mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 00:47:26 +00:00
57d2beb91d
U-Boot binary has grown in such a way that it goes beyond the reserved area for the environment variables. Running "saveenv" causes U-Boot to hang because of this overlap. Fix this problem by increasing the CONFIG_ENV_OFFSET size. Also, in order to prevent this same problem in the future, use CONFIG_BOARD_SIZE_LIMIT, which will detect the overlap in build-time. CONFIG_BOARD_SIZE_LIMIT does not accept math expressions, so declare CONFIG_ENV_OFFSET with its direct value instead. Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
163 lines
4.4 KiB
C
163 lines
4.4 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright (C) 2017 NXP Semiconductors
|
|
*
|
|
* Configuration settings for the i.MX7D Pico board.
|
|
*/
|
|
|
|
#ifndef __PICO_IMX7D_CONFIG_H
|
|
#define __PICO_IMX7D_CONFIG_H
|
|
|
|
#include "mx7_common.h"
|
|
|
|
#include "imx7_spl.h"
|
|
|
|
#ifdef CONFIG_SPL_OS_BOOT
|
|
/* Falcon Mode */
|
|
#define CONFIG_SPL_FS_LOAD_ARGS_NAME "args"
|
|
#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage"
|
|
#define CONFIG_SYS_SPL_ARGS_ADDR 0x88000000
|
|
|
|
/* Falcon Mode - MMC support: args@1MB kernel@2MB */
|
|
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x800 /* 1MB */
|
|
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512)
|
|
#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000 /* 2MB */
|
|
#endif
|
|
|
|
/* Size of malloc() pool */
|
|
#define CONFIG_SYS_MALLOC_LEN (32 * SZ_1M)
|
|
|
|
#define CONFIG_MXC_UART_BASE UART5_IPS_BASE_ADDR
|
|
|
|
/* Network */
|
|
#define CONFIG_FEC_MXC
|
|
#define CONFIG_FEC_XCV_TYPE RGMII
|
|
#define CONFIG_ETHPRIME "FEC"
|
|
#define CONFIG_FEC_MXC_PHYADDR 1
|
|
|
|
#define CONFIG_PHY_ATHEROS
|
|
|
|
/* ENET1 */
|
|
#define IMX_FEC_BASE ENET_IPS_BASE_ADDR
|
|
|
|
/* MMC Config */
|
|
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
|
|
|
|
#define CONFIG_DFU_ENV_SETTINGS \
|
|
"dfu_alt_info=" \
|
|
"spl raw 0x2 0x400;" \
|
|
"u-boot raw 0x8a 0x400;" \
|
|
"/boot/zImage ext4 0 1;" \
|
|
"/boot/imx7d-pico-hobbit.dtb ext4 0 1;" \
|
|
"/boot/imx7d-pico-pi.dtb ext4 0 1;" \
|
|
"rootfs part 0 1\0" \
|
|
|
|
#define BOOTMENU_ENV \
|
|
"bootmenu_0=Boot using PICO-Hobbit baseboard=" \
|
|
"setenv fdtfile imx7d-pico-hobbit.dtb\0" \
|
|
"bootmenu_1=Boot using PICO-Pi baseboard=" \
|
|
"setenv fdtfile imx7d-pico-pi.dtb\0" \
|
|
|
|
#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
|
|
#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"script=boot.scr\0" \
|
|
"image=zImage\0" \
|
|
"console=ttymxc4\0" \
|
|
"fdt_high=0xffffffff\0" \
|
|
"initrd_high=0xffffffff\0" \
|
|
"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
|
|
BOOTMENU_ENV \
|
|
"fdt_addr=0x83000000\0" \
|
|
"fdt_addr_r=0x83000000\0" \
|
|
"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
|
|
"pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
|
|
"ramdisk_addr_r=0x83000000\0" \
|
|
"ramdiskaddr=0x83000000\0" \
|
|
"scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
|
|
CONFIG_DFU_ENV_SETTINGS \
|
|
"findfdt=" \
|
|
"if test $fdtfile = ask ; then " \
|
|
"bootmenu -1; fi;" \
|
|
"if test $fdtfile != ask ; then " \
|
|
"saveenv; fi;\0" \
|
|
"finduuid=part uuid mmc 0:1 uuid\0" \
|
|
"partitions=" \
|
|
"uuid_disk=${uuid_gpt_disk};" \
|
|
"name=rootfs,size=0,uuid=${uuid_gpt_rootfs}\0" \
|
|
"fastboot_partition_alias_system=rootfs\0" \
|
|
"setup_emmc=mmc dev 0; gpt write mmc 0 $partitions; reset;\0" \
|
|
BOOTENV
|
|
|
|
#define BOOT_TARGET_DEVICES(func) \
|
|
func(MMC, mmc, 0) \
|
|
func(USB, usb, 0) \
|
|
func(PXE, pxe, na) \
|
|
func(DHCP, dhcp, na)
|
|
|
|
#include <config_distro_bootcmd.h>
|
|
|
|
#define CONFIG_SYS_MEMTEST_START 0x80000000
|
|
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x20000000)
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
|
|
#define CONFIG_SYS_HZ 1000
|
|
|
|
/* Physical Memory Map */
|
|
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
|
|
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
|
|
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
|
|
|
|
#define CONFIG_SYS_INIT_SP_OFFSET \
|
|
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_ADDR \
|
|
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
|
|
|
|
/* I2C configs */
|
|
#define CONFIG_SYS_I2C
|
|
#define CONFIG_SYS_I2C_MXC
|
|
#define CONFIG_SYS_I2C_MXC_I2C1
|
|
#define CONFIG_SYS_I2C_MXC_I2C2
|
|
#define CONFIG_SYS_I2C_MXC_I2C3
|
|
#define CONFIG_SYS_I2C_MXC_I2C4
|
|
#define CONFIG_SYS_I2C_SPEED 100000
|
|
|
|
/* PMIC */
|
|
#define CONFIG_POWER
|
|
#define CONFIG_POWER_I2C
|
|
#define CONFIG_POWER_PFUZE3000
|
|
#define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08
|
|
|
|
/* FLASH and environment organization */
|
|
#define CONFIG_ENV_SIZE SZ_8K
|
|
|
|
/* Environment starts at 768k = 768 * 1024 = 786432 */
|
|
#define CONFIG_ENV_OFFSET 786432
|
|
/*
|
|
* Detect overlap between U-Boot image and environment area in build-time
|
|
*
|
|
* CONFIG_BOARD_SIZE_LIMIT = CONFIG_ENV_OFFSET - u-boot.img offset
|
|
* CONFIG_BOARD_SIZE_LIMIT = 768k - 69k = 699k = 715776
|
|
*
|
|
* Currently CONFIG_BOARD_SIZE_LIMIT does not handle expressions, so
|
|
* write the direct value here
|
|
*/
|
|
#define CONFIG_BOARD_SIZE_LIMIT 715776
|
|
|
|
#define CONFIG_SYS_FSL_USDHC_NUM 2
|
|
|
|
#define CONFIG_SYS_MMC_ENV_DEV 0
|
|
#define CONFIG_SYS_MMC_ENV_PART 0
|
|
|
|
/* USB Configs */
|
|
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
|
|
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
|
|
#define CONFIG_MXC_USB_FLAGS 0
|
|
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
|
|
|
|
#define CONFIG_IMX_THERMAL
|
|
|
|
#endif
|