mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-18 17:23:09 +00:00
52c7e37596
Convert SYS_I2C_EARLY_INIT to Kconfig, and make it depend on SPL_SYS_I2C_LEGACY. Remove the weak implementation as it's either something that needs to exist for real, or shouldn't be called. Signed-off-by: Tom Rini <trini@konsulko.com> |
||
---|---|---|
.. | ||
ddr.c | ||
ddr.h | ||
eth.c | ||
Kconfig | ||
ls1046aqds.c | ||
ls1046aqds_pbi.cfg | ||
ls1046aqds_qixis.h | ||
ls1046aqds_rcw_nand.cfg | ||
ls1046aqds_rcw_sd_ifc.cfg | ||
ls1046aqds_rcw_sd_qspi.cfg | ||
MAINTAINERS | ||
Makefile | ||
README |
Overview -------- The LS1046A Development System (QDS) is a high-performance computing, evaluation, and development platform that supports the QorIQ LS1046A LayerScape Architecture processor. The LS1046AQDS provides SW development platform for the Freescale LS1046A processor series, with a complete debugging environment. LS1046A SoC Overview -------------------- Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS1046A SoC overview. LS1046AQDS board Overview ----------------------- - SERDES Connections, 8 lanes supporting: - PCI Express - 3.0 - SGMII, SGMII 2.5 - QSGMII - SATA 3.0 - XFI - DDR Controller - 8GB 64bits DDR4 SDRAM. Support rates of up to 2133MT/s -IFC/Local Bus - One in-socket 128 MB NOR flash 16-bit data bus - One 512 MB NAND flash with ECC support - PromJet Port - FPGA connection - USB 3.0 - Three high speed USB 3.0 ports - First USB 3.0 port configured as Host with Type-A connector - The other two USB 3.0 ports configured as OTG with micro-AB connector - SDHC port connects directly to an adapter card slot, featuring: - Optional clock feedback paths, and optional high-speed voltage translation assistance - SD slots for SD, SDHC (1x, 4x, 8x), and/or MMC - eMMC memory devices - DSPI: Onboard support for three SPI flash memory devices - 4 I2C controllers - One SATA onboard connectors - UART - Two 4-pin serial ports at up to 115.2 Kbit/s - Two DB9 D-Type connectors supporting one Serial port each - ARM JTAG support Memory map from core's view ---------------------------- Start Address End Address Description Size 0x00_0000_0000 - 0x00_000F_FFFF Secure Boot ROM 1MB 0x00_0100_0000 - 0x00_0FFF_FFFF CCSRBAR 240MB 0x00_1000_0000 - 0x00_1000_FFFF OCRAM0 64KB 0x00_1001_0000 - 0x00_1001_FFFF OCRAM1 64KB 0x00_2000_0000 - 0x00_20FF_FFFF DCSR 16MB 0x00_6000_0000 - 0x00_67FF_FFFF IFC - NOR Flash 128MB 0x00_7E80_0000 - 0x00_7E80_FFFF IFC - NAND Flash 64KB 0x00_7FB0_0000 - 0x00_7FB0_0FFF IFC - FPGA 4KB 0x00_8000_0000 - 0x00_FFFF_FFFF DRAM1 2GB 0x05_0000_0000 - 0x05_07FF_FFFF QMAN S/W Portal 128M 0x05_0800_0000 - 0x05_0FFF_FFFF BMAN S/W Portal 128M 0x08_8000_0000 - 0x09_FFFF_FFFF DRAM2 6GB 0x40_0000_0000 - 0x47_FFFF_FFFF PCI Express1 32G 0x48_0000_0000 - 0x4F_FFFF_FFFF PCI Express2 32G 0x50_0000_0000 - 0x57_FFFF_FFFF PCI Express3 32G Booting Options --------------- a) Promjet Boot b) NOR boot c) NAND boot d) SD boot e) QSPI boot