mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-16 01:38:22 +00:00
c05ed00afb
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
206 lines
5.6 KiB
C
206 lines
5.6 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* (C) Copyright 2018 Rockchip Electronics Co., Ltd.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <ram.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch-rockchip/sdram.h>
|
|
#include <asm/arch-rockchip/sdram_common.h>
|
|
#include <asm/arch-rockchip/sdram_phy_px30.h>
|
|
#include <linux/delay.h>
|
|
|
|
static void sdram_phy_dll_bypass_set(void __iomem *phy_base, u32 freq)
|
|
{
|
|
u32 tmp;
|
|
u32 i, j;
|
|
u32 dqs_dll_freq;
|
|
|
|
setbits_le32(PHY_REG(phy_base, 0x13), 1 << 4);
|
|
clrbits_le32(PHY_REG(phy_base, 0x14), 1 << 3);
|
|
for (i = 0; i < 4; i++) {
|
|
j = 0x26 + i * 0x10;
|
|
setbits_le32(PHY_REG(phy_base, j), 1 << 4);
|
|
clrbits_le32(PHY_REG(phy_base, j + 0x1), 1 << 3);
|
|
}
|
|
|
|
if (freq <= 400)
|
|
/* DLL bypass */
|
|
setbits_le32(PHY_REG(phy_base, 0xa4), 0x1f);
|
|
else
|
|
clrbits_le32(PHY_REG(phy_base, 0xa4), 0x1f);
|
|
|
|
#ifdef CONFIG_ROCKCHIP_RK3328
|
|
dqs_dll_freq = 680;
|
|
#else
|
|
dqs_dll_freq = 801;
|
|
#endif
|
|
|
|
if (freq <= dqs_dll_freq)
|
|
tmp = 2;
|
|
else
|
|
tmp = 1;
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
j = 0x28 + i * 0x10;
|
|
writel(tmp, PHY_REG(phy_base, j));
|
|
}
|
|
}
|
|
|
|
static void sdram_phy_set_ds_odt(void __iomem *phy_base,
|
|
u32 dram_type)
|
|
{
|
|
u32 cmd_drv, clk_drv, dqs_drv, dqs_odt;
|
|
u32 i, j;
|
|
|
|
if (dram_type == DDR3) {
|
|
cmd_drv = PHY_DDR3_RON_RTT_34ohm;
|
|
clk_drv = PHY_DDR3_RON_RTT_45ohm;
|
|
dqs_drv = PHY_DDR3_RON_RTT_34ohm;
|
|
dqs_odt = PHY_DDR3_RON_RTT_225ohm;
|
|
} else {
|
|
cmd_drv = PHY_DDR4_LPDDR3_RON_RTT_34ohm;
|
|
clk_drv = PHY_DDR4_LPDDR3_RON_RTT_43ohm;
|
|
dqs_drv = PHY_DDR4_LPDDR3_RON_RTT_34ohm;
|
|
if (dram_type == LPDDR2)
|
|
dqs_odt = PHY_DDR4_LPDDR3_RON_RTT_DISABLE;
|
|
else
|
|
dqs_odt = PHY_DDR4_LPDDR3_RON_RTT_240ohm;
|
|
}
|
|
/* DS */
|
|
writel(cmd_drv, PHY_REG(phy_base, 0x11));
|
|
clrsetbits_le32(PHY_REG(phy_base, 0x12), 0x1f << 3, cmd_drv << 3);
|
|
writel(clk_drv, PHY_REG(phy_base, 0x16));
|
|
writel(clk_drv, PHY_REG(phy_base, 0x18));
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
j = 0x20 + i * 0x10;
|
|
writel(dqs_drv, PHY_REG(phy_base, j));
|
|
writel(dqs_drv, PHY_REG(phy_base, j + 0xf));
|
|
/* ODT */
|
|
writel(dqs_odt, PHY_REG(phy_base, j + 0x1));
|
|
writel(dqs_odt, PHY_REG(phy_base, j + 0xe));
|
|
}
|
|
}
|
|
|
|
void phy_soft_reset(void __iomem *phy_base)
|
|
{
|
|
clrbits_le32(PHY_REG(phy_base, 0), 0x3 << 2);
|
|
udelay(1);
|
|
setbits_le32(PHY_REG(phy_base, 0), ANALOG_DERESET);
|
|
udelay(5);
|
|
setbits_le32(PHY_REG(phy_base, 0), DIGITAL_DERESET);
|
|
udelay(1);
|
|
}
|
|
|
|
void phy_dram_set_bw(void __iomem *phy_base, u32 bw)
|
|
{
|
|
if (bw == 2) {
|
|
clrsetbits_le32(PHY_REG(phy_base, 0), 0xf << 4, 0xf << 4);
|
|
setbits_le32(PHY_REG(phy_base, 0x46), 1 << 3);
|
|
setbits_le32(PHY_REG(phy_base, 0x56), 1 << 3);
|
|
} else if (bw == 1) {
|
|
clrsetbits_le32(PHY_REG(phy_base, 0), 0xf << 4, 3 << 4);
|
|
clrbits_le32(PHY_REG(phy_base, 0x46), 1 << 3);
|
|
clrbits_le32(PHY_REG(phy_base, 0x56), 1 << 3);
|
|
} else if (bw == 0) {
|
|
clrsetbits_le32(PHY_REG(phy_base, 0), 0xf << 4, 1 << 4);
|
|
clrbits_le32(PHY_REG(phy_base, 0x36), 1 << 3);
|
|
clrbits_le32(PHY_REG(phy_base, 0x46), 1 << 3);
|
|
clrbits_le32(PHY_REG(phy_base, 0x56), 1 << 3);
|
|
}
|
|
|
|
phy_soft_reset(phy_base);
|
|
}
|
|
|
|
int phy_data_training(void __iomem *phy_base, u32 cs, u32 dramtype)
|
|
{
|
|
u32 ret;
|
|
u32 odt_val;
|
|
u32 i, j;
|
|
|
|
odt_val = readl(PHY_REG(phy_base, 0x2e));
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
j = 0x20 + i * 0x10;
|
|
writel(PHY_DDR3_RON_RTT_225ohm, PHY_REG(phy_base, j + 0x1));
|
|
writel(0, PHY_REG(phy_base, j + 0xe));
|
|
}
|
|
|
|
if (dramtype == DDR4) {
|
|
clrsetbits_le32(PHY_REG(phy_base, 0x29), 0x3, 0);
|
|
clrsetbits_le32(PHY_REG(phy_base, 0x39), 0x3, 0);
|
|
clrsetbits_le32(PHY_REG(phy_base, 0x49), 0x3, 0);
|
|
clrsetbits_le32(PHY_REG(phy_base, 0x59), 0x3, 0);
|
|
}
|
|
/* choose training cs */
|
|
clrsetbits_le32(PHY_REG(phy_base, 2), 0x33, (0x20 >> cs));
|
|
/* enable gate training */
|
|
clrsetbits_le32(PHY_REG(phy_base, 2), 0x33, (0x20 >> cs) | 1);
|
|
udelay(50);
|
|
ret = readl(PHY_REG(phy_base, 0xff));
|
|
/* disable gate training */
|
|
clrsetbits_le32(PHY_REG(phy_base, 2), 0x33, (0x20 >> cs) | 0);
|
|
#ifndef CONFIG_ROCKCHIP_RK3328
|
|
clrbits_le32(PHY_REG(phy_base, 2), 0x30);
|
|
#endif
|
|
|
|
if (dramtype == DDR4) {
|
|
clrsetbits_le32(PHY_REG(phy_base, 0x29), 0x3, 0x2);
|
|
clrsetbits_le32(PHY_REG(phy_base, 0x39), 0x3, 0x2);
|
|
clrsetbits_le32(PHY_REG(phy_base, 0x49), 0x3, 0x2);
|
|
clrsetbits_le32(PHY_REG(phy_base, 0x59), 0x3, 0x2);
|
|
}
|
|
|
|
if (ret & 0x10) {
|
|
ret = -1;
|
|
} else {
|
|
ret = (ret & 0xf) ^ (readl(PHY_REG(phy_base, 0)) >> 4);
|
|
ret = (ret == 0) ? 0 : -1;
|
|
}
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
j = 0x20 + i * 0x10;
|
|
writel(odt_val, PHY_REG(phy_base, j + 0x1));
|
|
writel(odt_val, PHY_REG(phy_base, j + 0xe));
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
void phy_cfg(void __iomem *phy_base,
|
|
struct ddr_phy_regs *phy_regs, struct ddr_phy_skew *skew,
|
|
struct sdram_base_params *base, u32 bw)
|
|
{
|
|
u32 i;
|
|
|
|
sdram_phy_dll_bypass_set(phy_base, base->ddr_freq);
|
|
for (i = 0; phy_regs->phy[i][0] != 0xFFFFFFFF; i++) {
|
|
writel(phy_regs->phy[i][1],
|
|
phy_base + phy_regs->phy[i][0]);
|
|
}
|
|
if (bw == 2) {
|
|
clrsetbits_le32(PHY_REG(phy_base, 0), 0xf << 4, 0xf << 4);
|
|
} else if (bw == 1) {
|
|
clrsetbits_le32(PHY_REG(phy_base, 0), 0xf << 4, 3 << 4);
|
|
/* disable DQS2,DQS3 tx dll for saving power */
|
|
clrbits_le32(PHY_REG(phy_base, 0x46), 1 << 3);
|
|
clrbits_le32(PHY_REG(phy_base, 0x56), 1 << 3);
|
|
} else {
|
|
clrsetbits_le32(PHY_REG(phy_base, 0), 0xf << 4, 1 << 4);
|
|
/* disable DQS2,DQS3 tx dll for saving power */
|
|
clrbits_le32(PHY_REG(phy_base, 0x36), 1 << 3);
|
|
clrbits_le32(PHY_REG(phy_base, 0x46), 1 << 3);
|
|
clrbits_le32(PHY_REG(phy_base, 0x56), 1 << 3);
|
|
}
|
|
sdram_phy_set_ds_odt(phy_base, base->dramtype);
|
|
|
|
/* deskew */
|
|
setbits_le32(PHY_REG(phy_base, 2), 8);
|
|
sdram_copy_to_reg(PHY_REG(phy_base, 0xb0),
|
|
&skew->a0_a1_skew[0], 15 * 4);
|
|
sdram_copy_to_reg(PHY_REG(phy_base, 0x70),
|
|
&skew->cs0_dm0_skew[0], 44 * 4);
|
|
sdram_copy_to_reg(PHY_REG(phy_base, 0xc0),
|
|
&skew->cs1_dm0_skew[0], 44 * 4);
|
|
}
|