2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-14 07:13:03 +00:00
u-boot/arch/arm/dts/armada-7040-db.dts
Sven Auhagen 88426bd6b0 arm: mvebu: dts: Armada8k enable mdio
Since mvpp2 is using the new mdio driver and the cp110 has been
synced with the linux upstream, the mdio has to enabled in the
device tree file.
This is missing for some device tree files and therefore the
network cards do not come online.

Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-09-10 09:01:51 +02:00

206 lines
3.2 KiB
Text

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2016- 2021 Marvell International Ltd.
*/
/*
* Device Tree file for Marvell Armada 7040 Development board platform
* Boot device: SPI NOR, 0x32 (SW3)
*/
#include "armada-7040.dtsi"
/ {
model = "Marvell Armada 7040 DB board";
compatible = "marvell,armada7040-db", "marvell,armada7040",
"marvell,armada-ap806-quad", "marvell,armada-ap806";
chosen {
stdout-path = "serial0:115200n8";
};
aliases {
i2c0 = &cp0_i2c0;
spi0 = &cp0_spi1;
};
memory@00000000 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>;
};
};
&ap_pinctl {
/* MPP Bus:
* SDIO [0-5]
* UART0 [11,19]
*/
/* 0 1 2 3 4 5 6 7 8 9 */
pin-func = < 1 1 1 1 1 1 0 0 0 0
0 3 0 0 0 0 0 0 0 3 >;
};
&uart0 {
status = "okay";
};
&cp0_pcie2 {
status = "okay";
};
&cp0_i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&cp0_i2c0_pins>;
status = "okay";
clock-frequency = <100000>;
};
&cp0_pinctl {
/* MPP Bus:
* TDM [0-11]
* SPI [13-16]
* SATA1 [28]
* UART0 [29-30]
* SMI [32,34]
* XSMI [35-36]
* I2C [37-38]
* RGMII1[44-55]
* SD [56-62]
*/
/* 0 1 2 3 4 5 6 7 8 9 */
pin-func = < 4 4 4 4 4 4 4 4 4 4
4 4 0 3 3 3 3 0 0 0
0 0 0 0 0 0 0 0 9 0xA
0xA 0 7 0 7 7 7 2 2 0
0 0 0 0 1 1 1 1 1 1
1 1 1 1 1 1 0xE 0xE 0xE 0xE
0xE 0xE 0xE >;
};
&cp0_spi1 {
pinctrl-names = "default";
pinctrl-0 = <&cp0_spi0_pins>;
status = "okay";
spi-flash@0 {
#address-cells = <0x1>;
#size-cells = <0x1>;
compatible = "jedec,spi-nor";
reg = <0x0>;
spi-max-frequency = <20000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "U-Boot";
reg = <0x0 0x200000>;
};
partition@400000 {
label = "Filesystem";
reg = <0x200000 0xe00000>;
};
};
};
};
&cp0_sata0 {
status = "okay";
};
&cp0_usb3_0 {
status = "okay";
};
&cp0_usb3_1 {
status = "okay";
};
&cp0_comphy {
phy0 {
phy-type = <COMPHY_TYPE_SGMII1>;
phy-speed = <COMPHY_SPEED_1_25G>;
};
phy1 {
phy-type = <COMPHY_TYPE_USB3_HOST0>;
phy-speed = <COMPHY_SPEED_5G>;
};
phy2 {
phy-type = <COMPHY_TYPE_SFI0>;
phy-speed = <COMPHY_SPEED_10_3125G>;
};
phy3 {
phy-type = <COMPHY_TYPE_SATA1>;
phy-speed = <COMPHY_SPEED_5G>;
};
phy4 {
phy-type = <COMPHY_TYPE_USB3_HOST1>;
phy-speed = <COMPHY_SPEED_5G>;
};
phy5 {
phy-type = <COMPHY_TYPE_PEX2>;
phy-speed = <COMPHY_SPEED_5G>;
};
};
&cp0_utmi0 {
status = "okay";
};
&cp0_utmi1 {
status = "okay";
};
&ap_sdhci0 {
status = "okay";
bus-width = <4>;
no-1-8-v;
non-removable;
};
&cp0_sdhci0 {
status = "okay";
bus-width = <4>;
no-1-8-v;
non-removable;
};
&cp0_mdio {
status = "okay";
phy0: ethernet-phy@0 {
reg = <0>;
};
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&cp0_ethernet {
status = "okay";
};
&cp0_eth0 {
status = "okay";
phy-mode = "sfi"; /* lane-2 */
};
&cp0_eth1 {
status = "okay";
phy = <&phy0>;
phy-mode = "sgmii";
};
&cp0_eth2 {
status = "okay";
phy = <&phy1>;
phy-mode = "rgmii-id";
};