mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-12 14:23:00 +00:00
d107235a38
The Gateworks System Controller thermal protection feature will disable the board primary power supply if the on-board temperature sensor reaches 86C. In many cases this could occur before the temperature critical components such as CPU, DRAM, eMMC, and power supplies have reached their max temperature. Remove the forced re-enable of thermal protection so that users can knowingly disable it. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
678 lines
16 KiB
C
678 lines
16 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2021 Gateworks Corporation
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <hang.h>
|
|
#include <hexdump.h>
|
|
#include <i2c.h>
|
|
#include <linux/delay.h>
|
|
#include <dm/uclass.h>
|
|
|
|
#include "gsc.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
struct venice_board_info som_info;
|
|
struct venice_board_info base_info;
|
|
char venice_model[32];
|
|
|
|
/* return a mac address from EEPROM info */
|
|
int gsc_getmac(int index, uint8_t *address)
|
|
{
|
|
int i, j;
|
|
u32 maclow, machigh;
|
|
u64 mac;
|
|
|
|
j = 0;
|
|
if (som_info.macno) {
|
|
maclow = som_info.mac[5];
|
|
maclow |= som_info.mac[4] << 8;
|
|
maclow |= som_info.mac[3] << 16;
|
|
maclow |= som_info.mac[2] << 24;
|
|
machigh = som_info.mac[1];
|
|
machigh |= som_info.mac[0] << 8;
|
|
mac = machigh;
|
|
mac <<= 32;
|
|
mac |= maclow;
|
|
for (i = 0; i < som_info.macno; i++, j++) {
|
|
if (index == j)
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
maclow = base_info.mac[5];
|
|
maclow |= base_info.mac[4] << 8;
|
|
maclow |= base_info.mac[3] << 16;
|
|
maclow |= base_info.mac[2] << 24;
|
|
machigh = base_info.mac[1];
|
|
machigh |= base_info.mac[0] << 8;
|
|
mac = machigh;
|
|
mac <<= 32;
|
|
mac |= maclow;
|
|
for (i = 0; i < base_info.macno; i++, j++) {
|
|
if (index == j)
|
|
goto out;
|
|
}
|
|
|
|
return -EINVAL;
|
|
|
|
out:
|
|
mac += i;
|
|
address[0] = (mac >> 40) & 0xff;
|
|
address[1] = (mac >> 32) & 0xff;
|
|
address[2] = (mac >> 24) & 0xff;
|
|
address[3] = (mac >> 16) & 0xff;
|
|
address[4] = (mac >> 8) & 0xff;
|
|
address[5] = (mac >> 0) & 0xff;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* System Controller registers */
|
|
enum {
|
|
GSC_SC_CTRL0 = 0,
|
|
GSC_SC_CTRL1 = 1,
|
|
GSC_SC_STATUS = 10,
|
|
GSC_SC_FWCRC = 12,
|
|
GSC_SC_FWVER = 14,
|
|
GSC_SC_WP = 15,
|
|
GSC_SC_RST_CAUSE = 16,
|
|
GSC_SC_THERM_PROTECT = 19,
|
|
};
|
|
|
|
/* System Controller Control1 bits */
|
|
enum {
|
|
GSC_SC_CTRL1_WDTIME = 4, /* 1 = 60s timeout, 0 = 30s timeout */
|
|
GSC_SC_CTRL1_WDEN = 5, /* 1 = enable, 0 = disable */
|
|
GSC_SC_CTRL1_BOOT_CHK = 6, /* 1 = enable alt boot check */
|
|
GSC_SC_CTRL1_WDDIS = 7, /* 1 = disable boot watchdog */
|
|
};
|
|
|
|
/* System Controller Interrupt bits */
|
|
enum {
|
|
GSC_SC_IRQ_PB = 0, /* Pushbutton switch */
|
|
GSC_SC_IRQ_SECURE = 1, /* Secure Key erase operation complete */
|
|
GSC_SC_IRQ_EEPROM_WP = 2, /* EEPROM write violation */
|
|
GSC_SC_IRQ_GPIO = 4, /* GPIO change */
|
|
GSC_SC_IRQ_TAMPER = 5, /* Tamper detect */
|
|
GSC_SC_IRQ_WATCHDOG = 6, /* Watchdog trip */
|
|
GSC_SC_IRQ_PBLONG = 7, /* Pushbutton long hold */
|
|
};
|
|
|
|
/* System Controller WP bits */
|
|
enum {
|
|
GSC_SC_WP_ALL = 0, /* Write Protect All EEPROM regions */
|
|
GSC_SC_WP_BOARDINFO = 1, /* Write Protect Board Info region */
|
|
};
|
|
|
|
/* System Controller Reset Cause */
|
|
enum {
|
|
GSC_SC_RST_CAUSE_VIN = 0,
|
|
GSC_SC_RST_CAUSE_PB = 1,
|
|
GSC_SC_RST_CAUSE_WDT = 2,
|
|
GSC_SC_RST_CAUSE_CPU = 3,
|
|
GSC_SC_RST_CAUSE_TEMP_LOCAL = 4,
|
|
GSC_SC_RST_CAUSE_TEMP_REMOTE = 5,
|
|
GSC_SC_RST_CAUSE_SLEEP = 6,
|
|
GSC_SC_RST_CAUSE_BOOT_WDT = 7,
|
|
GSC_SC_RST_CAUSE_BOOT_WDT_MAN = 8,
|
|
GSC_SC_RST_CAUSE_SOFT_PWR = 9,
|
|
GSC_SC_RST_CAUSE_MAX = 10,
|
|
};
|
|
|
|
static struct udevice *gsc_get_dev(int busno, int slave)
|
|
{
|
|
static const char * const i2c[] = { "i2c@30a20000", "i2c@30a30000" };
|
|
struct udevice *dev, *bus;
|
|
int ret;
|
|
|
|
ret = uclass_get_device_by_name(UCLASS_I2C, i2c[busno - 1], &bus);
|
|
if (ret) {
|
|
printf("GSC : failed I2C%d probe: %d\n", busno, ret);
|
|
return NULL;
|
|
}
|
|
ret = dm_i2c_probe(bus, slave, 0, &dev);
|
|
if (ret)
|
|
return NULL;
|
|
|
|
return dev;
|
|
}
|
|
|
|
static int gsc_read_eeprom(int bus, int slave, int alen, struct venice_board_info *info)
|
|
{
|
|
int i;
|
|
int chksum;
|
|
unsigned char *buf = (unsigned char *)info;
|
|
struct udevice *dev;
|
|
int ret;
|
|
|
|
/* probe device */
|
|
dev = gsc_get_dev(bus, slave);
|
|
if (!dev) {
|
|
if (slave == GSC_EEPROM_ADDR)
|
|
puts("ERROR: Failed to probe EEPROM\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* read eeprom config section */
|
|
memset(info, 0, sizeof(*info));
|
|
ret = i2c_set_chip_offset_len(dev, alen);
|
|
if (ret) {
|
|
puts("EEPROM: Failed to set alen\n");
|
|
return ret;
|
|
}
|
|
ret = dm_i2c_read(dev, 0x00, buf, sizeof(*info));
|
|
if (ret) {
|
|
if (slave == GSC_EEPROM_ADDR)
|
|
printf("EEPROM: Failed to read EEPROM\n");
|
|
return ret;
|
|
}
|
|
|
|
/* validate checksum */
|
|
for (chksum = 0, i = 0; i < (int)sizeof(*info) - 2; i++)
|
|
chksum += buf[i];
|
|
if ((info->chksum[0] != chksum >> 8) ||
|
|
(info->chksum[1] != (chksum & 0xff))) {
|
|
printf("EEPROM: I2C%d@0x%02x: Invalid Checksum\n", bus, slave);
|
|
print_hex_dump_bytes("", DUMP_PREFIX_NONE, buf, sizeof(*info));
|
|
memset(info, 0, sizeof(*info));
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* sanity check valid model */
|
|
if (info->model[0] != 'G' || info->model[1] != 'W') {
|
|
printf("EEPROM: I2C%d@0x%02x: Invalid Model in EEPROM\n", bus, slave);
|
|
print_hex_dump_bytes("", DUMP_PREFIX_NONE, buf, sizeof(*info));
|
|
memset(info, 0, sizeof(*info));
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const char *gsc_get_rst_cause(struct udevice *dev)
|
|
{
|
|
static char str[64];
|
|
static const char * const names[] = {
|
|
"VIN",
|
|
"PB",
|
|
"WDT",
|
|
"CPU",
|
|
"TEMP_L",
|
|
"TEMP_R",
|
|
"SLEEP",
|
|
"BOOT_WDT1",
|
|
"BOOT_WDT2",
|
|
"SOFT_PWR",
|
|
};
|
|
unsigned char reg;
|
|
|
|
/* reset cause */
|
|
str[0] = 0;
|
|
if (!dm_i2c_read(dev, GSC_SC_RST_CAUSE, ®, 1)) {
|
|
if (reg < ARRAY_SIZE(names))
|
|
sprintf(str, "%s", names[reg]);
|
|
else
|
|
sprintf(str, "0x%02x", reg);
|
|
}
|
|
|
|
/* thermal protection */
|
|
if (!dm_i2c_read(dev, GSC_SC_THERM_PROTECT, ®, 1)) {
|
|
strcat(str, " Thermal Protection ");
|
|
if (reg & BIT(0))
|
|
strcat(str, "Enabled");
|
|
else
|
|
strcat(str, "Disabled");
|
|
}
|
|
|
|
return str;
|
|
}
|
|
|
|
/* display hardware monitor ADC channels */
|
|
int gsc_hwmon(void)
|
|
{
|
|
const void *fdt = gd->fdt_blob;
|
|
struct udevice *dev;
|
|
int node, reg, mode, len, val, offset;
|
|
const char *label;
|
|
u8 buf[2];
|
|
int ret;
|
|
|
|
node = fdt_node_offset_by_compatible(fdt, -1, "gw,gsc-adc");
|
|
if (node <= 0)
|
|
return node;
|
|
|
|
/* probe device */
|
|
dev = gsc_get_dev(1, GSC_HWMON_ADDR);
|
|
if (!dev) {
|
|
puts("ERROR: Failed to probe GSC HWMON\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* iterate over hwmon nodes */
|
|
node = fdt_first_subnode(fdt, node);
|
|
while (node > 0) {
|
|
reg = fdtdec_get_int(fdt, node, "reg", -1);
|
|
mode = fdtdec_get_int(fdt, node, "gw,mode", -1);
|
|
offset = fdtdec_get_int(fdt, node, "gw,voltage-offset-microvolt", 0);
|
|
label = fdt_stringlist_get(fdt, node, "label", 0, NULL);
|
|
|
|
if ((reg == -1) || (mode == -1) || !label)
|
|
printf("invalid dt:%s\n", fdt_get_name(fdt, node, NULL));
|
|
|
|
memset(buf, 0, sizeof(buf));
|
|
ret = dm_i2c_read(dev, reg, buf, sizeof(buf));
|
|
if (ret) {
|
|
printf("i2c error: %d\n", ret);
|
|
continue;
|
|
}
|
|
val = buf[0] | buf[1] << 8;
|
|
if (val >= 0) {
|
|
const u32 *div;
|
|
int r[2];
|
|
|
|
switch (mode) {
|
|
case 0: /* temperature (C*10) */
|
|
if (val > 0x8000)
|
|
val -= 0xffff;
|
|
printf("%-8s: %d.%ldC\n", label, val / 10, abs(val % 10));
|
|
break;
|
|
case 1: /* prescaled voltage */
|
|
if (val != 0xffff)
|
|
printf("%-8s: %d.%03dV\n", label, val / 1000, val % 1000);
|
|
break;
|
|
case 2: /* scaled based on ref volt and resolution */
|
|
val *= 2500;
|
|
val /= 1 << 12;
|
|
|
|
/* apply pre-scaler voltage divider */
|
|
div = fdt_getprop(fdt, node, "gw,voltage-divider-ohms", &len);
|
|
if (div && (len == sizeof(uint32_t) * 2)) {
|
|
r[0] = fdt32_to_cpu(div[0]);
|
|
r[1] = fdt32_to_cpu(div[1]);
|
|
if (r[0] && r[1]) {
|
|
val *= (r[0] + r[1]);
|
|
val /= r[1];
|
|
}
|
|
}
|
|
|
|
/* adjust by offset */
|
|
val += (offset / 1000);
|
|
|
|
printf("%-8s: %d.%03dV\n", label, val / 1000, val % 1000);
|
|
break;
|
|
}
|
|
}
|
|
node = fdt_next_subnode(fdt, node);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* determine BOM revision from model */
|
|
int get_bom_rev(const char *str)
|
|
{
|
|
int rev_bom = 0;
|
|
int i;
|
|
|
|
for (i = strlen(str) - 1; i > 0; i--) {
|
|
if (str[i] == '-')
|
|
break;
|
|
if (str[i] >= '1' && str[i] <= '9') {
|
|
rev_bom = str[i] - '0';
|
|
break;
|
|
}
|
|
}
|
|
return rev_bom;
|
|
}
|
|
|
|
/* determine PCB revision from model */
|
|
char get_pcb_rev(const char *str)
|
|
{
|
|
char rev_pcb = 'A';
|
|
int i;
|
|
|
|
for (i = strlen(str) - 1; i > 0; i--) {
|
|
if (str[i] == '-')
|
|
break;
|
|
if (str[i] >= 'A') {
|
|
rev_pcb = str[i];
|
|
break;
|
|
}
|
|
}
|
|
return rev_pcb;
|
|
}
|
|
|
|
/*
|
|
* get dt name based on model and detail level:
|
|
*
|
|
* For boards that are a combination of a SoM plus a Baseboard:
|
|
* Venice SoM part numbers are GW70xx where xx is:
|
|
* 7000-7019: same PCB with som dt of '0x'
|
|
* 7020-7039: same PCB with som dt of '2x'
|
|
* 7040-7059: same PCB with som dt of '4x'
|
|
* 7060-7079: same PCB with som dt of '6x'
|
|
* 7080-7099: same PCB with som dt of '8x'
|
|
* Venice Baseboard part numbers are GW7xxx where xxx is:
|
|
* 7100-7199: same PCB with base dt of '71xx'
|
|
* 7200-7299: same PCB with base dt of '72xx'
|
|
* 7300-7399: same PCB with base dt of '73xx'
|
|
* 7400-7499: same PCB with base dt of '74xx'
|
|
* 7500-7599: same PCB with base dt of '75xx'
|
|
* 7600-7699: same PCB with base dt of '76xx'
|
|
* 7700-7799: same PCB with base dt of '77xx'
|
|
* 7800-7899: same PCB with base dt of '78xx'
|
|
* DT name is comprised of:
|
|
* gw<base dt>-<som dt>-[base-pcb-rev][base-bom-rev][som-pcb-rev][som-bom-rev]
|
|
*
|
|
* For board models from 7900-7999 each PCB is unique with its own dt:
|
|
* DT name is comprised:
|
|
* gw<model>-[pcb-rev][bom-rev]
|
|
*
|
|
*/
|
|
#define snprintfcat(dest, sz, fmt, ...) \
|
|
snprintf((dest) + strlen(dest), (sz) - strlen(dest), fmt, ##__VA_ARGS__)
|
|
const char *gsc_get_dtb_name(int level, char *buf, int sz)
|
|
{
|
|
const char *pre = "imx8mm-venice-gw";
|
|
int model, rev_pcb, rev_bom;
|
|
|
|
model = ((som_info.model[2] - '0') * 1000)
|
|
+ ((som_info.model[3] - '0') * 100)
|
|
+ ((som_info.model[4] - '0') * 10)
|
|
+ (som_info.model[5] - '0');
|
|
rev_pcb = tolower(get_pcb_rev(som_info.model));
|
|
rev_bom = get_bom_rev(som_info.model);
|
|
|
|
/* som + baseboard*/
|
|
if (base_info.model[0]) {
|
|
/* baseboard id: 7100-7199->71; 7200-7299->72; etc */
|
|
int base = ((base_info.model[2] - '0') * 10) + (base_info.model[3] - '0');
|
|
/* som id: 7000-7019->1; 7020-7039->2; etc */
|
|
int som = ((model % 100) / 20) * 2;
|
|
int rev_base_pcb = tolower(get_pcb_rev(base_info.model));
|
|
int rev_base_bom = get_bom_rev(base_info.model);
|
|
|
|
snprintf(buf, sz, "%s%2dxx-%dx", pre, base, som);
|
|
switch (level) {
|
|
case 0: /* full model (ie gw73xx-0x-a1a1) */
|
|
if (rev_base_bom)
|
|
snprintfcat(buf, sz, "-%c%d", rev_base_pcb, rev_base_bom);
|
|
else
|
|
snprintfcat(buf, sz, "-%c", rev_base_pcb);
|
|
if (rev_bom)
|
|
snprintfcat(buf, sz, "%c%d", rev_pcb, rev_bom);
|
|
else
|
|
snprintfcat(buf, sz, "%c", rev_pcb);
|
|
break;
|
|
case 1: /* don't care about SoM revision */
|
|
if (rev_base_bom)
|
|
snprintfcat(buf, sz, "-%c%d", rev_base_pcb, rev_base_bom);
|
|
else
|
|
snprintfcat(buf, sz, "-%c", rev_base_pcb);
|
|
snprintfcat(buf, sz, "xx");
|
|
break;
|
|
case 2: /* don't care about baseboard revision */
|
|
snprintfcat(buf, sz, "-xx");
|
|
if (rev_bom)
|
|
snprintfcat(buf, sz, "%c%d", rev_pcb, rev_bom);
|
|
else
|
|
snprintfcat(buf, sz, "%c", rev_pcb);
|
|
break;
|
|
case 3: /* don't care about SoM/baseboard revision */
|
|
break;
|
|
default:
|
|
return NULL;
|
|
}
|
|
} else {
|
|
snprintf(buf, sz, "%s%04d", pre, model);
|
|
switch (level) {
|
|
case 0: /* full model wth PCB and BOM revision first (ie gw7901-a1) */
|
|
if (rev_bom)
|
|
snprintfcat(buf, sz, "-%c%d", rev_pcb, rev_bom);
|
|
else
|
|
snprintfcat(buf, sz, "-%c", rev_pcb);
|
|
break;
|
|
case 1: /* don't care about BOM revision */
|
|
snprintfcat(buf, sz, "-%c", rev_pcb);
|
|
break;
|
|
case 2: /* don't care about PCB or BOM revision */
|
|
break;
|
|
default:
|
|
return NULL;
|
|
}
|
|
}
|
|
|
|
return buf;
|
|
}
|
|
|
|
static int gsc_read(void)
|
|
{
|
|
int ret;
|
|
|
|
ret = gsc_read_eeprom(1, GSC_EEPROM_ADDR, 1, &som_info);
|
|
if (ret) {
|
|
memset(&som_info, 0, sizeof(som_info));
|
|
return ret;
|
|
}
|
|
|
|
/* read optional baseboard EEPROM */
|
|
return gsc_read_eeprom(2, 0x52, 2, &base_info);
|
|
}
|
|
|
|
static int gsc_info(int verbose)
|
|
{
|
|
struct udevice *dev;
|
|
unsigned char buf[16];
|
|
char rev_pcb;
|
|
int rev_bom;
|
|
|
|
if (!base_info.model[0]) {
|
|
strcpy(venice_model, som_info.model);
|
|
printf("Model : %s\n", som_info.model);
|
|
printf("Serial : %d\n", som_info.serial);
|
|
printf("MFGDate : %02x-%02x-%02x%02x\n",
|
|
som_info.mfgdate[0], som_info.mfgdate[1],
|
|
som_info.mfgdate[2], som_info.mfgdate[3]);
|
|
} else {
|
|
sprintf(venice_model, "GW%c%c%c%c-%c%c-",
|
|
som_info.model[2], /* family */
|
|
base_info.model[3], /* baseboard */
|
|
base_info.model[4], base_info.model[5], /* subload of baseboard */
|
|
som_info.model[4], som_info.model[5]); /* last 2digits of SOM */
|
|
|
|
/* baseboard revision */
|
|
rev_pcb = get_pcb_rev(base_info.model);
|
|
rev_bom = get_bom_rev(base_info.model);
|
|
if (rev_bom)
|
|
sprintf(venice_model + strlen(venice_model), "%c%d", rev_pcb, rev_bom);
|
|
else
|
|
sprintf(venice_model + strlen(venice_model), "%c", rev_pcb);
|
|
/* som revision */
|
|
rev_pcb = get_pcb_rev(som_info.model);
|
|
rev_bom = get_bom_rev(som_info.model);
|
|
if (rev_bom)
|
|
sprintf(venice_model + strlen(venice_model), "%c%d", rev_pcb, rev_bom);
|
|
else
|
|
sprintf(venice_model + strlen(venice_model), "%c", rev_pcb);
|
|
|
|
if (verbose > 1) {
|
|
printf("SOM : %s %d %02x-%02x-%02x%02x\n",
|
|
som_info.model, som_info.serial,
|
|
som_info.mfgdate[0], som_info.mfgdate[1],
|
|
som_info.mfgdate[2], som_info.mfgdate[3]);
|
|
printf("BASE : %s %d %02x-%02x-%02x%02x\n",
|
|
base_info.model, base_info.serial,
|
|
base_info.mfgdate[0], base_info.mfgdate[1],
|
|
base_info.mfgdate[2], base_info.mfgdate[3]);
|
|
}
|
|
printf("Model : %s\n", venice_model);
|
|
printf("Serial : %d\n", som_info.serial);
|
|
printf("MFGDate : %02x-%02x-%02x%02x\n",
|
|
som_info.mfgdate[0], som_info.mfgdate[1],
|
|
som_info.mfgdate[2], som_info.mfgdate[3]);
|
|
}
|
|
|
|
/* Display RTC */
|
|
puts("RTC : ");
|
|
dev = gsc_get_dev(1, GSC_RTC_ADDR);
|
|
if (!dev) {
|
|
puts("Failed to probe GSC RTC\n");
|
|
} else {
|
|
dm_i2c_read(dev, 0, buf, 6);
|
|
printf("%d\n", buf[0] | buf[1] << 8 | buf[2] << 16 | buf[3] << 24);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int gsc_init(int quiet)
|
|
{
|
|
unsigned char buf[16];
|
|
struct udevice *dev;
|
|
int ret;
|
|
|
|
/*
|
|
* On a board with a missing/depleted backup battery for GSC, the
|
|
* board may be ready to probe the GSC before its firmware is
|
|
* running. We will wait here indefinately for the GSC/EEPROM.
|
|
*/
|
|
while (1) {
|
|
/* probe device */
|
|
dev = gsc_get_dev(1, GSC_SC_ADDR);
|
|
if (dev)
|
|
break;
|
|
mdelay(1);
|
|
}
|
|
|
|
ret = dm_i2c_read(dev, 0, buf, sizeof(buf));
|
|
if (ret) {
|
|
puts("ERROR: Failed reading GSC\n");
|
|
return ret;
|
|
}
|
|
gsc_read();
|
|
|
|
/* banner */
|
|
if (!quiet) {
|
|
printf("GSC : v%d 0x%04x", buf[GSC_SC_FWVER],
|
|
buf[GSC_SC_FWCRC] | buf[GSC_SC_FWCRC + 1] << 8);
|
|
printf(" RST:%s", gsc_get_rst_cause(dev));
|
|
printf("\n");
|
|
gsc_info(1);
|
|
}
|
|
|
|
if (ret)
|
|
hang();
|
|
|
|
return ((16 << som_info.sdram_size) / 1024);
|
|
}
|
|
|
|
const char *gsc_get_model(void)
|
|
{
|
|
return venice_model;
|
|
}
|
|
|
|
#if !(IS_ENABLED(CONFIG_SPL_BUILD))
|
|
static int gsc_sleep(unsigned long secs)
|
|
{
|
|
unsigned char reg;
|
|
struct udevice *dev;
|
|
int ret;
|
|
|
|
/* probe device */
|
|
dev = gsc_get_dev(1, GSC_SC_ADDR);
|
|
if (!dev)
|
|
return -ENODEV;
|
|
|
|
printf("GSC Sleeping for %ld seconds\n", secs);
|
|
reg = (secs >> 24) & 0xff;
|
|
ret = dm_i2c_write(dev, 9, ®, 1);
|
|
if (ret)
|
|
goto err;
|
|
reg = (secs >> 16) & 0xff;
|
|
ret = dm_i2c_write(dev, 8, ®, 1);
|
|
if (ret)
|
|
goto err;
|
|
reg = (secs >> 8) & 0xff;
|
|
ret = dm_i2c_write(dev, 7, ®, 1);
|
|
if (ret)
|
|
goto err;
|
|
reg = secs & 0xff;
|
|
ret = dm_i2c_write(dev, 6, ®, 1);
|
|
if (ret)
|
|
goto err;
|
|
ret = dm_i2c_read(dev, GSC_SC_CTRL1, ®, 1);
|
|
if (ret)
|
|
goto err;
|
|
reg |= (1 << 2);
|
|
ret = dm_i2c_write(dev, GSC_SC_CTRL1, ®, 1);
|
|
if (ret)
|
|
goto err;
|
|
reg &= ~(1 << 2);
|
|
reg |= 0x3;
|
|
ret = dm_i2c_write(dev, GSC_SC_CTRL1, ®, 1);
|
|
if (ret)
|
|
goto err;
|
|
|
|
return 0;
|
|
|
|
err:
|
|
printf("i2c error\n");
|
|
return ret;
|
|
}
|
|
|
|
static int gsc_boot_wd_disable(void)
|
|
{
|
|
u8 reg;
|
|
struct udevice *dev;
|
|
int ret;
|
|
|
|
/* probe device */
|
|
dev = gsc_get_dev(1, GSC_SC_ADDR);
|
|
if (!dev)
|
|
return -ENODEV;
|
|
|
|
ret = dm_i2c_read(dev, GSC_SC_CTRL1, ®, 1);
|
|
if (ret)
|
|
goto err;
|
|
reg |= (1 << GSC_SC_CTRL1_WDDIS);
|
|
reg &= ~(1 << GSC_SC_CTRL1_BOOT_CHK);
|
|
ret = dm_i2c_write(dev, GSC_SC_CTRL1, ®, 1);
|
|
if (ret)
|
|
goto err;
|
|
puts("GSC : boot watchdog disabled\n");
|
|
|
|
return 0;
|
|
|
|
err:
|
|
printf("i2c error");
|
|
return ret;
|
|
}
|
|
|
|
static int do_gsc(struct cmd_tbl *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
if (argc < 2)
|
|
return gsc_info(2);
|
|
|
|
if (strcasecmp(argv[1], "sleep") == 0) {
|
|
if (argc < 3)
|
|
return CMD_RET_USAGE;
|
|
if (!gsc_sleep(simple_strtoul(argv[2], NULL, 10)))
|
|
return CMD_RET_SUCCESS;
|
|
} else if (strcasecmp(argv[1], "hwmon") == 0) {
|
|
if (!gsc_hwmon())
|
|
return CMD_RET_SUCCESS;
|
|
} else if (strcasecmp(argv[1], "wd-disable") == 0) {
|
|
if (!gsc_boot_wd_disable())
|
|
return CMD_RET_SUCCESS;
|
|
}
|
|
|
|
return CMD_RET_USAGE;
|
|
}
|
|
|
|
U_BOOT_CMD(gsc, 4, 1, do_gsc, "Gateworks System Controller",
|
|
"[sleep <secs>]|[hwmon]|[wd-disable]\n");
|
|
#endif
|