Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-12 14:23:00 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/arm/dts/rk3326-odroid-go2.dts
Chris Morgan d70c0cab8f rockchip: px30: add support for SFC for Odroid Go Advance 
The Odroid Go Advance uses a Rockchip Serial Flash Controller with an
XT25F128B SPI NOR flash chip. This adds support for both. Note that
while both the controller and chip support quad mode, only two lines
are connected to the chip. Changing the pinctrl to bus2 and setting tx
and rx lines to 2 for this reason.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-08-12 09:34:11 +08:00

732 lines
15 KiB
Text
Raw Blame History

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2019 Hardkernel Co., Ltd
* Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include "rk3326.dtsi"
/ {
model = "ODROID-GO Advance";
compatible = "hardkernel,rk3326-odroid-go2", "rockchip,rk3326";
chosen {
stdout-path = "serial2:115200n8";
};
backlight: backlight {
compatible = "pwm-backlight";
power-supply = <&vcc_bl>;
pwms = <&pwm1 0 25000 0>;
};
adc-joystick {
compatible = "adc-joystick";
io-channels = <&saradc 1>,
<&saradc 2>;
#address-cells = <1>;
#size-cells = <0>;
axis@0 {
reg = <0>;
abs-range = <172 772>;
abs-fuzz = <10>;
abs-flat = <10>;
linux,code = <ABS_X>;
};
axis@1 {
reg = <1>;
abs-range = <278 815>;
abs-fuzz = <10>;
abs-flat = <10>;
linux,code = <ABS_Y>;
};
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&btn_pins>;
/*
* *** ODROIDGO2-Advance Switch layout ***
* |------------------------------------------------|
* | sw15 sw16 |
* |------------------------------------------------|
* | sw1 |-------------------| sw8 |
* | sw3 sw4 | | sw7 sw5 |
* | sw2 | LCD Display | sw6 |
* | | | |
* | |-------------------| |
* | sw9 sw10 sw11 sw12 sw13 sw14 |
* |------------------------------------------------|
*/
sw1 {
gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>;
label = "DPAD-UP";
linux,code = <BTN_DPAD_UP>;
};
sw2 {
gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>;
label = "DPAD-DOWN";
linux,code = <BTN_DPAD_DOWN>;
};
sw3 {
gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
label = "DPAD-LEFT";
linux,code = <BTN_DPAD_LEFT>;
};
sw4 {
gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>;
label = "DPAD-RIGHT";
linux,code = <BTN_DPAD_RIGHT>;
};
sw5 {
gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>;
label = "BTN-A";
linux,code = <BTN_EAST>;
};
sw6 {
gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_LOW>;
label = "BTN-B";
linux,code = <BTN_SOUTH>;
};
sw7 {
gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>;
label = "BTN-Y";
linux,code = <BTN_WEST>;
};
sw8 {
gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_LOW>;
label = "BTN-X";
linux,code = <BTN_NORTH>;
};
sw9 {
gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
label = "F1";
linux,code = <BTN_TRIGGER_HAPPY1>;
};
sw10 {
gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>;
label = "F2";
linux,code = <BTN_TRIGGER_HAPPY2>;
};
sw11 {
gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
label = "F3";
linux,code = <BTN_TRIGGER_HAPPY3>;
};
sw12 {
gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_LOW>;
label = "F4";
linux,code = <BTN_TRIGGER_HAPPY4>;
};
sw13 {
gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_LOW>;
label = "F5";
linux,code = <BTN_TRIGGER_HAPPY5>;
};
sw14 {
gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_LOW>;
label = "F6";
linux,code = <BTN_TRIGGER_HAPPY6>;
};
sw15 {
gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>;
label = "TOP-LEFT";
linux,code = <BTN_TL>;
};
sw16 {
gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_LOW>;
label = "TOP-RIGHT";
linux,code = <BTN_TR>;
};
};
leds: gpio-leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&blue_led_pin>;
blue_led: led-0 {
label = "blue:heartbeat";
gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
};
rk817-sound {
compatible = "simple-audio-card";
simple-audio-card,format = "i2s";
simple-audio-card,name = "rockchip,rk817-codec";
simple-audio-card,mclk-fs = <256>;
simple-audio-card,widgets =
"Microphone", "Mic Jack",
"Headphone", "Headphone Jack";
simple-audio-card,routing =
"MIC_IN", "Mic Jack",
"Headphone Jack", "HPOL",
"Headphone Jack", "HPOR";
simple-audio-card,hp-det-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>;
simple-audio-card,codec-hp-det = <1>;
simple-audio-card,cpu {
sound-dai = <&i2s1_2ch>;
};
simple-audio-card,codec {
sound-dai = <&rk817_codec>;
};
};
vccsys: vccsys {
compatible = "regulator-fixed";
regulator-name = "vcc3v8_sys";
regulator-always-on;
regulator-min-microvolt = <3800000>;
regulator-max-microvolt = <3800000>;
};
vcc_host: vcc_host {
compatible = "regulator-fixed";
regulator-name = "vcc_host";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
vin-supply = <&vccsys>;
};
};
&cpu0 {
cpu-supply = <&vdd_arm>;
};
&cpu1 {
cpu-supply = <&vdd_arm>;
};
&cpu2 {
cpu-supply = <&vdd_arm>;
};
&cpu3 {
cpu-supply = <&vdd_arm>;
};
&cru {
assigned-clocks = <&cru PLL_NPLL>,
<&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
<&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>,
<&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>,
<&cru PLL_CPLL>;
assigned-clock-rates = <1188000000>,
<200000000>, <200000000>,
<150000000>, <150000000>,
<100000000>, <200000000>,
<17000000>;
};
&display_subsystem {
status = "okay";
};
&dsi {
status = "okay";
ports {
mipi_out: port@1 {
reg = <1>;
mipi_out_panel: endpoint {
remote-endpoint = <&mipi_in_panel>;
};
};
};
panel@0 {
compatible = "elida,kd35t133";
reg = <0>;
backlight = <&backlight>;
iovcc-supply = <&vcc_lcd>;
reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
vdd-supply = <&vcc_lcd>;
port {
mipi_in_panel: endpoint {
remote-endpoint = <&mipi_out_panel>;
};
};
};
};
&dsi_dphy {
status = "okay";
};
&gpu {
mali-supply = <&vdd_logic>;
status = "okay";
};
&i2c0 {
clock-frequency = <400000>;
i2c-scl-falling-time-ns = <16>;
i2c-scl-rising-time-ns = <280>;
status = "okay";
rk817: pmic@20 {
compatible = "rockchip,rk817";
reg = <0x20>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default", "pmic-sleep",
"pmic-power-off", "pmic-reset";
pinctrl-0 = <&pmic_int>;
pinctrl-1 = <&soc_slppin_slp>, <&rk817_slppin_slp>;
pinctrl-2 = <&soc_slppin_gpio>, <&rk817_slppin_pwrdn>;
pinctrl-3 = <&soc_slppin_rst>, <&rk817_slppin_rst>;
rockchip,system-power-controller;
wakeup-source;
#clock-cells = <1>;
clock-output-names = "rk808-clkout1", "xin32k";
vcc1-supply = <&vccsys>;
vcc2-supply = <&vccsys>;
vcc3-supply = <&vccsys>;
vcc4-supply = <&vccsys>;
vcc5-supply = <&vccsys>;
vcc6-supply = <&vccsys>;
vcc7-supply = <&vccsys>;
pinctrl_rk8xx: pinctrl_rk8xx {
gpio-controller;
#gpio-cells = <2>;
rk817_ts_gpio1: rk817_ts_gpio1 {
pins = "gpio_ts";
function = "pin_fun1";
/* output-low; */
/* input-enable; */
};
rk817_gt_gpio2: rk817_gt_gpio2 {
pins = "gpio_gt";
function = "pin_fun1";
};
rk817_pin_ts: rk817_pin_ts {
pins = "gpio_ts";
function = "pin_fun0";
};
rk817_pin_gt: rk817_pin_gt {
pins = "gpio_gt";
function = "pin_fun0";
};
rk817_slppin_null: rk817_slppin_null {
pins = "gpio_slp";
function = "pin_fun0";
};
rk817_slppin_slp: rk817_slppin_slp {
pins = "gpio_slp";
function = "pin_fun1";
};
rk817_slppin_pwrdn: rk817_slppin_pwrdn {
pins = "gpio_slp";
function = "pin_fun2";
};
rk817_slppin_rst: rk817_slppin_rst {
pins = "gpio_slp";
function = "pin_fun3";
};
};
regulators {
vdd_logic: DCDC_REG1 {
regulator-name = "vdd_logic";
regulator-min-microvolt = <950000>;
regulator-max-microvolt = <1150000>;
regulator-ramp-delay = <6001>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <950000>;
};
};
vdd_arm: DCDC_REG2 {
regulator-name = "vdd_arm";
regulator-min-microvolt = <950000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <6001>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <950000>;
};
};
vcc_ddr: DCDC_REG3 {
regulator-name = "vcc_ddr";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
};
};
vcc_3v3: DCDC_REG4 {
regulator-name = "vcc_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vcc_1v8: LDO_REG2 {
regulator-name = "vcc_1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vdd_1v0: LDO_REG3 {
regulator-name = "vdd_1v0";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1000000>;
};
};
vcc3v3_pmu: LDO_REG4 {
regulator-name = "vcc3v3_pmu";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vccio_sd: LDO_REG5 {
regulator-name = "vccio_sd";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vcc_sd: LDO_REG6 {
regulator-name = "vcc_sd";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vcc_bl: LDO_REG7 {
regulator-name = "vcc_bl";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vcc_lcd: LDO_REG8 {
regulator-name = "vcc_lcd";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <2800000>;
};
};
vcc_cam: LDO_REG9 {
regulator-name = "vcc_cam";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <3000000>;
};
};
};
battery {
compatible = "rk817,battery";
ocv_table = <3500 3625 3685 3697 3718 3735 3748
3760 3774 3788 3802 3816 3834 3853
3877 3908 3946 3975 4018 4071 4106>;
/* KPL605475 Battery Spec */
/*
Capacity : 3.7V 3000mA
Normal Voltage = 3.7V
Cut-Off Voltage : 3.1V
Internal Impedance : 180 mOhm
Charging Voltage : 4.2V
Charging Voltage Max : 4.25V
Sample resister : 10 mohm
*/
design_capacity = <3000>;
design_qmax = <3000>;
bat_res = <180>;
sleep_enter_current = <300>;
sleep_exit_current = <300>;
sleep_filter_current = <100>;
power_off_thresd = <3500>;
zero_algorithm_vol = <3700>;
max_soc_offset = <60>;
monitor_sec = <5>;
virtual_power = <0>;
sample_res = <10>;
};
charger {
compatible = "rk817,charger";
min_input_voltage = <4500>;
max_input_current = <1500>;
max_chrg_current = <2000>;
max_chrg_voltage = <4200>;
chrg_term_mode = <0>;
chrg_finish_cur = <300>;
virtual_power = <0>;
sample_res = <10>;
/* P.C.B rev0.2 DC Detect & Charger Status LED GPIO */
dc_det_gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
chg_led_gpio = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
extcon = <&u2phy>;
};
rk817_codec: codec {
#sound-dai-cells = <0>;
compatible = "rockchip,rk817-codec";
clocks = <&cru SCLK_I2S1_OUT>;
clock-names = "mclk";
pinctrl-names = "default";
pinctrl-0 = <&i2s1_2ch_mclk>;
hp-volume = <20>;
spk-volume = <3>;
status = "okay";
};
};
};
/* EXT Header(P2): 7(SCL:GPIO0.C2), 8(SDA:GPIO0.C3) */
&i2c1 {
clock-frequency = <400000>;
status = "okay";
};
/* I2S 1 Channel Used */
&i2s1_2ch {
status = "okay";
};
&io_domains {
vccio1-supply = <&vcc_3v3>;
vccio2-supply = <&vccio_sd>;
vccio3-supply = <&vcc_3v3>;
vccio4-supply = <&vcc_3v3>;
vccio5-supply = <&vcc_3v3>;
vccio6-supply = <&vcc_3v3>;
status = "okay";
};
&pmu_io_domains {
pmuio1-supply = <&vcc3v3_pmu>;
pmuio2-supply = <&vcc3v3_pmu>;
status = "okay";
};
&pwm1 {
status = "okay";
};
&saradc {
vref-supply = <&vcc_1v8>;
status = "okay";
};
&sdmmc {
bus-width = <4>;
cap-sd-highspeed;
card-detect-delay = <200>;
cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>; /*[> CD GPIO <]*/
sd-uhs-sdr12;
sd-uhs-sdr25;
sd-uhs-sdr50;
sd-uhs-sdr104;
vmmc-supply = <&vcc_sd>;
vqmmc-supply = <&vccio_sd>;
status = "okay";
};
&sfc {
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&sfc_clk &sfc_cs &sfc_bus2>;
status = "okay";
spi_flash: xt25f128b@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <108000000>;
spi-rx-bus-width = <2>;
spi-tx-bus-width = <2>;
};
};
&tsadc {
status = "okay";
};
&u2phy {
status = "okay";
u2phy_host: host-port {
status = "okay";
};
u2phy_otg: otg-port {
status = "disabled";
};
};
&usb20_otg {
status = "okay";
};
/* EXT Header(P2): 2(RXD:GPIO1.C0),3(TXD:.C1),4(CTS:.C2),5(RTS:.C3) */
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_xfer &uart1_cts>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&uart2m1_xfer>;
status = "okay";
};
&vopb {
status = "okay";
};
&vopb_mmu {
status = "okay";
};
&pinctrl {
btns {
btn_pins: btn-pins {
rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
<1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
<1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
<1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
<1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
<1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
<1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
<1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
<2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
<2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
<2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
<2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
<2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
<2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
<2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
<2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
headphone {
hp_det: hp-det {
rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
leds {
blue_led_pin: blue-led-pin {
rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pmic {
dc_det: dc-det {
rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
};
pmic_int: pmic-int {
rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
};
soc_slppin_gpio: soc_slppin_gpio {
rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>;
};
soc_slppin_rst: soc_slppin_rst {
rockchip,pins = <0 RK_PA4 2 &pcfg_pull_none>;
};
soc_slppin_slp: soc_slppin_slp {
rockchip,pins = <0 RK_PA4 1 &pcfg_pull_none>;
};
};
};
Reference in a new issue View git blame Copy permalink