u-boot/board/xilinx/zynq/zynq-zybo/ps7_init_gpl.h
Michal Simek ad5b580126 ARM: zynq: Simplify zynq configuration
Extending Kconfig for adding new platform is a lot of work
for nothing. Setting SYS_CONFIG_NAME directly in Kconfig and
remove all dependencies on TARGET_ZYNQ_* options including SPL.
As a side-effect it also remove custom init folder for ps7_init_gpl.*
files. Folder is chosen based on device-tree file.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-05-24 13:22:50 +02:00

98 lines
3.1 KiB
C

/*
* Copyright (c) Xilinx, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifdef __cplusplus
extern "C" {
#endif
/*typedef unsigned int u32; */
/** do we need to make this name more unique ? **/
/*extern u32 ps7_init_data[]; */
extern unsigned long *ps7_ddr_init_data;
extern unsigned long *ps7_mio_init_data;
extern unsigned long *ps7_pll_init_data;
extern unsigned long *ps7_clock_init_data;
extern unsigned long *ps7_peripherals_init_data;
#define OPCODE_EXIT 0U
#define OPCODE_CLEAR 1U
#define OPCODE_WRITE 2U
#define OPCODE_MASKWRITE 3U
#define OPCODE_MASKPOLL 4U
#define OPCODE_MASKDELAY 5U
#define NEW_PS7_ERR_CODE 1
/* Encode number of arguments in last nibble */
#define EMIT_EXIT() ((OPCODE_EXIT << 4) | 0)
#define EMIT_CLEAR(addr) ((OPCODE_CLEAR << 4) | 1) , addr
#define EMIT_WRITE(addr, val) ((OPCODE_WRITE << 4) | 2) , addr, val
#define EMIT_MASKWRITE(addr, mask, val) ((OPCODE_MASKWRITE << 4) | 3) , addr, mask, val
#define EMIT_MASKPOLL(addr, mask) ((OPCODE_MASKPOLL << 4) | 2) , addr, mask
#define EMIT_MASKDELAY(addr, mask) ((OPCODE_MASKDELAY << 4) | 2) , addr, mask
/* Returns codes of PS7_Init */
#define PS7_INIT_SUCCESS (0) /* 0 is success in good old C */
#define PS7_INIT_CORRUPT (1) /* 1 the data is corrupted, and slcr reg are in corrupted state now */
#define PS7_INIT_TIMEOUT (2) /* 2 when a poll operation timed out */
#define PS7_POLL_FAILED_DDR_INIT (3) /* 3 when a poll operation timed out for ddr init */
#define PS7_POLL_FAILED_DMA (4) /* 4 when a poll operation timed out for dma done bit */
#define PS7_POLL_FAILED_PLL (5) /* 5 when a poll operation timed out for pll sequence init */
/* Silicon Versions */
#define PCW_SILICON_VERSION_1 0
#define PCW_SILICON_VERSION_2 1
#define PCW_SILICON_VERSION_3 2
/* This flag to be used by FSBL to check whether ps7_post_config() proc exixts */
#define PS7_POST_CONFIG
/* Freq of all peripherals */
#define APU_FREQ 650000000
#define DDR_FREQ 525000000
#define DCI_FREQ 10096154
#define QSPI_FREQ 200000000
#define SMC_FREQ 10000000
#define ENET0_FREQ 125000000
#define ENET1_FREQ 10000000
#define USB0_FREQ 60000000
#define USB1_FREQ 60000000
#define SDIO_FREQ 50000000
#define UART_FREQ 100000000
#define SPI_FREQ 10000000
#define I2C_FREQ 108333336
#define WDT_FREQ 108333336
#define TTC_FREQ 50000000
#define CAN_FREQ 10000000
#define PCAP_FREQ 200000000
#define TPIU_FREQ 200000000
#define FPGA0_FREQ 100000000
#define FPGA1_FREQ 142857132
#define FPGA2_FREQ 200000000
#define FPGA3_FREQ 50000000
/* For delay calculation using global registers*/
#define SCU_GLOBAL_TIMER_COUNT_L32 0xF8F00200
#define SCU_GLOBAL_TIMER_COUNT_U32 0xF8F00204
#define SCU_GLOBAL_TIMER_CONTROL 0xF8F00208
#define SCU_GLOBAL_TIMER_AUTO_INC 0xF8F00218
int ps7_config(unsigned long *);
int ps7_init(void);
int ps7_post_config(void);
int ps7_debug(void);
char *getPS7MessageInfo(unsigned key);
void perf_start_clock(void);
void perf_disable_clock(void);
void perf_reset_clock(void);
void perf_reset_and_start_timer(void);
int get_number_of_cycles_for_delay(unsigned int delay);
#ifdef __cplusplus
}
#endif