mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 08:57:58 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
1170 lines
27 KiB
C
1170 lines
27 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Ethernet driver for TI K2HK EVM.
|
|
*
|
|
* (C) Copyright 2012-2014
|
|
* Texas Instruments Incorporated, <www.ti.com>
|
|
*/
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <console.h>
|
|
|
|
#include <dm.h>
|
|
#include <dm/lists.h>
|
|
|
|
#include <net.h>
|
|
#include <phy.h>
|
|
#include <errno.h>
|
|
#include <miiphy.h>
|
|
#include <malloc.h>
|
|
#include <asm/ti-common/keystone_nav.h>
|
|
#include <asm/ti-common/keystone_net.h>
|
|
#include <asm/ti-common/keystone_serdes.h>
|
|
#include <asm/arch/psc_defs.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#ifndef CONFIG_DM_ETH
|
|
unsigned int emac_open;
|
|
static struct mii_dev *mdio_bus;
|
|
static unsigned int sys_has_mdio = 1;
|
|
#endif
|
|
|
|
#ifdef KEYSTONE2_EMAC_GIG_ENABLE
|
|
#define emac_gigabit_enable(x) keystone2_eth_gigabit_enable(x)
|
|
#else
|
|
#define emac_gigabit_enable(x) /* no gigabit to enable */
|
|
#endif
|
|
|
|
#define RX_BUFF_NUMS 24
|
|
#define RX_BUFF_LEN 1520
|
|
#define MAX_SIZE_STREAM_BUFFER RX_BUFF_LEN
|
|
#define SGMII_ANEG_TIMEOUT 4000
|
|
|
|
static u8 rx_buffs[RX_BUFF_NUMS * RX_BUFF_LEN] __aligned(16);
|
|
|
|
#ifndef CONFIG_DM_ETH
|
|
struct rx_buff_desc net_rx_buffs = {
|
|
.buff_ptr = rx_buffs,
|
|
.num_buffs = RX_BUFF_NUMS,
|
|
.buff_len = RX_BUFF_LEN,
|
|
.rx_flow = 22,
|
|
};
|
|
#endif
|
|
|
|
#ifdef CONFIG_DM_ETH
|
|
|
|
enum link_type {
|
|
LINK_TYPE_SGMII_MAC_TO_MAC_AUTO = 0,
|
|
LINK_TYPE_SGMII_MAC_TO_PHY_MODE = 1,
|
|
LINK_TYPE_SGMII_MAC_TO_MAC_FORCED_MODE = 2,
|
|
LINK_TYPE_SGMII_MAC_TO_FIBRE_MODE = 3,
|
|
LINK_TYPE_SGMII_MAC_TO_PHY_NO_MDIO_MODE = 4,
|
|
LINK_TYPE_RGMII_LINK_MAC_PHY = 5,
|
|
LINK_TYPE_RGMII_LINK_MAC_MAC_FORCED = 6,
|
|
LINK_TYPE_RGMII_LINK_MAC_PHY_NO_MDIO = 7,
|
|
LINK_TYPE_10G_MAC_TO_PHY_MODE = 10,
|
|
LINK_TYPE_10G_MAC_TO_MAC_FORCED_MODE = 11,
|
|
};
|
|
|
|
#define mac_hi(mac) (((mac)[0] << 0) | ((mac)[1] << 8) | \
|
|
((mac)[2] << 16) | ((mac)[3] << 24))
|
|
#define mac_lo(mac) (((mac)[4] << 0) | ((mac)[5] << 8))
|
|
|
|
#ifdef CONFIG_KSNET_NETCP_V1_0
|
|
|
|
#define EMAC_EMACSW_BASE_OFS 0x90800
|
|
#define EMAC_EMACSW_PORT_BASE_OFS (EMAC_EMACSW_BASE_OFS + 0x60)
|
|
|
|
/* CPSW Switch slave registers */
|
|
#define CPGMACSL_REG_SA_LO 0x10
|
|
#define CPGMACSL_REG_SA_HI 0x14
|
|
|
|
#define DEVICE_EMACSW_BASE(base, x) ((base) + EMAC_EMACSW_PORT_BASE_OFS + \
|
|
(x) * 0x30)
|
|
|
|
#elif defined CONFIG_KSNET_NETCP_V1_5
|
|
|
|
#define EMAC_EMACSW_PORT_BASE_OFS 0x222000
|
|
|
|
/* CPSW Switch slave registers */
|
|
#define CPGMACSL_REG_SA_LO 0x308
|
|
#define CPGMACSL_REG_SA_HI 0x30c
|
|
|
|
#define DEVICE_EMACSW_BASE(base, x) ((base) + EMAC_EMACSW_PORT_BASE_OFS + \
|
|
(x) * 0x1000)
|
|
|
|
#endif
|
|
|
|
|
|
struct ks2_eth_priv {
|
|
struct udevice *dev;
|
|
struct phy_device *phydev;
|
|
struct mii_dev *mdio_bus;
|
|
int phy_addr;
|
|
phy_interface_t phy_if;
|
|
int sgmii_link_type;
|
|
void *mdio_base;
|
|
struct rx_buff_desc net_rx_buffs;
|
|
struct pktdma_cfg *netcp_pktdma;
|
|
void *hd;
|
|
int slave_port;
|
|
enum link_type link_type;
|
|
bool emac_open;
|
|
bool has_mdio;
|
|
};
|
|
#endif
|
|
|
|
/* MDIO */
|
|
|
|
static int keystone2_mdio_reset(struct mii_dev *bus)
|
|
{
|
|
u_int32_t clkdiv;
|
|
struct mdio_regs *adap_mdio = bus->priv;
|
|
|
|
clkdiv = (EMAC_MDIO_BUS_FREQ / EMAC_MDIO_CLOCK_FREQ) - 1;
|
|
|
|
writel((clkdiv & 0xffff) | MDIO_CONTROL_ENABLE |
|
|
MDIO_CONTROL_FAULT | MDIO_CONTROL_FAULT_ENABLE,
|
|
&adap_mdio->control);
|
|
|
|
while (readl(&adap_mdio->control) & MDIO_CONTROL_IDLE)
|
|
;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* keystone2_mdio_read - read a PHY register via MDIO interface.
|
|
* Blocks until operation is complete.
|
|
*/
|
|
static int keystone2_mdio_read(struct mii_dev *bus,
|
|
int addr, int devad, int reg)
|
|
{
|
|
int tmp;
|
|
struct mdio_regs *adap_mdio = bus->priv;
|
|
|
|
while (readl(&adap_mdio->useraccess0) & MDIO_USERACCESS0_GO)
|
|
;
|
|
|
|
writel(MDIO_USERACCESS0_GO | MDIO_USERACCESS0_WRITE_READ |
|
|
((reg & 0x1f) << 21) | ((addr & 0x1f) << 16),
|
|
&adap_mdio->useraccess0);
|
|
|
|
/* Wait for command to complete */
|
|
while ((tmp = readl(&adap_mdio->useraccess0)) & MDIO_USERACCESS0_GO)
|
|
;
|
|
|
|
if (tmp & MDIO_USERACCESS0_ACK)
|
|
return tmp & 0xffff;
|
|
|
|
return -1;
|
|
}
|
|
|
|
/**
|
|
* keystone2_mdio_write - write to a PHY register via MDIO interface.
|
|
* Blocks until operation is complete.
|
|
*/
|
|
static int keystone2_mdio_write(struct mii_dev *bus,
|
|
int addr, int devad, int reg, u16 val)
|
|
{
|
|
struct mdio_regs *adap_mdio = bus->priv;
|
|
|
|
while (readl(&adap_mdio->useraccess0) & MDIO_USERACCESS0_GO)
|
|
;
|
|
|
|
writel(MDIO_USERACCESS0_GO | MDIO_USERACCESS0_WRITE_WRITE |
|
|
((reg & 0x1f) << 21) | ((addr & 0x1f) << 16) |
|
|
(val & 0xffff), &adap_mdio->useraccess0);
|
|
|
|
/* Wait for command to complete */
|
|
while (readl(&adap_mdio->useraccess0) & MDIO_USERACCESS0_GO)
|
|
;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifndef CONFIG_DM_ETH
|
|
static void __attribute__((unused))
|
|
keystone2_eth_gigabit_enable(struct eth_device *dev)
|
|
{
|
|
u_int16_t data;
|
|
struct eth_priv_t *eth_priv = (struct eth_priv_t *)dev->priv;
|
|
|
|
if (sys_has_mdio) {
|
|
data = keystone2_mdio_read(mdio_bus, eth_priv->phy_addr,
|
|
MDIO_DEVAD_NONE, 0);
|
|
/* speed selection MSB */
|
|
if (!(data & (1 << 6)))
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Check if link detected is giga-bit
|
|
* If Gigabit mode detected, enable gigbit in MAC
|
|
*/
|
|
writel(readl(DEVICE_EMACSL_BASE(eth_priv->slave_port - 1) +
|
|
CPGMACSL_REG_CTL) |
|
|
EMAC_MACCONTROL_GIGFORCE | EMAC_MACCONTROL_GIGABIT_ENABLE,
|
|
DEVICE_EMACSL_BASE(eth_priv->slave_port - 1) + CPGMACSL_REG_CTL);
|
|
}
|
|
#else
|
|
static void __attribute__((unused))
|
|
keystone2_eth_gigabit_enable(struct udevice *dev)
|
|
{
|
|
struct ks2_eth_priv *priv = dev_get_priv(dev);
|
|
u_int16_t data;
|
|
|
|
if (priv->has_mdio) {
|
|
data = keystone2_mdio_read(priv->mdio_bus, priv->phy_addr,
|
|
MDIO_DEVAD_NONE, 0);
|
|
/* speed selection MSB */
|
|
if (!(data & (1 << 6)))
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Check if link detected is giga-bit
|
|
* If Gigabit mode detected, enable gigbit in MAC
|
|
*/
|
|
writel(readl(DEVICE_EMACSL_BASE(priv->slave_port - 1) +
|
|
CPGMACSL_REG_CTL) |
|
|
EMAC_MACCONTROL_GIGFORCE | EMAC_MACCONTROL_GIGABIT_ENABLE,
|
|
DEVICE_EMACSL_BASE(priv->slave_port - 1) + CPGMACSL_REG_CTL);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_SOC_K2G
|
|
int keystone_rgmii_config(struct phy_device *phy_dev)
|
|
{
|
|
unsigned int i, status;
|
|
|
|
i = 0;
|
|
do {
|
|
if (i > SGMII_ANEG_TIMEOUT) {
|
|
puts(" TIMEOUT !\n");
|
|
phy_dev->link = 0;
|
|
return 0;
|
|
}
|
|
|
|
if (ctrlc()) {
|
|
puts("user interrupt!\n");
|
|
phy_dev->link = 0;
|
|
return -EINTR;
|
|
}
|
|
|
|
if ((i++ % 500) == 0)
|
|
printf(".");
|
|
|
|
udelay(1000); /* 1 ms */
|
|
status = readl(RGMII_STATUS_REG);
|
|
} while (!(status & RGMII_REG_STATUS_LINK));
|
|
|
|
puts(" done\n");
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
int keystone_sgmii_config(struct phy_device *phy_dev, int port, int interface)
|
|
{
|
|
unsigned int i, status, mask;
|
|
unsigned int mr_adv_ability, control;
|
|
|
|
switch (interface) {
|
|
case SGMII_LINK_MAC_MAC_AUTONEG:
|
|
mr_adv_ability = (SGMII_REG_MR_ADV_ENABLE |
|
|
SGMII_REG_MR_ADV_LINK |
|
|
SGMII_REG_MR_ADV_FULL_DUPLEX |
|
|
SGMII_REG_MR_ADV_GIG_MODE);
|
|
control = (SGMII_REG_CONTROL_MASTER |
|
|
SGMII_REG_CONTROL_AUTONEG);
|
|
|
|
break;
|
|
case SGMII_LINK_MAC_PHY:
|
|
case SGMII_LINK_MAC_PHY_FORCED:
|
|
mr_adv_ability = SGMII_REG_MR_ADV_ENABLE;
|
|
control = SGMII_REG_CONTROL_AUTONEG;
|
|
|
|
break;
|
|
case SGMII_LINK_MAC_MAC_FORCED:
|
|
mr_adv_ability = (SGMII_REG_MR_ADV_ENABLE |
|
|
SGMII_REG_MR_ADV_LINK |
|
|
SGMII_REG_MR_ADV_FULL_DUPLEX |
|
|
SGMII_REG_MR_ADV_GIG_MODE);
|
|
control = SGMII_REG_CONTROL_MASTER;
|
|
|
|
break;
|
|
case SGMII_LINK_MAC_FIBER:
|
|
mr_adv_ability = 0x20;
|
|
control = SGMII_REG_CONTROL_AUTONEG;
|
|
|
|
break;
|
|
default:
|
|
mr_adv_ability = SGMII_REG_MR_ADV_ENABLE;
|
|
control = SGMII_REG_CONTROL_AUTONEG;
|
|
}
|
|
|
|
__raw_writel(0, SGMII_CTL_REG(port));
|
|
|
|
/*
|
|
* Wait for the SerDes pll to lock,
|
|
* but don't trap if lock is never read
|
|
*/
|
|
for (i = 0; i < 1000; i++) {
|
|
udelay(2000);
|
|
status = __raw_readl(SGMII_STATUS_REG(port));
|
|
if ((status & SGMII_REG_STATUS_LOCK) != 0)
|
|
break;
|
|
}
|
|
|
|
__raw_writel(mr_adv_ability, SGMII_MRADV_REG(port));
|
|
__raw_writel(control, SGMII_CTL_REG(port));
|
|
|
|
|
|
mask = SGMII_REG_STATUS_LINK;
|
|
|
|
if (control & SGMII_REG_CONTROL_AUTONEG)
|
|
mask |= SGMII_REG_STATUS_AUTONEG;
|
|
|
|
status = __raw_readl(SGMII_STATUS_REG(port));
|
|
if ((status & mask) == mask)
|
|
return 0;
|
|
|
|
printf("\n%s Waiting for SGMII auto negotiation to complete",
|
|
phy_dev->dev->name);
|
|
while ((status & mask) != mask) {
|
|
/*
|
|
* Timeout reached ?
|
|
*/
|
|
if (i > SGMII_ANEG_TIMEOUT) {
|
|
puts(" TIMEOUT !\n");
|
|
phy_dev->link = 0;
|
|
return 0;
|
|
}
|
|
|
|
if (ctrlc()) {
|
|
puts("user interrupt!\n");
|
|
phy_dev->link = 0;
|
|
return -EINTR;
|
|
}
|
|
|
|
if ((i++ % 500) == 0)
|
|
printf(".");
|
|
|
|
udelay(1000); /* 1 ms */
|
|
status = __raw_readl(SGMII_STATUS_REG(port));
|
|
}
|
|
puts(" done\n");
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
int mac_sl_reset(u32 port)
|
|
{
|
|
u32 i, v;
|
|
|
|
if (port >= DEVICE_N_GMACSL_PORTS)
|
|
return GMACSL_RET_INVALID_PORT;
|
|
|
|
/* Set the soft reset bit */
|
|
writel(CPGMAC_REG_RESET_VAL_RESET,
|
|
DEVICE_EMACSL_BASE(port) + CPGMACSL_REG_RESET);
|
|
|
|
/* Wait for the bit to clear */
|
|
for (i = 0; i < DEVICE_EMACSL_RESET_POLL_COUNT; i++) {
|
|
v = readl(DEVICE_EMACSL_BASE(port) + CPGMACSL_REG_RESET);
|
|
if ((v & CPGMAC_REG_RESET_VAL_RESET_MASK) !=
|
|
CPGMAC_REG_RESET_VAL_RESET)
|
|
return GMACSL_RET_OK;
|
|
}
|
|
|
|
/* Timeout on the reset */
|
|
return GMACSL_RET_WARN_RESET_INCOMPLETE;
|
|
}
|
|
|
|
int mac_sl_config(u_int16_t port, struct mac_sl_cfg *cfg)
|
|
{
|
|
u32 v, i;
|
|
int ret = GMACSL_RET_OK;
|
|
|
|
if (port >= DEVICE_N_GMACSL_PORTS)
|
|
return GMACSL_RET_INVALID_PORT;
|
|
|
|
if (cfg->max_rx_len > CPGMAC_REG_MAXLEN_LEN) {
|
|
cfg->max_rx_len = CPGMAC_REG_MAXLEN_LEN;
|
|
ret = GMACSL_RET_WARN_MAXLEN_TOO_BIG;
|
|
}
|
|
|
|
/* Must wait if the device is undergoing reset */
|
|
for (i = 0; i < DEVICE_EMACSL_RESET_POLL_COUNT; i++) {
|
|
v = readl(DEVICE_EMACSL_BASE(port) + CPGMACSL_REG_RESET);
|
|
if ((v & CPGMAC_REG_RESET_VAL_RESET_MASK) !=
|
|
CPGMAC_REG_RESET_VAL_RESET)
|
|
break;
|
|
}
|
|
|
|
if (i == DEVICE_EMACSL_RESET_POLL_COUNT)
|
|
return GMACSL_RET_CONFIG_FAIL_RESET_ACTIVE;
|
|
|
|
writel(cfg->max_rx_len, DEVICE_EMACSL_BASE(port) + CPGMACSL_REG_MAXLEN);
|
|
writel(cfg->ctl, DEVICE_EMACSL_BASE(port) + CPGMACSL_REG_CTL);
|
|
|
|
#ifndef CONFIG_SOC_K2HK
|
|
/* Map RX packet flow priority to 0 */
|
|
writel(0, DEVICE_EMACSL_BASE(port) + CPGMACSL_REG_RX_PRI_MAP);
|
|
#endif
|
|
|
|
return ret;
|
|
}
|
|
|
|
int ethss_config(u32 ctl, u32 max_pkt_size)
|
|
{
|
|
u32 i;
|
|
|
|
/* Max length register */
|
|
writel(max_pkt_size, DEVICE_CPSW_BASE + CPSW_REG_MAXLEN);
|
|
|
|
/* Control register */
|
|
writel(ctl, DEVICE_CPSW_BASE + CPSW_REG_CTL);
|
|
|
|
/* All statistics enabled by default */
|
|
writel(CPSW_REG_VAL_STAT_ENABLE_ALL,
|
|
DEVICE_CPSW_BASE + CPSW_REG_STAT_PORT_EN);
|
|
|
|
/* Reset and enable the ALE */
|
|
writel(CPSW_REG_VAL_ALE_CTL_RESET_AND_ENABLE |
|
|
CPSW_REG_VAL_ALE_CTL_BYPASS,
|
|
DEVICE_CPSW_BASE + CPSW_REG_ALE_CONTROL);
|
|
|
|
/* All ports put into forward mode */
|
|
for (i = 0; i < DEVICE_CPSW_NUM_PORTS; i++)
|
|
writel(CPSW_REG_VAL_PORTCTL_FORWARD_MODE,
|
|
DEVICE_CPSW_BASE + CPSW_REG_ALE_PORTCTL(i));
|
|
|
|
return 0;
|
|
}
|
|
|
|
int ethss_start(void)
|
|
{
|
|
int i;
|
|
struct mac_sl_cfg cfg;
|
|
|
|
cfg.max_rx_len = MAX_SIZE_STREAM_BUFFER;
|
|
cfg.ctl = GMACSL_ENABLE | GMACSL_RX_ENABLE_EXT_CTL;
|
|
|
|
for (i = 0; i < DEVICE_N_GMACSL_PORTS; i++) {
|
|
mac_sl_reset(i);
|
|
mac_sl_config(i, &cfg);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int ethss_stop(void)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < DEVICE_N_GMACSL_PORTS; i++)
|
|
mac_sl_reset(i);
|
|
|
|
return 0;
|
|
}
|
|
|
|
struct ks2_serdes ks2_serdes_sgmii_156p25mhz = {
|
|
.clk = SERDES_CLOCK_156P25M,
|
|
.rate = SERDES_RATE_5G,
|
|
.rate_mode = SERDES_QUARTER_RATE,
|
|
.intf = SERDES_PHY_SGMII,
|
|
.loopback = 0,
|
|
};
|
|
|
|
#ifndef CONFIG_SOC_K2G
|
|
static void keystone2_net_serdes_setup(void)
|
|
{
|
|
ks2_serdes_init(CONFIG_KSNET_SERDES_SGMII_BASE,
|
|
&ks2_serdes_sgmii_156p25mhz,
|
|
CONFIG_KSNET_SERDES_LANES_PER_SGMII);
|
|
|
|
#if defined(CONFIG_SOC_K2E) || defined(CONFIG_SOC_K2L)
|
|
ks2_serdes_init(CONFIG_KSNET_SERDES_SGMII2_BASE,
|
|
&ks2_serdes_sgmii_156p25mhz,
|
|
CONFIG_KSNET_SERDES_LANES_PER_SGMII);
|
|
#endif
|
|
|
|
/* wait till setup */
|
|
udelay(5000);
|
|
}
|
|
#endif
|
|
|
|
#ifndef CONFIG_DM_ETH
|
|
|
|
int keystone2_eth_read_mac_addr(struct eth_device *dev)
|
|
{
|
|
struct eth_priv_t *eth_priv;
|
|
u32 maca = 0;
|
|
u32 macb = 0;
|
|
|
|
eth_priv = (struct eth_priv_t *)dev->priv;
|
|
|
|
/* Read the e-fuse mac address */
|
|
if (eth_priv->slave_port == 1) {
|
|
maca = __raw_readl(MAC_ID_BASE_ADDR);
|
|
macb = __raw_readl(MAC_ID_BASE_ADDR + 4);
|
|
}
|
|
|
|
dev->enetaddr[0] = (macb >> 8) & 0xff;
|
|
dev->enetaddr[1] = (macb >> 0) & 0xff;
|
|
dev->enetaddr[2] = (maca >> 24) & 0xff;
|
|
dev->enetaddr[3] = (maca >> 16) & 0xff;
|
|
dev->enetaddr[4] = (maca >> 8) & 0xff;
|
|
dev->enetaddr[5] = (maca >> 0) & 0xff;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int32_t cpmac_drv_send(u32 *buffer, int num_bytes, int slave_port_num)
|
|
{
|
|
if (num_bytes < EMAC_MIN_ETHERNET_PKT_SIZE)
|
|
num_bytes = EMAC_MIN_ETHERNET_PKT_SIZE;
|
|
|
|
return ksnav_send(&netcp_pktdma, buffer,
|
|
num_bytes, (slave_port_num) << 16);
|
|
}
|
|
|
|
/* Eth device open */
|
|
static int keystone2_eth_open(struct eth_device *dev, bd_t *bis)
|
|
{
|
|
struct eth_priv_t *eth_priv = (struct eth_priv_t *)dev->priv;
|
|
struct phy_device *phy_dev = eth_priv->phy_dev;
|
|
|
|
debug("+ emac_open\n");
|
|
|
|
net_rx_buffs.rx_flow = eth_priv->rx_flow;
|
|
|
|
sys_has_mdio =
|
|
(eth_priv->sgmii_link_type == SGMII_LINK_MAC_PHY) ? 1 : 0;
|
|
|
|
if (sys_has_mdio)
|
|
keystone2_mdio_reset(mdio_bus);
|
|
|
|
#ifdef CONFIG_SOC_K2G
|
|
keystone_rgmii_config(phy_dev);
|
|
#else
|
|
keystone_sgmii_config(phy_dev, eth_priv->slave_port - 1,
|
|
eth_priv->sgmii_link_type);
|
|
#endif
|
|
|
|
udelay(10000);
|
|
|
|
/* On chip switch configuration */
|
|
ethss_config(target_get_switch_ctl(), SWITCH_MAX_PKT_SIZE);
|
|
|
|
/* TODO: add error handling code */
|
|
if (qm_init()) {
|
|
printf("ERROR: qm_init()\n");
|
|
return -1;
|
|
}
|
|
if (ksnav_init(&netcp_pktdma, &net_rx_buffs)) {
|
|
qm_close();
|
|
printf("ERROR: netcp_init()\n");
|
|
return -1;
|
|
}
|
|
|
|
/*
|
|
* Streaming switch configuration. If not present this
|
|
* statement is defined to void in target.h.
|
|
* If present this is usually defined to a series of register writes
|
|
*/
|
|
hw_config_streaming_switch();
|
|
|
|
if (sys_has_mdio) {
|
|
keystone2_mdio_reset(mdio_bus);
|
|
|
|
phy_startup(phy_dev);
|
|
if (phy_dev->link == 0) {
|
|
ksnav_close(&netcp_pktdma);
|
|
qm_close();
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
emac_gigabit_enable(dev);
|
|
|
|
ethss_start();
|
|
|
|
debug("- emac_open\n");
|
|
|
|
emac_open = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Eth device close */
|
|
void keystone2_eth_close(struct eth_device *dev)
|
|
{
|
|
struct eth_priv_t *eth_priv = (struct eth_priv_t *)dev->priv;
|
|
struct phy_device *phy_dev = eth_priv->phy_dev;
|
|
|
|
debug("+ emac_close\n");
|
|
|
|
if (!emac_open)
|
|
return;
|
|
|
|
ethss_stop();
|
|
|
|
ksnav_close(&netcp_pktdma);
|
|
qm_close();
|
|
phy_shutdown(phy_dev);
|
|
|
|
emac_open = 0;
|
|
|
|
debug("- emac_close\n");
|
|
}
|
|
|
|
/*
|
|
* This function sends a single packet on the network and returns
|
|
* positive number (number of bytes transmitted) or negative for error
|
|
*/
|
|
static int keystone2_eth_send_packet(struct eth_device *dev,
|
|
void *packet, int length)
|
|
{
|
|
int ret_status = -1;
|
|
struct eth_priv_t *eth_priv = (struct eth_priv_t *)dev->priv;
|
|
struct phy_device *phy_dev = eth_priv->phy_dev;
|
|
|
|
genphy_update_link(phy_dev);
|
|
if (phy_dev->link == 0)
|
|
return -1;
|
|
|
|
if (cpmac_drv_send((u32 *)packet, length, eth_priv->slave_port) != 0)
|
|
return ret_status;
|
|
|
|
return length;
|
|
}
|
|
|
|
/*
|
|
* This function handles receipt of a packet from the network
|
|
*/
|
|
static int keystone2_eth_rcv_packet(struct eth_device *dev)
|
|
{
|
|
void *hd;
|
|
int pkt_size;
|
|
u32 *pkt;
|
|
|
|
hd = ksnav_recv(&netcp_pktdma, &pkt, &pkt_size);
|
|
if (hd == NULL)
|
|
return 0;
|
|
|
|
net_process_received_packet((uchar *)pkt, pkt_size);
|
|
|
|
ksnav_release_rxhd(&netcp_pktdma, hd);
|
|
|
|
return pkt_size;
|
|
}
|
|
|
|
#ifdef CONFIG_MCAST_TFTP
|
|
static int keystone2_eth_bcast_addr(struct eth_device *dev, u32 ip, u8 set)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* This function initializes the EMAC hardware.
|
|
*/
|
|
int keystone2_emac_initialize(struct eth_priv_t *eth_priv)
|
|
{
|
|
int res;
|
|
struct eth_device *dev;
|
|
struct phy_device *phy_dev;
|
|
struct mdio_regs *adap_mdio = (struct mdio_regs *)EMAC_MDIO_BASE_ADDR;
|
|
|
|
dev = malloc(sizeof(struct eth_device));
|
|
if (dev == NULL)
|
|
return -1;
|
|
|
|
memset(dev, 0, sizeof(struct eth_device));
|
|
|
|
strcpy(dev->name, eth_priv->int_name);
|
|
dev->priv = eth_priv;
|
|
|
|
keystone2_eth_read_mac_addr(dev);
|
|
|
|
dev->iobase = 0;
|
|
dev->init = keystone2_eth_open;
|
|
dev->halt = keystone2_eth_close;
|
|
dev->send = keystone2_eth_send_packet;
|
|
dev->recv = keystone2_eth_rcv_packet;
|
|
#ifdef CONFIG_MCAST_TFTP
|
|
dev->mcast = keystone2_eth_bcast_addr;
|
|
#endif
|
|
|
|
eth_register(dev);
|
|
|
|
/* Register MDIO bus if it's not registered yet */
|
|
if (!mdio_bus) {
|
|
mdio_bus = mdio_alloc();
|
|
mdio_bus->read = keystone2_mdio_read;
|
|
mdio_bus->write = keystone2_mdio_write;
|
|
mdio_bus->reset = keystone2_mdio_reset;
|
|
mdio_bus->priv = (void *)EMAC_MDIO_BASE_ADDR;
|
|
strcpy(mdio_bus->name, "ethernet-mdio");
|
|
|
|
res = mdio_register(mdio_bus);
|
|
if (res)
|
|
return res;
|
|
}
|
|
|
|
#ifndef CONFIG_SOC_K2G
|
|
keystone2_net_serdes_setup();
|
|
#endif
|
|
|
|
/* Create phy device and bind it with driver */
|
|
#ifdef CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE
|
|
phy_dev = phy_connect(mdio_bus, eth_priv->phy_addr,
|
|
dev, eth_priv->phy_if);
|
|
phy_config(phy_dev);
|
|
#else
|
|
phy_dev = phy_find_by_mask(mdio_bus, 1 << eth_priv->phy_addr,
|
|
eth_priv->phy_if);
|
|
phy_dev->dev = dev;
|
|
#endif
|
|
eth_priv->phy_dev = phy_dev;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#else
|
|
|
|
static int ks2_eth_start(struct udevice *dev)
|
|
{
|
|
struct ks2_eth_priv *priv = dev_get_priv(dev);
|
|
|
|
#ifdef CONFIG_SOC_K2G
|
|
keystone_rgmii_config(priv->phydev);
|
|
#else
|
|
keystone_sgmii_config(priv->phydev, priv->slave_port - 1,
|
|
priv->sgmii_link_type);
|
|
#endif
|
|
|
|
udelay(10000);
|
|
|
|
/* On chip switch configuration */
|
|
ethss_config(target_get_switch_ctl(), SWITCH_MAX_PKT_SIZE);
|
|
|
|
qm_init();
|
|
|
|
if (ksnav_init(priv->netcp_pktdma, &priv->net_rx_buffs)) {
|
|
pr_err("ksnav_init failed\n");
|
|
goto err_knav_init;
|
|
}
|
|
|
|
/*
|
|
* Streaming switch configuration. If not present this
|
|
* statement is defined to void in target.h.
|
|
* If present this is usually defined to a series of register writes
|
|
*/
|
|
hw_config_streaming_switch();
|
|
|
|
if (priv->has_mdio) {
|
|
keystone2_mdio_reset(priv->mdio_bus);
|
|
|
|
phy_startup(priv->phydev);
|
|
if (priv->phydev->link == 0) {
|
|
pr_err("phy startup failed\n");
|
|
goto err_phy_start;
|
|
}
|
|
}
|
|
|
|
emac_gigabit_enable(dev);
|
|
|
|
ethss_start();
|
|
|
|
priv->emac_open = true;
|
|
|
|
return 0;
|
|
|
|
err_phy_start:
|
|
ksnav_close(priv->netcp_pktdma);
|
|
err_knav_init:
|
|
qm_close();
|
|
|
|
return -EFAULT;
|
|
}
|
|
|
|
static int ks2_eth_send(struct udevice *dev, void *packet, int length)
|
|
{
|
|
struct ks2_eth_priv *priv = dev_get_priv(dev);
|
|
|
|
genphy_update_link(priv->phydev);
|
|
if (priv->phydev->link == 0)
|
|
return -1;
|
|
|
|
if (length < EMAC_MIN_ETHERNET_PKT_SIZE)
|
|
length = EMAC_MIN_ETHERNET_PKT_SIZE;
|
|
|
|
return ksnav_send(priv->netcp_pktdma, (u32 *)packet,
|
|
length, (priv->slave_port) << 16);
|
|
}
|
|
|
|
static int ks2_eth_recv(struct udevice *dev, int flags, uchar **packetp)
|
|
{
|
|
struct ks2_eth_priv *priv = dev_get_priv(dev);
|
|
int pkt_size;
|
|
u32 *pkt = NULL;
|
|
|
|
priv->hd = ksnav_recv(priv->netcp_pktdma, &pkt, &pkt_size);
|
|
if (priv->hd == NULL)
|
|
return -EAGAIN;
|
|
|
|
*packetp = (uchar *)pkt;
|
|
|
|
return pkt_size;
|
|
}
|
|
|
|
static int ks2_eth_free_pkt(struct udevice *dev, uchar *packet,
|
|
int length)
|
|
{
|
|
struct ks2_eth_priv *priv = dev_get_priv(dev);
|
|
|
|
ksnav_release_rxhd(priv->netcp_pktdma, priv->hd);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ks2_eth_stop(struct udevice *dev)
|
|
{
|
|
struct ks2_eth_priv *priv = dev_get_priv(dev);
|
|
|
|
if (!priv->emac_open)
|
|
return;
|
|
ethss_stop();
|
|
|
|
ksnav_close(priv->netcp_pktdma);
|
|
qm_close();
|
|
phy_shutdown(priv->phydev);
|
|
priv->emac_open = false;
|
|
}
|
|
|
|
int ks2_eth_read_rom_hwaddr(struct udevice *dev)
|
|
{
|
|
struct ks2_eth_priv *priv = dev_get_priv(dev);
|
|
struct eth_pdata *pdata = dev_get_platdata(dev);
|
|
u32 maca = 0;
|
|
u32 macb = 0;
|
|
|
|
/* Read the e-fuse mac address */
|
|
if (priv->slave_port == 1) {
|
|
maca = __raw_readl(MAC_ID_BASE_ADDR);
|
|
macb = __raw_readl(MAC_ID_BASE_ADDR + 4);
|
|
}
|
|
|
|
pdata->enetaddr[0] = (macb >> 8) & 0xff;
|
|
pdata->enetaddr[1] = (macb >> 0) & 0xff;
|
|
pdata->enetaddr[2] = (maca >> 24) & 0xff;
|
|
pdata->enetaddr[3] = (maca >> 16) & 0xff;
|
|
pdata->enetaddr[4] = (maca >> 8) & 0xff;
|
|
pdata->enetaddr[5] = (maca >> 0) & 0xff;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int ks2_eth_write_hwaddr(struct udevice *dev)
|
|
{
|
|
struct ks2_eth_priv *priv = dev_get_priv(dev);
|
|
struct eth_pdata *pdata = dev_get_platdata(dev);
|
|
|
|
writel(mac_hi(pdata->enetaddr),
|
|
DEVICE_EMACSW_BASE(pdata->iobase, priv->slave_port - 1) +
|
|
CPGMACSL_REG_SA_HI);
|
|
writel(mac_lo(pdata->enetaddr),
|
|
DEVICE_EMACSW_BASE(pdata->iobase, priv->slave_port - 1) +
|
|
CPGMACSL_REG_SA_LO);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ks2_eth_probe(struct udevice *dev)
|
|
{
|
|
struct ks2_eth_priv *priv = dev_get_priv(dev);
|
|
struct mii_dev *mdio_bus;
|
|
int ret;
|
|
|
|
priv->dev = dev;
|
|
|
|
/* These clock enables has to be moved to common location */
|
|
if (cpu_is_k2g())
|
|
writel(KS2_ETHERNET_RGMII, KS2_ETHERNET_CFG);
|
|
|
|
/* By default, select PA PLL clock as PA clock source */
|
|
#ifndef CONFIG_SOC_K2G
|
|
if (psc_enable_module(KS2_LPSC_PA))
|
|
return -EACCES;
|
|
#endif
|
|
if (psc_enable_module(KS2_LPSC_CPGMAC))
|
|
return -EACCES;
|
|
if (psc_enable_module(KS2_LPSC_CRYPTO))
|
|
return -EACCES;
|
|
|
|
if (cpu_is_k2e() || cpu_is_k2l())
|
|
pll_pa_clk_sel();
|
|
|
|
|
|
priv->net_rx_buffs.buff_ptr = rx_buffs;
|
|
priv->net_rx_buffs.num_buffs = RX_BUFF_NUMS;
|
|
priv->net_rx_buffs.buff_len = RX_BUFF_LEN;
|
|
|
|
if (priv->slave_port == 1) {
|
|
/*
|
|
* Register MDIO bus for slave 0 only, other slave have
|
|
* to re-use the same
|
|
*/
|
|
mdio_bus = mdio_alloc();
|
|
if (!mdio_bus) {
|
|
pr_err("MDIO alloc failed\n");
|
|
return -ENOMEM;
|
|
}
|
|
priv->mdio_bus = mdio_bus;
|
|
mdio_bus->read = keystone2_mdio_read;
|
|
mdio_bus->write = keystone2_mdio_write;
|
|
mdio_bus->reset = keystone2_mdio_reset;
|
|
mdio_bus->priv = priv->mdio_base;
|
|
sprintf(mdio_bus->name, "ethernet-mdio");
|
|
|
|
ret = mdio_register(mdio_bus);
|
|
if (ret) {
|
|
pr_err("MDIO bus register failed\n");
|
|
return ret;
|
|
}
|
|
} else {
|
|
/* Get the MDIO bus from slave 0 device */
|
|
struct ks2_eth_priv *parent_priv;
|
|
|
|
parent_priv = dev_get_priv(dev->parent);
|
|
priv->mdio_bus = parent_priv->mdio_bus;
|
|
}
|
|
|
|
#ifndef CONFIG_SOC_K2G
|
|
keystone2_net_serdes_setup();
|
|
#endif
|
|
|
|
priv->netcp_pktdma = &netcp_pktdma;
|
|
|
|
if (priv->has_mdio) {
|
|
priv->phydev = phy_connect(priv->mdio_bus, priv->phy_addr,
|
|
dev, priv->phy_if);
|
|
phy_config(priv->phydev);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int ks2_eth_remove(struct udevice *dev)
|
|
{
|
|
struct ks2_eth_priv *priv = dev_get_priv(dev);
|
|
|
|
free(priv->phydev);
|
|
mdio_unregister(priv->mdio_bus);
|
|
mdio_free(priv->mdio_bus);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct eth_ops ks2_eth_ops = {
|
|
.start = ks2_eth_start,
|
|
.send = ks2_eth_send,
|
|
.recv = ks2_eth_recv,
|
|
.free_pkt = ks2_eth_free_pkt,
|
|
.stop = ks2_eth_stop,
|
|
.read_rom_hwaddr = ks2_eth_read_rom_hwaddr,
|
|
.write_hwaddr = ks2_eth_write_hwaddr,
|
|
};
|
|
|
|
static int ks2_eth_bind_slaves(struct udevice *dev, int gbe, int *gbe_0)
|
|
{
|
|
const void *fdt = gd->fdt_blob;
|
|
struct udevice *sl_dev;
|
|
int interfaces;
|
|
int sec_slave;
|
|
int slave;
|
|
int ret;
|
|
char *slave_name;
|
|
|
|
interfaces = fdt_subnode_offset(fdt, gbe, "interfaces");
|
|
fdt_for_each_subnode(slave, fdt, interfaces) {
|
|
int slave_no;
|
|
|
|
slave_no = fdtdec_get_int(fdt, slave, "slave-port", -ENOENT);
|
|
if (slave_no == -ENOENT)
|
|
continue;
|
|
|
|
if (slave_no == 0) {
|
|
/* This is the current eth device */
|
|
*gbe_0 = slave;
|
|
} else {
|
|
/* Slave devices to be registered */
|
|
slave_name = malloc(20);
|
|
snprintf(slave_name, 20, "netcp@slave-%d", slave_no);
|
|
ret = device_bind_driver_to_node(dev, "eth_ks2_sl",
|
|
slave_name, offset_to_ofnode(slave),
|
|
&sl_dev);
|
|
if (ret) {
|
|
pr_err("ks2_net - not able to bind slave interfaces\n");
|
|
return ret;
|
|
}
|
|
}
|
|
}
|
|
|
|
sec_slave = fdt_subnode_offset(fdt, gbe, "secondary-slave-ports");
|
|
fdt_for_each_subnode(slave, fdt, sec_slave) {
|
|
int slave_no;
|
|
|
|
slave_no = fdtdec_get_int(fdt, slave, "slave-port", -ENOENT);
|
|
if (slave_no == -ENOENT)
|
|
continue;
|
|
|
|
/* Slave devices to be registered */
|
|
slave_name = malloc(20);
|
|
snprintf(slave_name, 20, "netcp@slave-%d", slave_no);
|
|
ret = device_bind_driver_to_node(dev, "eth_ks2_sl", slave_name,
|
|
offset_to_ofnode(slave), &sl_dev);
|
|
if (ret) {
|
|
pr_err("ks2_net - not able to bind slave interfaces\n");
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ks2_eth_parse_slave_interface(int netcp, int slave,
|
|
struct ks2_eth_priv *priv,
|
|
struct eth_pdata *pdata)
|
|
{
|
|
const void *fdt = gd->fdt_blob;
|
|
int mdio;
|
|
int phy;
|
|
int dma_count;
|
|
u32 dma_channel[8];
|
|
|
|
priv->slave_port = fdtdec_get_int(fdt, slave, "slave-port", -1);
|
|
priv->net_rx_buffs.rx_flow = priv->slave_port * 8;
|
|
|
|
/* U-Boot slave port number starts with 1 instead of 0 */
|
|
priv->slave_port += 1;
|
|
|
|
dma_count = fdtdec_get_int_array_count(fdt, netcp,
|
|
"ti,navigator-dmas",
|
|
dma_channel, 8);
|
|
|
|
if (dma_count > (2 * priv->slave_port)) {
|
|
int dma_idx;
|
|
|
|
dma_idx = priv->slave_port * 2 - 1;
|
|
priv->net_rx_buffs.rx_flow = dma_channel[dma_idx];
|
|
}
|
|
|
|
priv->link_type = fdtdec_get_int(fdt, slave, "link-interface", -1);
|
|
|
|
phy = fdtdec_lookup_phandle(fdt, slave, "phy-handle");
|
|
if (phy >= 0) {
|
|
priv->phy_addr = fdtdec_get_int(fdt, phy, "reg", -1);
|
|
|
|
mdio = fdt_parent_offset(fdt, phy);
|
|
if (mdio < 0) {
|
|
pr_err("mdio dt not found\n");
|
|
return -ENODEV;
|
|
}
|
|
priv->mdio_base = (void *)fdtdec_get_addr(fdt, mdio, "reg");
|
|
}
|
|
|
|
if (priv->link_type == LINK_TYPE_SGMII_MAC_TO_PHY_MODE) {
|
|
priv->phy_if = PHY_INTERFACE_MODE_SGMII;
|
|
pdata->phy_interface = priv->phy_if;
|
|
priv->sgmii_link_type = SGMII_LINK_MAC_PHY;
|
|
priv->has_mdio = true;
|
|
} else if (priv->link_type == LINK_TYPE_RGMII_LINK_MAC_PHY) {
|
|
priv->phy_if = PHY_INTERFACE_MODE_RGMII;
|
|
pdata->phy_interface = priv->phy_if;
|
|
priv->has_mdio = true;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ks2_sl_eth_ofdata_to_platdata(struct udevice *dev)
|
|
{
|
|
struct ks2_eth_priv *priv = dev_get_priv(dev);
|
|
struct eth_pdata *pdata = dev_get_platdata(dev);
|
|
const void *fdt = gd->fdt_blob;
|
|
int slave = dev_of_offset(dev);
|
|
int interfaces;
|
|
int gbe;
|
|
int netcp_devices;
|
|
int netcp;
|
|
|
|
interfaces = fdt_parent_offset(fdt, slave);
|
|
gbe = fdt_parent_offset(fdt, interfaces);
|
|
netcp_devices = fdt_parent_offset(fdt, gbe);
|
|
netcp = fdt_parent_offset(fdt, netcp_devices);
|
|
|
|
ks2_eth_parse_slave_interface(netcp, slave, priv, pdata);
|
|
|
|
pdata->iobase = fdtdec_get_addr(fdt, netcp, "reg");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ks2_eth_ofdata_to_platdata(struct udevice *dev)
|
|
{
|
|
struct ks2_eth_priv *priv = dev_get_priv(dev);
|
|
struct eth_pdata *pdata = dev_get_platdata(dev);
|
|
const void *fdt = gd->fdt_blob;
|
|
int gbe_0 = -ENODEV;
|
|
int netcp_devices;
|
|
int gbe;
|
|
|
|
netcp_devices = fdt_subnode_offset(fdt, dev_of_offset(dev),
|
|
"netcp-devices");
|
|
gbe = fdt_subnode_offset(fdt, netcp_devices, "gbe");
|
|
|
|
ks2_eth_bind_slaves(dev, gbe, &gbe_0);
|
|
|
|
ks2_eth_parse_slave_interface(dev_of_offset(dev), gbe_0, priv, pdata);
|
|
|
|
pdata->iobase = devfdt_get_addr(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct udevice_id ks2_eth_ids[] = {
|
|
{ .compatible = "ti,netcp-1.0" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(eth_ks2_slave) = {
|
|
.name = "eth_ks2_sl",
|
|
.id = UCLASS_ETH,
|
|
.ofdata_to_platdata = ks2_sl_eth_ofdata_to_platdata,
|
|
.probe = ks2_eth_probe,
|
|
.remove = ks2_eth_remove,
|
|
.ops = &ks2_eth_ops,
|
|
.priv_auto_alloc_size = sizeof(struct ks2_eth_priv),
|
|
.platdata_auto_alloc_size = sizeof(struct eth_pdata),
|
|
.flags = DM_FLAG_ALLOC_PRIV_DMA,
|
|
};
|
|
|
|
U_BOOT_DRIVER(eth_ks2) = {
|
|
.name = "eth_ks2",
|
|
.id = UCLASS_ETH,
|
|
.of_match = ks2_eth_ids,
|
|
.ofdata_to_platdata = ks2_eth_ofdata_to_platdata,
|
|
.probe = ks2_eth_probe,
|
|
.remove = ks2_eth_remove,
|
|
.ops = &ks2_eth_ops,
|
|
.priv_auto_alloc_size = sizeof(struct ks2_eth_priv),
|
|
.platdata_auto_alloc_size = sizeof(struct eth_pdata),
|
|
.flags = DM_FLAG_ALLOC_PRIV_DMA,
|
|
};
|
|
#endif
|