.sdram_clk_cntl, CFG_SYS_DDR_CLK_CNTL);
out_be32(&im->ddr.csbnds[0].csbnds, CFG_SYS_DDR_CS0_BNDS);
out_be32(&im->ddr.cs_config[0], CFG_SYS_DDR_CS0_CONFIG);
out_be32(&im->ddr.timing_cfg_0, CFG_SYS_DDR_TIMING_0);
out_be32(&im->ddr.timing_cfg_1, CFG_SYS_DDR_TIMING_1);
out_be32(&im->ddr.timing_cfg_2, CFG_SYS_DDR_TIMING_2);
out_be32(&im->ddr.timing_cfg_3, CFG_SYS_DDR_TIMING_3);
out_be32(&im->ddr.sdram_cfg, CFG_SYS_DDR_SDRAM_CFG);
out_be32(&im->ddr.sdram_cfg2, CFG_SYS_DDR_SDRAM_CFG2);
out_be32(&im->ddr.sdram_mode, CFG_SYS_DDR_MODE);
out_be32(&im->ddr.sdram_mode2, CFG_SYS_DDR_MODE2);
out_be32(&im->ddr.sdram_interval, CFG_SYS_DDR_INTERVAL);
udelay(200);
setbits_be32(&im->ddr.sdram_cfg, SDRAM_CFG_MEM_EN);
gd->ram_size = SZ_512M;
return 0;
}
int checkboard(void)
{
printf("Board: ");
/* Is a motherboard present ? */
if (in_8(ADDR_FPGA_REG_ETAT) & R_ETAT_PRES_BASE)
return checkboard_common();
printf("CMPCPRO (CS GROUP)\n");
return 0;
}
/* Reads MAC addresses from SPI EEPROM */
static int setup_mac(void)
{
uchar din[MAX_SPI_BYTES];
int ret;
unsigned long ident = 0x08005120;
ret = read_eeprom(din, sizeof(din));
if (ret)
return ret;
if (memcmp(din + EE_OFF_MAC1, &ident, sizeof(ident)) == 0) {
eth_env_set_enetaddr("ethaddr", din + EE_OFF_MAC1);
eth_env_set_enetaddr("eth3addr", din + EE_OFF_MAC1);
}
if (memcmp(din + EE_OFF_MAC2, &ident, sizeof(ident)) == 0)
eth_env_set_enetaddr("eth1addr", din + EE_OFF_MAC2);
if (memcmp(din + EE_OFF_MAC3, &ident, sizeof(ident)) == 0)
eth_env_set_enetaddr("eth2addr", din + EE_OFF_MAC3);
return 0;
}
int misc_init_r(void)
{
/* we do not modify environment variable area if CRC is false */
/* Verify if mother board is present */
if (in_8(ADDR_FPGA_REG_ETAT) & R_ETAT_PRES_BASE) {
misc_init_r_common();
} else {
env_set("config", CFG_BOARD_CMPCXXX);
env_set("hostname", CFG_BOARD_CMPCXXX);
}
if (setup_mac())
printf("Error retrieving mac addresses\n");
return 0;
}
int ft_board_setup(void *blob, struct bd_info *bd)
{
ft_cpu_setup(blob, bd);
/* MIAE only */
if (!(in_8(ADDR_FPGA_REG_ETAT) & R_ETAT_PRES_BASE))
return 0;
return ft_board_setup_common(blob);
}
void ft_board_setup_phy3(void)
{
/* switch to phy3 with gpio, we'll only use phy3 */
immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
setbits_be32(&immr->qepio.ioport[2].pdat, 0x00000400);
}
Reference in a new issue View git blame Copy permalink