mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-26 14:40:41 +00:00
42d1f0394b
- Added Motorola CPU 8540/8560 support (cpu/85xx) - Added Motorola MPC8540ADS board support (board/mpc8540ads) - Added Motorola MPC8560ADS board support (board/mpc8560ads) * Minor code cleanup
292 lines
7.4 KiB
C
292 lines
7.4 KiB
C
/******************************************************************************
|
|
*
|
|
* Name: sklm80.c
|
|
* Project: GEnesis, PCI Gigabit Ethernet Adapter
|
|
* Version: $Revision: 1.20 $
|
|
* Date: $Date: 2002/08/13 09:16:27 $
|
|
* Purpose: Funktions to access Voltage and Temperature Sensor (LM80)
|
|
*
|
|
******************************************************************************/
|
|
|
|
/******************************************************************************
|
|
*
|
|
* (C)Copyright 1998-2002 SysKonnect GmbH.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* The information in this file is provided "AS IS" without warranty.
|
|
*
|
|
******************************************************************************/
|
|
|
|
/******************************************************************************
|
|
*
|
|
* History:
|
|
*
|
|
* $Log: sklm80.c,v $
|
|
* Revision 1.20 2002/08/13 09:16:27 rschmidt
|
|
* Changed return value for SkLm80ReadSensor() back to 'int'
|
|
* Editorial changes
|
|
*
|
|
* Revision 1.19 2002/08/06 09:43:31 jschmalz
|
|
* Extensions and changes for Yukon
|
|
*
|
|
* Revision 1.18 2002/08/02 12:26:57 rschmidt
|
|
* Editorial changes
|
|
*
|
|
* Revision 1.17 1999/11/22 13:35:51 cgoos
|
|
* Changed license header to GPL.
|
|
*
|
|
* Revision 1.16 1999/05/27 14:05:47 malthoff
|
|
* Fans: Set SenVal to 0 if the fan value is 0 or 0xff. Both values
|
|
* are outside the limits (0: div zero error, 0xff: value not in
|
|
* range, assume 0).
|
|
*
|
|
* Revision 1.15 1999/05/27 13:38:51 malthoff
|
|
* Pervent from Division by zero errors.
|
|
*
|
|
* Revision 1.14 1999/05/20 09:20:01 cgoos
|
|
* Changes for 1000Base-T (Fan sensors).
|
|
*
|
|
* Revision 1.13 1998/10/22 09:48:14 gklug
|
|
* fix: SysKonnectFileId typo
|
|
*
|
|
* Revision 1.12 1998/10/09 06:12:06 malthoff
|
|
* Remove ID_sccs by SysKonnectFileId.
|
|
*
|
|
* Revision 1.11 1998/09/04 08:33:48 malthoff
|
|
* bug fix: SenState = SK_SEN_IDLE when
|
|
* leaving SK_SEN_VALEXT state
|
|
*
|
|
* Revision 1.10 1998/08/20 12:02:10 gklug
|
|
* fix: compiler warnings type mismatch
|
|
*
|
|
* Revision 1.9 1998/08/20 11:37:38 gklug
|
|
* chg: change Ioc to IoC
|
|
*
|
|
* Revision 1.8 1998/08/19 12:20:58 gklug
|
|
* fix: remove struct from C files (see CCC)
|
|
*
|
|
* Revision 1.7 1998/08/17 07:04:57 malthoff
|
|
* Take SkLm80RcvReg() function from ski2c.c.
|
|
* Add IoC parameter to BREAK_OR_WAIT() macro.
|
|
*
|
|
* Revision 1.6 1998/08/14 07:11:28 malthoff
|
|
* remove pAc with pAC.
|
|
*
|
|
* Revision 1.5 1998/08/14 06:46:55 gklug
|
|
* fix: temperature can get negative
|
|
*
|
|
* Revision 1.4 1998/08/13 08:27:04 gklug
|
|
* add: temperature reading now o.k.
|
|
* fix: pSen declaration, SK_ERR_LOG call, ADDR macro
|
|
*
|
|
* Revision 1.3 1998/08/13 07:28:21 gklug
|
|
* fix: pSen was wrong initialized
|
|
* add: correct conversion for voltage readings
|
|
*
|
|
* Revision 1.2 1998/08/11 07:52:14 gklug
|
|
* add: Lm80 read sensor function
|
|
*
|
|
* Revision 1.1 1998/07/17 09:57:12 gklug
|
|
* initial version
|
|
*
|
|
*
|
|
*
|
|
******************************************************************************/
|
|
|
|
|
|
#include <config.h>
|
|
|
|
#ifdef CONFIG_SK98
|
|
|
|
/*
|
|
LM80 functions
|
|
*/
|
|
static const char SysKonnectFileId[] =
|
|
"$Id: sklm80.c,v 1.20 2002/08/13 09:16:27 rschmidt Exp $" ;
|
|
|
|
#include "h/skdrv1st.h" /* Driver Specific Definitions */
|
|
#include "h/lm80.h"
|
|
#include "h/skdrv2nd.h" /* Adapter Control- and Driver specific Def. */
|
|
|
|
#ifdef SK_DIAG
|
|
#define BREAK_OR_WAIT(pAC,IoC,Event) SkI2cWait(pAC,IoC,Event)
|
|
#else /* nSK_DIAG */
|
|
#define BREAK_OR_WAIT(pAC,IoC,Event) break
|
|
#endif /* nSK_DIAG */
|
|
|
|
#ifdef SK_DIAG
|
|
/*
|
|
* read the register 'Reg' from the device 'Dev'
|
|
*
|
|
* return read error -1
|
|
* success the read value
|
|
*/
|
|
int SkLm80RcvReg(
|
|
SK_IOC IoC, /* Adapter Context */
|
|
int Dev, /* I2C device address */
|
|
int Reg) /* register to read */
|
|
{
|
|
int Val = 0;
|
|
int TempExt;
|
|
|
|
/* Signal device number */
|
|
if (SkI2cSndDev(IoC, Dev, I2C_WRITE)) {
|
|
return(-1);
|
|
}
|
|
|
|
if (SkI2cSndByte(IoC, Reg)) {
|
|
return(-1);
|
|
}
|
|
|
|
/* repeat start */
|
|
if (SkI2cSndDev(IoC, Dev, I2C_READ)) {
|
|
return(-1);
|
|
}
|
|
|
|
switch (Reg) {
|
|
case LM80_TEMP_IN:
|
|
Val = (int)SkI2cRcvByte(IoC, 1);
|
|
|
|
/* First: correct the value: it might be negative */
|
|
if ((Val & 0x80) != 0) {
|
|
/* Value is negative */
|
|
Val = Val - 256;
|
|
}
|
|
Val = Val * SK_LM80_TEMP_LSB;
|
|
SkI2cStop(IoC);
|
|
|
|
TempExt = (int)SkLm80RcvReg(IoC, LM80_ADDR, LM80_TEMP_CTRL);
|
|
|
|
if (Val > 0) {
|
|
Val += ((TempExt >> 7) * SK_LM80_TEMPEXT_LSB);
|
|
}
|
|
else {
|
|
Val -= ((TempExt >> 7) * SK_LM80_TEMPEXT_LSB);
|
|
}
|
|
return(Val);
|
|
break;
|
|
case LM80_VT0_IN:
|
|
case LM80_VT1_IN:
|
|
case LM80_VT2_IN:
|
|
case LM80_VT3_IN:
|
|
Val = (int)SkI2cRcvByte(IoC, 1) * SK_LM80_VT_LSB;
|
|
break;
|
|
|
|
default:
|
|
Val = (int)SkI2cRcvByte(IoC, 1);
|
|
break;
|
|
}
|
|
|
|
SkI2cStop(IoC);
|
|
return(Val);
|
|
}
|
|
#endif /* SK_DIAG */
|
|
|
|
/*
|
|
* read a sensors value (LM80 specific)
|
|
*
|
|
* This function reads a sensors value from the I2C sensor chip LM80.
|
|
* The sensor is defined by its index into the sensors database in the struct
|
|
* pAC points to.
|
|
*
|
|
* Returns 1 if the read is completed
|
|
* 0 if the read must be continued (I2C Bus still allocated)
|
|
*/
|
|
int SkLm80ReadSensor(
|
|
SK_AC *pAC, /* Adapter Context */
|
|
SK_IOC IoC, /* I/O Context needed in level 1 and 2 */
|
|
SK_SENSOR *pSen) /* Sensor to be read */
|
|
{
|
|
SK_I32 Value;
|
|
|
|
switch (pSen->SenState) {
|
|
case SK_SEN_IDLE:
|
|
/* Send address to ADDR register */
|
|
SK_I2C_CTL(IoC, I2C_READ, pSen->SenDev, pSen->SenReg, 0);
|
|
|
|
pSen->SenState = SK_SEN_VALUE ;
|
|
BREAK_OR_WAIT(pAC, IoC, I2C_READ);
|
|
|
|
case SK_SEN_VALUE:
|
|
/* Read value from data register */
|
|
SK_IN32(IoC, B2_I2C_DATA, ((SK_U32 *)&Value));
|
|
|
|
Value &= 0xff; /* only least significant byte is valid */
|
|
|
|
/* Do NOT check the Value against the thresholds */
|
|
/* Checking is done in the calling instance */
|
|
|
|
if (pSen->SenType == SK_SEN_VOLT) {
|
|
/* Voltage sensor */
|
|
pSen->SenValue = Value * SK_LM80_VT_LSB;
|
|
pSen->SenState = SK_SEN_IDLE ;
|
|
return(1);
|
|
}
|
|
|
|
if (pSen->SenType == SK_SEN_FAN) {
|
|
if (Value != 0 && Value != 0xff) {
|
|
/* Fan speed counter */
|
|
pSen->SenValue = SK_LM80_FAN_FAKTOR/Value;
|
|
}
|
|
else {
|
|
/* Indicate Fan error */
|
|
pSen->SenValue = 0;
|
|
}
|
|
pSen->SenState = SK_SEN_IDLE ;
|
|
return(1);
|
|
}
|
|
|
|
/* First: correct the value: it might be negative */
|
|
if ((Value & 0x80) != 0) {
|
|
/* Value is negative */
|
|
Value = Value - 256;
|
|
}
|
|
|
|
/* We have a temperature sensor and need to get the signed extension.
|
|
* For now we get the extension from the last reading, so in the normal
|
|
* case we won't see flickering temperatures.
|
|
*/
|
|
pSen->SenValue = (Value * SK_LM80_TEMP_LSB) +
|
|
(pSen->SenValue % SK_LM80_TEMP_LSB);
|
|
|
|
/* Send address to ADDR register */
|
|
SK_I2C_CTL(IoC, I2C_READ, pSen->SenDev, LM80_TEMP_CTRL, 0);
|
|
|
|
pSen->SenState = SK_SEN_VALEXT ;
|
|
BREAK_OR_WAIT(pAC, IoC, I2C_READ);
|
|
|
|
case SK_SEN_VALEXT:
|
|
/* Read value from data register */
|
|
SK_IN32(IoC, B2_I2C_DATA, ((SK_U32 *)&Value));
|
|
Value &= LM80_TEMP_LSB_9; /* only bit 7 is valid */
|
|
|
|
/* cut the LSB bit */
|
|
pSen->SenValue = ((pSen->SenValue / SK_LM80_TEMP_LSB) *
|
|
SK_LM80_TEMP_LSB);
|
|
|
|
if (pSen->SenValue < 0) {
|
|
/* Value negative: The bit value must be subtracted */
|
|
pSen->SenValue -= ((Value >> 7) * SK_LM80_TEMPEXT_LSB);
|
|
}
|
|
else {
|
|
/* Value positive: The bit value must be added */
|
|
pSen->SenValue += ((Value >> 7) * SK_LM80_TEMPEXT_LSB);
|
|
}
|
|
|
|
pSen->SenState = SK_SEN_IDLE ;
|
|
return(1);
|
|
|
|
default:
|
|
SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_I2C_E007, SKERR_I2C_E007MSG);
|
|
return(1);
|
|
}
|
|
|
|
/* Not completed */
|
|
return(0);
|
|
}
|
|
|
|
#endif /* CONFIG_SK98 */
|