u-boot/arch/arm/mach-omap2/am33xx
Tom Rini ab86dc7948 ARM: ti816x: Fix enabling GPIO0, enable GPIO1 as well
The TI816x has 2 GPIO banks.  For bank 0 we had been clearing the enable
bit when setting BIT(8).  Correct this by setting it to BIT(1) | BIT(8)
after we set and wait for BIT(1) (aka PRCM_MOD_EN).  Enable GPIO1 as
well so that when CMD_GPIO is enabled it won't crash probing the second
bank.  Enable CMD_GPIO on ti816x_evm.

Signed-off-by: Tom Rini <trini@konsulko.com>
2017-07-11 22:41:56 -04:00
..
board.c arm: omap: Detect boot mode very early 2017-07-10 14:26:04 -04:00
chilisom.c ARM: am335x: Add support for chiliSOM 2017-01-28 14:04:36 -05:00
clk_synthesizer.c arm: Introduce arch/arm/mach-omap2 for OMAP2 derivative platforms 2016-11-21 14:07:29 -05:00
clock.c arm: Introduce arch/arm/mach-omap2 for OMAP2 derivative platforms 2016-11-21 14:07:29 -05:00
clock_am33xx.c arm: am33xx: Add support for mulitiple PLL input frequencies 2017-05-12 08:37:14 -04:00
clock_am43xx.c arm: Introduce arch/arm/mach-omap2 for OMAP2 derivative platforms 2016-11-21 14:07:29 -05:00
clock_ti814x.c arm: Introduce arch/arm/mach-omap2 for OMAP2 derivative platforms 2016-11-21 14:07:29 -05:00
clock_ti816x.c ARM: ti816x: Fix enabling GPIO0, enable GPIO1 as well 2017-07-11 22:41:56 -04:00
ddr.c ti816x: Rework DDR initialization sequence 2017-06-05 11:02:23 -04:00
emif4.c ti816x: Rework DDR initialization sequence 2017-06-05 11:02:23 -04:00
hw_data.c arm: omap: Unify get_device_type() function 2017-06-09 20:34:53 -04:00
Kconfig am33xx: Finish migration of CONFIG_AM33XX/AM43XX 2017-06-09 20:34:09 -04:00
Makefile arm: omap: Unify get_device_type() function 2017-06-09 20:34:53 -04:00
mux.c arm: Introduce arch/arm/mach-omap2 for OMAP2 derivative platforms 2016-11-21 14:07:29 -05:00
prcm-regs.c arm: omap: Unify get_device_type() function 2017-06-09 20:34:53 -04:00
sys_info.c arm: omap: Unify get_device_type() function 2017-06-09 20:34:53 -04:00
ti816x_emif4.c ti816x: Rework DDR initialization sequence 2017-06-05 11:02:23 -04:00