mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-10 15:14:43 +00:00
312dd1c55c
Add support for reading label property from DT and set up bank name based on that. If label property is not present full device node name is used. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
376 lines
11 KiB
C
376 lines
11 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Xilinx Zynq GPIO device driver
|
|
*
|
|
* Copyright (C) 2015 DAVE Embedded Systems <devel@dave.eu>
|
|
*
|
|
* Most of code taken from linux kernel driver (linux/drivers/gpio/gpio-zynq.c)
|
|
* Copyright (C) 2009 - 2014 Xilinx, Inc.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/io.h>
|
|
#include <linux/errno.h>
|
|
#include <dm.h>
|
|
#include <fdtdec.h>
|
|
|
|
/* Maximum banks */
|
|
#define ZYNQ_GPIO_MAX_BANK 4
|
|
|
|
#define ZYNQ_GPIO_BANK0_NGPIO 32
|
|
#define ZYNQ_GPIO_BANK1_NGPIO 22
|
|
#define ZYNQ_GPIO_BANK2_NGPIO 32
|
|
#define ZYNQ_GPIO_BANK3_NGPIO 32
|
|
|
|
#define ZYNQ_GPIO_NR_GPIOS (ZYNQ_GPIO_BANK0_NGPIO + \
|
|
ZYNQ_GPIO_BANK1_NGPIO + \
|
|
ZYNQ_GPIO_BANK2_NGPIO + \
|
|
ZYNQ_GPIO_BANK3_NGPIO)
|
|
|
|
#define ZYNQMP_GPIO_MAX_BANK 6
|
|
|
|
#define ZYNQMP_GPIO_BANK0_NGPIO 26
|
|
#define ZYNQMP_GPIO_BANK1_NGPIO 26
|
|
#define ZYNQMP_GPIO_BANK2_NGPIO 26
|
|
#define ZYNQMP_GPIO_BANK3_NGPIO 32
|
|
#define ZYNQMP_GPIO_BANK4_NGPIO 32
|
|
#define ZYNQMP_GPIO_BANK5_NGPIO 32
|
|
|
|
#define ZYNQMP_GPIO_NR_GPIOS 174
|
|
|
|
#define ZYNQ_GPIO_BANK0_PIN_MIN(str) 0
|
|
#define ZYNQ_GPIO_BANK0_PIN_MAX(str) (ZYNQ_GPIO_BANK0_PIN_MIN(str) + \
|
|
ZYNQ##str##_GPIO_BANK0_NGPIO - 1)
|
|
#define ZYNQ_GPIO_BANK1_PIN_MIN(str) (ZYNQ_GPIO_BANK0_PIN_MAX(str) + 1)
|
|
#define ZYNQ_GPIO_BANK1_PIN_MAX(str) (ZYNQ_GPIO_BANK1_PIN_MIN(str) + \
|
|
ZYNQ##str##_GPIO_BANK1_NGPIO - 1)
|
|
#define ZYNQ_GPIO_BANK2_PIN_MIN(str) (ZYNQ_GPIO_BANK1_PIN_MAX(str) + 1)
|
|
#define ZYNQ_GPIO_BANK2_PIN_MAX(str) (ZYNQ_GPIO_BANK2_PIN_MIN(str) + \
|
|
ZYNQ##str##_GPIO_BANK2_NGPIO - 1)
|
|
#define ZYNQ_GPIO_BANK3_PIN_MIN(str) (ZYNQ_GPIO_BANK2_PIN_MAX(str) + 1)
|
|
#define ZYNQ_GPIO_BANK3_PIN_MAX(str) (ZYNQ_GPIO_BANK3_PIN_MIN(str) + \
|
|
ZYNQ##str##_GPIO_BANK3_NGPIO - 1)
|
|
#define ZYNQ_GPIO_BANK4_PIN_MIN(str) (ZYNQ_GPIO_BANK3_PIN_MAX(str) + 1)
|
|
#define ZYNQ_GPIO_BANK4_PIN_MAX(str) (ZYNQ_GPIO_BANK4_PIN_MIN(str) + \
|
|
ZYNQ##str##_GPIO_BANK4_NGPIO - 1)
|
|
#define ZYNQ_GPIO_BANK5_PIN_MIN(str) (ZYNQ_GPIO_BANK4_PIN_MAX(str) + 1)
|
|
#define ZYNQ_GPIO_BANK5_PIN_MAX(str) (ZYNQ_GPIO_BANK5_PIN_MIN(str) + \
|
|
ZYNQ##str##_GPIO_BANK5_NGPIO - 1)
|
|
|
|
/* Register offsets for the GPIO device */
|
|
/* LSW Mask & Data -WO */
|
|
#define ZYNQ_GPIO_DATA_LSW_OFFSET(BANK) (0x000 + (8 * BANK))
|
|
/* MSW Mask & Data -WO */
|
|
#define ZYNQ_GPIO_DATA_MSW_OFFSET(BANK) (0x004 + (8 * BANK))
|
|
/* Data Register-RW */
|
|
#define ZYNQ_GPIO_DATA_RO_OFFSET(BANK) (0x060 + (4 * BANK))
|
|
/* Direction mode reg-RW */
|
|
#define ZYNQ_GPIO_DIRM_OFFSET(BANK) (0x204 + (0x40 * BANK))
|
|
/* Output enable reg-RW */
|
|
#define ZYNQ_GPIO_OUTEN_OFFSET(BANK) (0x208 + (0x40 * BANK))
|
|
/* Interrupt mask reg-RO */
|
|
#define ZYNQ_GPIO_INTMASK_OFFSET(BANK) (0x20C + (0x40 * BANK))
|
|
/* Interrupt enable reg-WO */
|
|
#define ZYNQ_GPIO_INTEN_OFFSET(BANK) (0x210 + (0x40 * BANK))
|
|
/* Interrupt disable reg-WO */
|
|
#define ZYNQ_GPIO_INTDIS_OFFSET(BANK) (0x214 + (0x40 * BANK))
|
|
/* Interrupt status reg-RO */
|
|
#define ZYNQ_GPIO_INTSTS_OFFSET(BANK) (0x218 + (0x40 * BANK))
|
|
/* Interrupt type reg-RW */
|
|
#define ZYNQ_GPIO_INTTYPE_OFFSET(BANK) (0x21C + (0x40 * BANK))
|
|
/* Interrupt polarity reg-RW */
|
|
#define ZYNQ_GPIO_INTPOL_OFFSET(BANK) (0x220 + (0x40 * BANK))
|
|
/* Interrupt on any, reg-RW */
|
|
#define ZYNQ_GPIO_INTANY_OFFSET(BANK) (0x224 + (0x40 * BANK))
|
|
|
|
/* Disable all interrupts mask */
|
|
#define ZYNQ_GPIO_IXR_DISABLE_ALL 0xFFFFFFFF
|
|
|
|
/* Mid pin number of a bank */
|
|
#define ZYNQ_GPIO_MID_PIN_NUM 16
|
|
|
|
/* GPIO upper 16 bit mask */
|
|
#define ZYNQ_GPIO_UPPER_MASK 0xFFFF0000
|
|
|
|
struct zynq_gpio_platdata {
|
|
phys_addr_t base;
|
|
const struct zynq_platform_data *p_data;
|
|
};
|
|
|
|
/**
|
|
* struct zynq_platform_data - zynq gpio platform data structure
|
|
* @label: string to store in gpio->label
|
|
* @ngpio: max number of gpio pins
|
|
* @max_bank: maximum number of gpio banks
|
|
* @bank_min: this array represents bank's min pin
|
|
* @bank_max: this array represents bank's max pin
|
|
*/
|
|
struct zynq_platform_data {
|
|
const char *label;
|
|
u16 ngpio;
|
|
u32 max_bank;
|
|
u32 bank_min[ZYNQMP_GPIO_MAX_BANK];
|
|
u32 bank_max[ZYNQMP_GPIO_MAX_BANK];
|
|
};
|
|
|
|
static const struct zynq_platform_data zynqmp_gpio_def = {
|
|
.label = "zynqmp_gpio",
|
|
.ngpio = ZYNQMP_GPIO_NR_GPIOS,
|
|
.max_bank = ZYNQMP_GPIO_MAX_BANK,
|
|
.bank_min[0] = ZYNQ_GPIO_BANK0_PIN_MIN(MP),
|
|
.bank_max[0] = ZYNQ_GPIO_BANK0_PIN_MAX(MP),
|
|
.bank_min[1] = ZYNQ_GPIO_BANK1_PIN_MIN(MP),
|
|
.bank_max[1] = ZYNQ_GPIO_BANK1_PIN_MAX(MP),
|
|
.bank_min[2] = ZYNQ_GPIO_BANK2_PIN_MIN(MP),
|
|
.bank_max[2] = ZYNQ_GPIO_BANK2_PIN_MAX(MP),
|
|
.bank_min[3] = ZYNQ_GPIO_BANK3_PIN_MIN(MP),
|
|
.bank_max[3] = ZYNQ_GPIO_BANK3_PIN_MAX(MP),
|
|
.bank_min[4] = ZYNQ_GPIO_BANK4_PIN_MIN(MP),
|
|
.bank_max[4] = ZYNQ_GPIO_BANK4_PIN_MAX(MP),
|
|
.bank_min[5] = ZYNQ_GPIO_BANK5_PIN_MIN(MP),
|
|
.bank_max[5] = ZYNQ_GPIO_BANK5_PIN_MAX(MP),
|
|
};
|
|
|
|
static const struct zynq_platform_data zynq_gpio_def = {
|
|
.label = "zynq_gpio",
|
|
.ngpio = ZYNQ_GPIO_NR_GPIOS,
|
|
.max_bank = ZYNQ_GPIO_MAX_BANK,
|
|
.bank_min[0] = ZYNQ_GPIO_BANK0_PIN_MIN(),
|
|
.bank_max[0] = ZYNQ_GPIO_BANK0_PIN_MAX(),
|
|
.bank_min[1] = ZYNQ_GPIO_BANK1_PIN_MIN(),
|
|
.bank_max[1] = ZYNQ_GPIO_BANK1_PIN_MAX(),
|
|
.bank_min[2] = ZYNQ_GPIO_BANK2_PIN_MIN(),
|
|
.bank_max[2] = ZYNQ_GPIO_BANK2_PIN_MAX(),
|
|
.bank_min[3] = ZYNQ_GPIO_BANK3_PIN_MIN(),
|
|
.bank_max[3] = ZYNQ_GPIO_BANK3_PIN_MAX(),
|
|
};
|
|
|
|
/**
|
|
* zynq_gpio_get_bank_pin - Get the bank number and pin number within that bank
|
|
* for a given pin in the GPIO device
|
|
* @pin_num: gpio pin number within the device
|
|
* @bank_num: an output parameter used to return the bank number of the gpio
|
|
* pin
|
|
* @bank_pin_num: an output parameter used to return pin number within a bank
|
|
* for the given gpio pin
|
|
*
|
|
* Returns the bank number and pin offset within the bank.
|
|
*/
|
|
static inline void zynq_gpio_get_bank_pin(unsigned int pin_num,
|
|
unsigned int *bank_num,
|
|
unsigned int *bank_pin_num,
|
|
struct udevice *dev)
|
|
{
|
|
struct zynq_gpio_platdata *platdata = dev_get_platdata(dev);
|
|
u32 bank;
|
|
|
|
for (bank = 0; bank < platdata->p_data->max_bank; bank++) {
|
|
if (pin_num >= platdata->p_data->bank_min[bank] &&
|
|
pin_num <= platdata->p_data->bank_max[bank]) {
|
|
*bank_num = bank;
|
|
*bank_pin_num = pin_num -
|
|
platdata->p_data->bank_min[bank];
|
|
return;
|
|
}
|
|
}
|
|
|
|
if (bank >= platdata->p_data->max_bank) {
|
|
printf("Invalid bank and pin num\n");
|
|
*bank_num = 0;
|
|
*bank_pin_num = 0;
|
|
}
|
|
}
|
|
|
|
static int gpio_is_valid(unsigned gpio, struct udevice *dev)
|
|
{
|
|
struct zynq_gpio_platdata *platdata = dev_get_platdata(dev);
|
|
|
|
return gpio < platdata->p_data->ngpio;
|
|
}
|
|
|
|
static int check_gpio(unsigned gpio, struct udevice *dev)
|
|
{
|
|
if (!gpio_is_valid(gpio, dev)) {
|
|
printf("ERROR : check_gpio: invalid GPIO %d\n", gpio);
|
|
return -1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int zynq_gpio_get_value(struct udevice *dev, unsigned gpio)
|
|
{
|
|
u32 data;
|
|
unsigned int bank_num, bank_pin_num;
|
|
struct zynq_gpio_platdata *platdata = dev_get_platdata(dev);
|
|
|
|
if (check_gpio(gpio, dev) < 0)
|
|
return -1;
|
|
|
|
zynq_gpio_get_bank_pin(gpio, &bank_num, &bank_pin_num, dev);
|
|
|
|
data = readl(platdata->base +
|
|
ZYNQ_GPIO_DATA_RO_OFFSET(bank_num));
|
|
|
|
return (data >> bank_pin_num) & 1;
|
|
}
|
|
|
|
static int zynq_gpio_set_value(struct udevice *dev, unsigned gpio, int value)
|
|
{
|
|
unsigned int reg_offset, bank_num, bank_pin_num;
|
|
struct zynq_gpio_platdata *platdata = dev_get_platdata(dev);
|
|
|
|
if (check_gpio(gpio, dev) < 0)
|
|
return -1;
|
|
|
|
zynq_gpio_get_bank_pin(gpio, &bank_num, &bank_pin_num, dev);
|
|
|
|
if (bank_pin_num >= ZYNQ_GPIO_MID_PIN_NUM) {
|
|
/* only 16 data bits in bit maskable reg */
|
|
bank_pin_num -= ZYNQ_GPIO_MID_PIN_NUM;
|
|
reg_offset = ZYNQ_GPIO_DATA_MSW_OFFSET(bank_num);
|
|
} else {
|
|
reg_offset = ZYNQ_GPIO_DATA_LSW_OFFSET(bank_num);
|
|
}
|
|
|
|
/*
|
|
* get the 32 bit value to be written to the mask/data register where
|
|
* the upper 16 bits is the mask and lower 16 bits is the data
|
|
*/
|
|
value = !!value;
|
|
value = ~(1 << (bank_pin_num + ZYNQ_GPIO_MID_PIN_NUM)) &
|
|
((value << bank_pin_num) | ZYNQ_GPIO_UPPER_MASK);
|
|
|
|
writel(value, platdata->base + reg_offset);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int zynq_gpio_direction_input(struct udevice *dev, unsigned gpio)
|
|
{
|
|
u32 reg;
|
|
unsigned int bank_num, bank_pin_num;
|
|
struct zynq_gpio_platdata *platdata = dev_get_platdata(dev);
|
|
|
|
if (check_gpio(gpio, dev) < 0)
|
|
return -1;
|
|
|
|
zynq_gpio_get_bank_pin(gpio, &bank_num, &bank_pin_num, dev);
|
|
|
|
/* bank 0 pins 7 and 8 are special and cannot be used as inputs */
|
|
if (bank_num == 0 && (bank_pin_num == 7 || bank_pin_num == 8))
|
|
return -1;
|
|
|
|
/* clear the bit in direction mode reg to set the pin as input */
|
|
reg = readl(platdata->base + ZYNQ_GPIO_DIRM_OFFSET(bank_num));
|
|
reg &= ~BIT(bank_pin_num);
|
|
writel(reg, platdata->base + ZYNQ_GPIO_DIRM_OFFSET(bank_num));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int zynq_gpio_direction_output(struct udevice *dev, unsigned gpio,
|
|
int value)
|
|
{
|
|
u32 reg;
|
|
unsigned int bank_num, bank_pin_num;
|
|
struct zynq_gpio_platdata *platdata = dev_get_platdata(dev);
|
|
|
|
if (check_gpio(gpio, dev) < 0)
|
|
return -1;
|
|
|
|
zynq_gpio_get_bank_pin(gpio, &bank_num, &bank_pin_num, dev);
|
|
|
|
/* set the GPIO pin as output */
|
|
reg = readl(platdata->base + ZYNQ_GPIO_DIRM_OFFSET(bank_num));
|
|
reg |= BIT(bank_pin_num);
|
|
writel(reg, platdata->base + ZYNQ_GPIO_DIRM_OFFSET(bank_num));
|
|
|
|
/* configure the output enable reg for the pin */
|
|
reg = readl(platdata->base + ZYNQ_GPIO_OUTEN_OFFSET(bank_num));
|
|
reg |= BIT(bank_pin_num);
|
|
writel(reg, platdata->base + ZYNQ_GPIO_OUTEN_OFFSET(bank_num));
|
|
|
|
/* set the state of the pin */
|
|
gpio_set_value(gpio, value);
|
|
return 0;
|
|
}
|
|
|
|
static int zynq_gpio_get_function(struct udevice *dev, unsigned offset)
|
|
{
|
|
u32 reg;
|
|
unsigned int bank_num, bank_pin_num;
|
|
struct zynq_gpio_platdata *platdata = dev_get_platdata(dev);
|
|
|
|
if (check_gpio(offset, dev) < 0)
|
|
return -1;
|
|
|
|
zynq_gpio_get_bank_pin(offset, &bank_num, &bank_pin_num, dev);
|
|
|
|
/* set the GPIO pin as output */
|
|
reg = readl(platdata->base + ZYNQ_GPIO_DIRM_OFFSET(bank_num));
|
|
reg &= BIT(bank_pin_num);
|
|
if (reg)
|
|
return GPIOF_OUTPUT;
|
|
else
|
|
return GPIOF_INPUT;
|
|
}
|
|
|
|
static const struct dm_gpio_ops gpio_zynq_ops = {
|
|
.direction_input = zynq_gpio_direction_input,
|
|
.direction_output = zynq_gpio_direction_output,
|
|
.get_value = zynq_gpio_get_value,
|
|
.set_value = zynq_gpio_set_value,
|
|
.get_function = zynq_gpio_get_function,
|
|
};
|
|
|
|
static const struct udevice_id zynq_gpio_ids[] = {
|
|
{ .compatible = "xlnx,zynq-gpio-1.0",
|
|
.data = (ulong)&zynq_gpio_def},
|
|
{ .compatible = "xlnx,zynqmp-gpio-1.0",
|
|
.data = (ulong)&zynqmp_gpio_def},
|
|
{ }
|
|
};
|
|
|
|
static int zynq_gpio_probe(struct udevice *dev)
|
|
{
|
|
struct zynq_gpio_platdata *platdata = dev_get_platdata(dev);
|
|
struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
|
|
const void *label_ptr;
|
|
|
|
label_ptr = dev_read_prop(dev, "label", NULL);
|
|
if (label_ptr) {
|
|
uc_priv->bank_name = strdup(label_ptr);
|
|
if (!uc_priv->bank_name)
|
|
return -ENOMEM;
|
|
} else {
|
|
uc_priv->bank_name = dev->name;
|
|
}
|
|
|
|
if (platdata->p_data)
|
|
uc_priv->gpio_count = platdata->p_data->ngpio;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int zynq_gpio_ofdata_to_platdata(struct udevice *dev)
|
|
{
|
|
struct zynq_gpio_platdata *platdata = dev_get_platdata(dev);
|
|
|
|
platdata->base = (phys_addr_t)dev_read_addr(dev);
|
|
|
|
platdata->p_data =
|
|
(struct zynq_platform_data *)dev_get_driver_data(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
U_BOOT_DRIVER(gpio_zynq) = {
|
|
.name = "gpio_zynq",
|
|
.id = UCLASS_GPIO,
|
|
.ops = &gpio_zynq_ops,
|
|
.of_match = zynq_gpio_ids,
|
|
.ofdata_to_platdata = zynq_gpio_ofdata_to_platdata,
|
|
.probe = zynq_gpio_probe,
|
|
.platdata_auto_alloc_size = sizeof(struct zynq_gpio_platdata),
|
|
};
|