mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 17:07:38 +00:00
3d6ba91e79
CONFIG_STACKSIZE is not referenced anywhere except on AVR32, but present in most ARM board config files. IRQs are only enabled for 1 config, so remove the unused config options for IRQ and FIQ stack size as well. Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
232 lines
6.7 KiB
C
232 lines
6.7 KiB
C
/*
|
|
* Copyright (C) ST-Ericsson SA 2009
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/*
|
|
* High Level Configuration Options
|
|
* (easy to change)
|
|
*/
|
|
#define CONFIG_U8500
|
|
#define CONFIG_L2_OFF
|
|
|
|
#define CONFIG_SYS_MEMTEST_START 0x00000000
|
|
#define CONFIG_SYS_MEMTEST_END 0x1FFFFFFF
|
|
#define CONFIG_SYS_HZ 1000 /* must be 1000 */
|
|
|
|
#define CONFIG_BOARD_EARLY_INIT_F
|
|
#define CONFIG_BOARD_LATE_INIT
|
|
|
|
/*
|
|
* Size of malloc() pool
|
|
*/
|
|
#ifdef CONFIG_BOOT_SRAM
|
|
#define CONFIG_ENV_SIZE (32*1024)
|
|
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 64*1024)
|
|
#else
|
|
#define CONFIG_ENV_SIZE (128*1024)
|
|
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 256*1024)
|
|
#endif
|
|
#define CONFIG_SYS_GBL_DATA_SIZE 128 /* for initial data */
|
|
|
|
/*
|
|
* PL011 Configuration
|
|
*/
|
|
#define CONFIG_PL011_SERIAL
|
|
#define CONFIG_PL011_SERIAL_RLCR
|
|
#define CONFIG_PL011_SERIAL_FLUSH_ON_INIT
|
|
|
|
/*
|
|
* U8500 UART registers base for 3 serial devices
|
|
*/
|
|
#define CFG_UART0_BASE 0x80120000
|
|
#define CFG_UART1_BASE 0x80121000
|
|
#define CFG_UART2_BASE 0x80007000
|
|
#define CFG_SERIAL0 CFG_UART0_BASE
|
|
#define CFG_SERIAL1 CFG_UART1_BASE
|
|
#define CFG_SERIAL2 CFG_UART2_BASE
|
|
#define CONFIG_PL011_CLOCK 38400000
|
|
#define CONFIG_PL01x_PORTS { (void *)CFG_SERIAL0, (void *)CFG_SERIAL1, \
|
|
(void *)CFG_SERIAL2 }
|
|
#define CONFIG_CONS_INDEX 2
|
|
#define CONFIG_BAUDRATE 115200
|
|
|
|
/*
|
|
* Devices and file systems
|
|
*/
|
|
#define CONFIG_MMC
|
|
#define CONFIG_GENERIC_MMC
|
|
#define CONFIG_DOS_PARTITION
|
|
|
|
/*
|
|
* Commands
|
|
*/
|
|
#define CONFIG_CMD_MEMORY
|
|
#define CONFIG_CMD_BOOTD
|
|
#define CONFIG_CMD_BDI
|
|
#define CONFIG_CMD_IMI
|
|
#define CONFIG_CMD_MISC
|
|
#define CONFIG_CMD_RUN
|
|
#define CONFIG_CMD_ECHO
|
|
#define CONFIG_CMD_CONSOLE
|
|
#define CONFIG_CMD_LOADS
|
|
#define CONFIG_CMD_LOADB
|
|
#define CONFIG_CMD_MMC
|
|
#define CONFIG_CMD_FAT
|
|
#define CONFIG_CMD_EXT2
|
|
#define CONFIG_CMD_SOURCE
|
|
#define CONFIG_CMD_I2C
|
|
|
|
#ifndef CONFIG_BOOTDELAY
|
|
#define CONFIG_BOOTDELAY 1
|
|
#endif
|
|
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
|
|
|
|
#undef CONFIG_BOOTARGS
|
|
#define CONFIG_BOOTCOMMAND "run emmcboot"
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"verify=n\0" \
|
|
"loadaddr=0x00100000\0" \
|
|
"console=ttyAMA2,115200n8\0" \
|
|
"memargs256=mem=96M@0 mem_modem=32M@96M mem=30M@128M " \
|
|
"pmem=22M@158M pmem_hwb=44M@180M mem_mali=32@224M\0" \
|
|
"memargs512=mem=96M@0 mem_modem=32M@96M mem=44M@128M " \
|
|
"pmem=22M@172M mem=30M@194M mem_mali=32M@224M " \
|
|
"pmem_hwb=54M@256M mem=202M@310M\0" \
|
|
"commonargs=setenv bootargs cachepolicy=writealloc noinitrd " \
|
|
"init=init " \
|
|
"board_id=${board_id} " \
|
|
"logo.${logo} " \
|
|
"startup_graphics=${startup_graphics}\0" \
|
|
"emmcargs=setenv bootargs ${bootargs} " \
|
|
"root=/dev/mmcblk0p2 " \
|
|
"rootdelay=1\0" \
|
|
"addcons=setenv bootargs ${bootargs} " \
|
|
"console=${console}\0" \
|
|
"emmcboot=echo Booting from eMMC ...; " \
|
|
"run commonargs emmcargs addcons memargs;" \
|
|
"mmc read 0 ${loadaddr} 0xA0000 0x4000;" \
|
|
"bootm ${loadaddr}\0" \
|
|
"flash=mmc init 1;fatload mmc 1 ${loadaddr} flash.scr;" \
|
|
"source ${loadaddr}\0" \
|
|
"loaduimage=mmc init 1;fatload mmc 1 ${loadaddr} uImage\0" \
|
|
"usbtty=cdc_acm\0" \
|
|
"stdout=serial,usbtty\0" \
|
|
"stdin=serial,usbtty\0" \
|
|
"stderr=serial,usbtty\0"
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
|
|
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
|
#define CONFIG_SYS_PROMPT "U8500 $ " /* Monitor Command Prompt */
|
|
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
|
|
|
|
/* Print Buffer Size */
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
|
|
+ sizeof(CONFIG_SYS_PROMPT) + 16)
|
|
#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Arg Buffer Size */
|
|
|
|
#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
|
|
#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */
|
|
#define CONFIG_SYS_LOADS_BAUD_CHANGE
|
|
|
|
#define CONFIG_SYS_HUSH_PARSER
|
|
#define CONFIG_CMDLINE_EDITING
|
|
|
|
#define CONFIG_SETUP_MEMORY_TAGS 2
|
|
#define CONFIG_INITRD_TAG
|
|
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
|
|
|
|
/*
|
|
* I2C
|
|
*/
|
|
#define CONFIG_U8500_I2C
|
|
#undef CONFIG_HARD_I2C /* I2C with hardware support */
|
|
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
|
|
#define CONFIG_I2C_MULTI_BUS
|
|
#define CONFIG_SYS_I2C_SPEED 100000
|
|
#define CONFIG_SYS_I2C_SLAVE 0 /* slave addr of controller */
|
|
#define CONFIG_SYS_U8500_I2C0_BASE 0x80004000
|
|
#define CONFIG_SYS_U8500_I2C1_BASE 0x80122000
|
|
#define CONFIG_SYS_U8500_I2C2_BASE 0x80128000
|
|
#define CONFIG_SYS_U8500_I2C3_BASE 0x80110000
|
|
#define CONFIG_SYS_U8500_I2C_BUS_MAX 4
|
|
|
|
#define CONFIG_SYS_I2C_GPIOE_ADDR 0x42 /* GPIO expander chip addr */
|
|
#define CONFIG_TC35892_GPIO
|
|
|
|
/*
|
|
* Physical Memory Map
|
|
*/
|
|
#define CONFIG_NR_DRAM_BANKS 1
|
|
#define PHYS_SDRAM_1 0x00000000 /* DDR-SDRAM Bank #1 */
|
|
#define PHYS_SDRAM_SIZE_1 0x20000000 /* 512 MB */
|
|
|
|
/*
|
|
* additions for new relocation code
|
|
*/
|
|
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
|
|
#define CONFIG_SYS_INIT_RAM_SIZE 0x100000
|
|
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_BASE + \
|
|
CONFIG_SYS_INIT_RAM_SIZE - \
|
|
GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_GBL_DATA_OFFSET
|
|
|
|
/* landing address before relocation */
|
|
#ifndef CONFIG_SYS_TEXT_BASE
|
|
#define CONFIG_SYS_TEXT_BASE 0x0
|
|
#endif
|
|
|
|
/*
|
|
* MMC related configs
|
|
* NB Only externa SD slot is currently supported
|
|
*/
|
|
#define MMC_BLOCK_SIZE 512
|
|
#define CONFIG_ARM_PL180_MMCI
|
|
#define CONFIG_ARM_PL180_MMCI_BASE 0x80126000 /* MMC base for 8500 */
|
|
#define CONFIG_ARM_PL180_MMCI_CLOCK_FREQ 6250000
|
|
#define CONFIG_MMC_DEV_NUM 1
|
|
|
|
#define CONFIG_CMD_ENV
|
|
#define CONFIG_CMD_SAVEENV /* CMD_ENV is obsolete but used in env_emmc.c */
|
|
#define CONFIG_ENV_IS_IN_MMC
|
|
#define CONFIG_ENV_OFFSET 0x13F80000
|
|
#define CONFIG_SYS_MMC_ENV_DEV 0 /* SLOT2: eMMC */
|
|
|
|
/*
|
|
* FLASH and environment organization
|
|
*/
|
|
#define CONFIG_SYS_NO_FLASH
|
|
|
|
/*
|
|
* base register values for U8500
|
|
*/
|
|
#define CFG_PRCMU_BASE 0x80157000 /* Power, reset and clock
|
|
management unit */
|
|
#define CFG_FSMC_BASE 0x80000000 /* FSMC Controller */
|
|
|
|
#endif /* __CONFIG_H */
|