Jeffrey Mann ada4697d02 [PATCH] Run new sequoia boards with an EBC speed of 83MHz ... Because the Sequoia board does not boot with an EBC faster than 66MHz, the clock divider are changed after the initial boot process. This allows for maximum clocking speeds to be achieved on newer boards. Sequoia boards with 666.66 MHz processors require that the EBC divider be set to 3 in order to start the initial boot process at a slower EBC speed. After the initial boot process, the divider can be set back to 2, which will cause the boards to run at 83.333MHz. This is backward compatible with boards with 533.33 MHz processors, as these boards will already be set with an EBC divider of 2. Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>		2007-05-16 13:23:10 +02:00
..
config.mk	Fix sequoia separate object direcory building problems.	2006-10-23 22:17:05 +02:00
init.S	[PATCH] Add DDR2 optimization code for Sequoia (440EPx) board	2007-01-05 10:38:05 +01:00
Makefile	Fix sequoia separate object direcory building problems.	2006-10-23 22:17:05 +02:00
sdram.c	ppc4xx: Sequoia: Remove cpu/ppc4xx/speed.c from NAND booting	2007-05-05 08:29:01 +02:00
sdram.h	Merge with /home/hs/SC3/u-boot	2007-01-15 13:41:04 +01:00
sequoia.c	[PATCH] Run new sequoia boards with an EBC speed of 83MHz	2007-05-16 13:23:10 +02:00
sequoia.h	Add support for AMCC Sequoia PPC440EPx eval board	2006-09-07 11:51:23 +02:00
u-boot-nand.lds	Add NAND environment support for PPC440EPx Sequoia NAND boot config	2006-09-12 20:19:10 +02:00
u-boot.lds	Add support for AMCC Sequoia PPC440EPx eval board	2006-09-07 11:51:23 +02:00