mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 13:56:30 +00:00
1a4596601f
Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
198 lines
4.6 KiB
C
198 lines
4.6 KiB
C
/*
|
|
* (C) Copyright 2004-2009
|
|
* Texas Instruments Incorporated, <www.ti.com>
|
|
* Richard Woodruff <r-woodruff2@ti.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
#include <common.h>
|
|
#include <netdev.h>
|
|
#include <twl4030.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/mmc_host_def.h>
|
|
#include <asm/arch/mux.h>
|
|
#include <asm/arch/mem.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/mach-types.h>
|
|
#include "sdp.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
const omap3_sysinfo sysinfo = {
|
|
DDR_DISCRETE,
|
|
"OMAP3 SDP3430 board",
|
|
#if defined(CONFIG_ENV_IS_IN_ONENAND)
|
|
"OneNAND",
|
|
#elif defined(CONFIG_ENV_IS_IN_NAND)
|
|
"NAND",
|
|
#else
|
|
"NOR",
|
|
#endif
|
|
};
|
|
|
|
/* Timing definitions for GPMC controller for Sibley NOR */
|
|
static const u32 gpmc_sdp_nor[] = {
|
|
SDP3430_NOR_GPMC_CONF1,
|
|
SDP3430_NOR_GPMC_CONF2,
|
|
SDP3430_NOR_GPMC_CONF3,
|
|
SDP3430_NOR_GPMC_CONF4,
|
|
SDP3430_NOR_GPMC_CONF5,
|
|
SDP3430_NOR_GPMC_CONF6,
|
|
/*CONF7- computed as params */
|
|
};
|
|
|
|
/*
|
|
* Timing definitions for GPMC controller for Debug Board
|
|
* Debug board contains access to ethernet and DIP Switch setting
|
|
* information etc.
|
|
*/
|
|
static const u32 gpmc_sdp_debug[] = {
|
|
SDP3430_DEBUG_GPMC_CONF1,
|
|
SDP3430_DEBUG_GPMC_CONF2,
|
|
SDP3430_DEBUG_GPMC_CONF3,
|
|
SDP3430_DEBUG_GPMC_CONF4,
|
|
SDP3430_DEBUG_GPMC_CONF5,
|
|
SDP3430_DEBUG_GPMC_CONF6,
|
|
/*CONF7- computed as params */
|
|
};
|
|
|
|
/* Timing defintions for GPMC OneNAND */
|
|
static const u32 gpmc_sdp_onenand[] = {
|
|
SDP3430_ONENAND_GPMC_CONF1,
|
|
SDP3430_ONENAND_GPMC_CONF2,
|
|
SDP3430_ONENAND_GPMC_CONF3,
|
|
SDP3430_ONENAND_GPMC_CONF4,
|
|
SDP3430_ONENAND_GPMC_CONF5,
|
|
SDP3430_ONENAND_GPMC_CONF6,
|
|
/*CONF7- computed as params */
|
|
};
|
|
|
|
/* GPMC definitions for GPMC NAND */
|
|
static const u32 gpmc_sdp_nand[] = {
|
|
SDP3430_NAND_GPMC_CONF1,
|
|
SDP3430_NAND_GPMC_CONF2,
|
|
SDP3430_NAND_GPMC_CONF3,
|
|
SDP3430_NAND_GPMC_CONF4,
|
|
SDP3430_NAND_GPMC_CONF5,
|
|
SDP3430_NAND_GPMC_CONF6,
|
|
/*CONF7- computed as params */
|
|
};
|
|
|
|
/* gpmc_cfg is initialized by gpmc_init and we use it here */
|
|
extern struct gpmc *gpmc_cfg;
|
|
|
|
/**
|
|
* @brief board_init - gpmc and basic setup as phase1 of boot sequence
|
|
*
|
|
* @return 0
|
|
*/
|
|
int board_init(void)
|
|
{
|
|
gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
|
|
/* TODO: Dynamically pop out CS mapping and program accordingly */
|
|
/* Configure devices for default ON ON ON settings */
|
|
enable_gpmc_cs_config(gpmc_sdp_nor, &gpmc_cfg->cs[0],
|
|
CONFIG_SYS_FLASH_BASE, GPMC_SIZE_128M);
|
|
enable_gpmc_cs_config(gpmc_sdp_nand, &gpmc_cfg->cs[1], 0x28000000,
|
|
GPMC_SIZE_16M);
|
|
enable_gpmc_cs_config(gpmc_sdp_onenand, &gpmc_cfg->cs[2], 0x20000000,
|
|
GPMC_SIZE_16M);
|
|
enable_gpmc_cs_config(gpmc_sdp_debug, &gpmc_cfg->cs[3], DEBUG_BASE,
|
|
GPMC_SIZE_16M);
|
|
/* board id for Linux */
|
|
gd->bd->bi_arch_number = MACH_TYPE_OMAP_3430SDP;
|
|
/* boot param addr */
|
|
gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define LAN_RESET_REGISTER (CONFIG_LAN91C96_BASE + 0x01c)
|
|
#define ETH_CONTROL_REG (CONFIG_LAN91C96_BASE + 0x30b)
|
|
|
|
/**
|
|
* @brief board_eth_init Take the Ethernet controller out of reset and wait
|
|
* for the EEPROM load to complete.
|
|
*/
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
int rc = 0;
|
|
#ifdef CONFIG_LAN91C96
|
|
int cnt = 20;
|
|
|
|
writew(0x0, LAN_RESET_REGISTER);
|
|
do {
|
|
writew(0x1, LAN_RESET_REGISTER);
|
|
udelay(100);
|
|
if (cnt == 0)
|
|
goto reset_err_out;
|
|
--cnt;
|
|
} while (readw(LAN_RESET_REGISTER) != 0x1);
|
|
|
|
cnt = 20;
|
|
|
|
do {
|
|
writew(0x0, LAN_RESET_REGISTER);
|
|
udelay(100);
|
|
if (cnt == 0)
|
|
goto reset_err_out;
|
|
--cnt;
|
|
} while (readw(LAN_RESET_REGISTER) != 0x0000);
|
|
udelay(1000);
|
|
|
|
writeb(readb(ETH_CONTROL_REG) & ~0x1, ETH_CONTROL_REG);
|
|
udelay(1000);
|
|
rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE);
|
|
reset_err_out:
|
|
|
|
#endif
|
|
return rc;
|
|
}
|
|
|
|
/**
|
|
* @brief misc_init_r - Configure SDP board specific configurations
|
|
* such as power configurations, ethernet initialization as phase2 of
|
|
* boot sequence
|
|
*
|
|
* @return 0
|
|
*/
|
|
int misc_init_r(void)
|
|
{
|
|
/* Partial setup:
|
|
* VAUX3 - 2.8V for DVI
|
|
* VPLL1 - 1.8V
|
|
* VDAC - 1.8V
|
|
* and turns on LEDA/LEDB (not needed ... NOP?)
|
|
*/
|
|
twl4030_power_init();
|
|
|
|
/* FIXME finish setup:
|
|
* VAUX1 - 2.8V for mainboard I/O
|
|
* VAUX2 - 2.8V for camera
|
|
* VAUX4 - 1.8V for OMAP3 CSI
|
|
* VMMC1 - 3.15V (init, variable) for MMC1
|
|
* VMMC2 - 1.85V for MMC2
|
|
* VSIM - off (init, variable) for MMC1.DAT[3..7], SIM
|
|
* VPLL2 - 1.8V
|
|
*/
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* @brief set_muxconf_regs Setting up the configuration Mux registers
|
|
* specific to the hardware. Many pins need to be moved from protect
|
|
* to primary mode.
|
|
*/
|
|
void set_muxconf_regs(void)
|
|
{
|
|
/* platform specific muxes */
|
|
MUX_SDP3430();
|
|
}
|
|
|
|
#ifdef CONFIG_GENERIC_MMC
|
|
int board_mmc_init(bd_t *bis)
|
|
{
|
|
return omap_mmc_init(0, 0, 0, -1, -1);
|
|
}
|
|
#endif
|