u-boot/common/spl/spl_spi.c
Philipp Tomsich 2bac55bc16 spl: spi: override CONFIG_SYS_SPI_U_BOOT_OFFS via /config-property
For the RK3399-Q7, we need some flexibility (depending on the feature
set we include in the SPL stage and how large our SPI flash is) in
positioning the SPL payload (i.e. the FIT image containing U-Boot, ATF
and the M0 payload) in our SPI flash.

To avoid having to deal with this through different U-Boot images, we
introduce a the '/config/u-boot,spl-payload-offset' property node
allow it to override the default setting.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: Simon Glass <sjg@chromium.org>
2017-05-11 22:03:39 -04:00

140 lines
3.4 KiB
C

/*
* Copyright (C) 2011 OMICRON electronics GmbH
*
* based on drivers/mtd/nand/nand_spl_load.c
*
* Copyright (C) 2011
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <spi.h>
#include <spi_flash.h>
#include <errno.h>
#include <spl.h>
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_SPL_OS_BOOT
/*
* Load the kernel, check for a valid header we can parse, and if found load
* the kernel and then device tree.
*/
static int spi_load_image_os(struct spl_image_info *spl_image,
struct spi_flash *flash,
struct image_header *header)
{
int err;
/* Read for a header, parse or error out. */
spi_flash_read(flash, CONFIG_SYS_SPI_KERNEL_OFFS, 0x40,
(void *)header);
if (image_get_magic(header) != IH_MAGIC)
return -1;
err = spl_parse_image_header(spl_image, header);
if (err)
return err;
spi_flash_read(flash, CONFIG_SYS_SPI_KERNEL_OFFS,
spl_image->size, (void *)spl_image->load_addr);
/* Read device tree. */
spi_flash_read(flash, CONFIG_SYS_SPI_ARGS_OFFS,
CONFIG_SYS_SPI_ARGS_SIZE,
(void *)CONFIG_SYS_SPL_ARGS_ADDR);
return 0;
}
#endif
static ulong spl_spi_fit_read(struct spl_load_info *load, ulong sector,
ulong count, void *buf)
{
struct spi_flash *flash = load->dev;
ulong ret;
ret = spi_flash_read(flash, sector, count, buf);
if (!ret)
return count;
else
return 0;
}
/*
* The main entry for SPI booting. It's necessary that SDRAM is already
* configured and available since this code loads the main U-Boot image
* from SPI into SDRAM and starts it from there.
*/
static int spl_spi_load_image(struct spl_image_info *spl_image,
struct spl_boot_device *bootdev)
{
int err = 0;
unsigned payload_offs = CONFIG_SYS_SPI_U_BOOT_OFFS;
struct spi_flash *flash;
struct image_header *header;
/*
* Load U-Boot image from SPI flash into RAM
*/
flash = spi_flash_probe(CONFIG_SF_DEFAULT_BUS,
CONFIG_SF_DEFAULT_CS,
CONFIG_SF_DEFAULT_SPEED,
CONFIG_SF_DEFAULT_MODE);
if (!flash) {
puts("SPI probe failed.\n");
return -ENODEV;
}
/* use CONFIG_SYS_TEXT_BASE as temporary storage area */
header = (struct image_header *)(CONFIG_SYS_TEXT_BASE);
#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
payload_offs = fdtdec_get_config_int(gd->fdt_blob,
"u-boot,spl-payload-offset",
payload_offs);
#endif
#ifdef CONFIG_SPL_OS_BOOT
if (spl_start_uboot() || spi_load_image_os(spl_image, flash, header))
#endif
{
/* Load u-boot, mkimage header is 64 bytes. */
err = spi_flash_read(flash, payload_offs, 0x40,
(void *)header);
if (err) {
debug("%s: Failed to read from SPI flash (err=%d)\n",
__func__, err);
return err;
}
if (IS_ENABLED(CONFIG_SPL_LOAD_FIT) &&
image_get_magic(header) == FDT_MAGIC) {
struct spl_load_info load;
debug("Found FIT\n");
load.dev = flash;
load.priv = NULL;
load.filename = NULL;
load.bl_len = 1;
load.read = spl_spi_fit_read;
err = spl_load_simple_fit(spl_image, &load,
payload_offs,
header);
} else {
err = spl_parse_image_header(spl_image, header);
if (err)
return err;
err = spi_flash_read(flash, payload_offs,
spl_image->size,
(void *)spl_image->load_addr);
}
}
return err;
}
/* Use priorty 1 so that boards can override this */
SPL_LOAD_IMAGE_METHOD("SPI", 1, BOOT_DEVICE_SPI, spl_spi_load_image);