mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-26 04:53:42 +00:00
4aaf06415f
AM/DM37x SoCs add the CTRL_WKUP_CTRL register. It contains the GPIO_IO_PWRDNZ bit, which is required to be set to enable the I/O pads of gpio_126, gpio_127 and gpio_129. Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Cc: Tom Rini <trini@ti.com>
464 lines
17 KiB
C
464 lines
17 KiB
C
/*
|
|
* (C) Copyright 2006-2008
|
|
* Texas Instruments, <www.ti.com>
|
|
* Syed Mohammed Khasim <x0khasim@ti.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
#ifndef _MUX_H_
|
|
#define _MUX_H_
|
|
|
|
/*
|
|
* IEN - Input Enable
|
|
* IDIS - Input Disable
|
|
* PTD - Pull type Down
|
|
* PTU - Pull type Up
|
|
* DIS - Pull type selection is inactive
|
|
* EN - Pull type selection is active
|
|
* M0 - Mode 0
|
|
*/
|
|
|
|
#define IEN (1 << 8)
|
|
|
|
#define IDIS (0 << 8)
|
|
#define PTU (1 << 4)
|
|
#define PTD (0 << 4)
|
|
#define EN (1 << 3)
|
|
#define DIS (0 << 3)
|
|
|
|
#define M0 0
|
|
#define M1 1
|
|
#define M2 2
|
|
#define M3 3
|
|
#define M4 4
|
|
#define M5 5
|
|
#define M6 6
|
|
#define M7 7
|
|
|
|
/*
|
|
* To get the actual address the offset has to added
|
|
* with OMAP34XX_CTRL_BASE to get the actual address
|
|
*/
|
|
|
|
/*SDRC*/
|
|
#define CONTROL_PADCONF_SDRC_D0 0x0030
|
|
#define CONTROL_PADCONF_SDRC_D1 0x0032
|
|
#define CONTROL_PADCONF_SDRC_D2 0x0034
|
|
#define CONTROL_PADCONF_SDRC_D3 0x0036
|
|
#define CONTROL_PADCONF_SDRC_D4 0x0038
|
|
#define CONTROL_PADCONF_SDRC_D5 0x003A
|
|
#define CONTROL_PADCONF_SDRC_D6 0x003C
|
|
#define CONTROL_PADCONF_SDRC_D7 0x003E
|
|
#define CONTROL_PADCONF_SDRC_D8 0x0040
|
|
#define CONTROL_PADCONF_SDRC_D9 0x0042
|
|
#define CONTROL_PADCONF_SDRC_D10 0x0044
|
|
#define CONTROL_PADCONF_SDRC_D11 0x0046
|
|
#define CONTROL_PADCONF_SDRC_D12 0x0048
|
|
#define CONTROL_PADCONF_SDRC_D13 0x004A
|
|
#define CONTROL_PADCONF_SDRC_D14 0x004C
|
|
#define CONTROL_PADCONF_SDRC_D15 0x004E
|
|
#define CONTROL_PADCONF_SDRC_D16 0x0050
|
|
#define CONTROL_PADCONF_SDRC_D17 0x0052
|
|
#define CONTROL_PADCONF_SDRC_D18 0x0054
|
|
#define CONTROL_PADCONF_SDRC_D19 0x0056
|
|
#define CONTROL_PADCONF_SDRC_D20 0x0058
|
|
#define CONTROL_PADCONF_SDRC_D21 0x005A
|
|
#define CONTROL_PADCONF_SDRC_D22 0x005C
|
|
#define CONTROL_PADCONF_SDRC_D23 0x005E
|
|
#define CONTROL_PADCONF_SDRC_D24 0x0060
|
|
#define CONTROL_PADCONF_SDRC_D25 0x0062
|
|
#define CONTROL_PADCONF_SDRC_D26 0x0064
|
|
#define CONTROL_PADCONF_SDRC_D27 0x0066
|
|
#define CONTROL_PADCONF_SDRC_D28 0x0068
|
|
#define CONTROL_PADCONF_SDRC_D29 0x006A
|
|
#define CONTROL_PADCONF_SDRC_D30 0x006C
|
|
#define CONTROL_PADCONF_SDRC_D31 0x006E
|
|
#define CONTROL_PADCONF_SDRC_CLK 0x0070
|
|
#define CONTROL_PADCONF_SDRC_DQS0 0x0072
|
|
#define CONTROL_PADCONF_SDRC_DQS1 0x0074
|
|
#define CONTROL_PADCONF_SDRC_DQS2 0x0076
|
|
#define CONTROL_PADCONF_SDRC_DQS3 0x0078
|
|
/*GPMC*/
|
|
#define CONTROL_PADCONF_GPMC_A1 0x007A
|
|
#define CONTROL_PADCONF_GPMC_A2 0x007C
|
|
#define CONTROL_PADCONF_GPMC_A3 0x007E
|
|
#define CONTROL_PADCONF_GPMC_A4 0x0080
|
|
#define CONTROL_PADCONF_GPMC_A5 0x0082
|
|
#define CONTROL_PADCONF_GPMC_A6 0x0084
|
|
#define CONTROL_PADCONF_GPMC_A7 0x0086
|
|
#define CONTROL_PADCONF_GPMC_A8 0x0088
|
|
#define CONTROL_PADCONF_GPMC_A9 0x008A
|
|
#define CONTROL_PADCONF_GPMC_A10 0x008C
|
|
#define CONTROL_PADCONF_GPMC_D0 0x008E
|
|
#define CONTROL_PADCONF_GPMC_D1 0x0090
|
|
#define CONTROL_PADCONF_GPMC_D2 0x0092
|
|
#define CONTROL_PADCONF_GPMC_D3 0x0094
|
|
#define CONTROL_PADCONF_GPMC_D4 0x0096
|
|
#define CONTROL_PADCONF_GPMC_D5 0x0098
|
|
#define CONTROL_PADCONF_GPMC_D6 0x009A
|
|
#define CONTROL_PADCONF_GPMC_D7 0x009C
|
|
#define CONTROL_PADCONF_GPMC_D8 0x009E
|
|
#define CONTROL_PADCONF_GPMC_D9 0x00A0
|
|
#define CONTROL_PADCONF_GPMC_D10 0x00A2
|
|
#define CONTROL_PADCONF_GPMC_D11 0x00A4
|
|
#define CONTROL_PADCONF_GPMC_D12 0x00A6
|
|
#define CONTROL_PADCONF_GPMC_D13 0x00A8
|
|
#define CONTROL_PADCONF_GPMC_D14 0x00AA
|
|
#define CONTROL_PADCONF_GPMC_D15 0x00AC
|
|
#define CONTROL_PADCONF_GPMC_NCS0 0x00AE
|
|
#define CONTROL_PADCONF_GPMC_NCS1 0x00B0
|
|
#define CONTROL_PADCONF_GPMC_NCS2 0x00B2
|
|
#define CONTROL_PADCONF_GPMC_NCS3 0x00B4
|
|
#define CONTROL_PADCONF_GPMC_NCS4 0x00B6
|
|
#define CONTROL_PADCONF_GPMC_NCS5 0x00B8
|
|
#define CONTROL_PADCONF_GPMC_NCS6 0x00BA
|
|
#define CONTROL_PADCONF_GPMC_NCS7 0x00BC
|
|
#define CONTROL_PADCONF_GPMC_CLK 0x00BE
|
|
#define CONTROL_PADCONF_GPMC_NADV_ALE 0x00C0
|
|
#define CONTROL_PADCONF_GPMC_NOE 0x00C2
|
|
#define CONTROL_PADCONF_GPMC_NWE 0x00C4
|
|
#define CONTROL_PADCONF_GPMC_NBE0_CLE 0x00C6
|
|
#define CONTROL_PADCONF_GPMC_NBE1 0x00C8
|
|
#define CONTROL_PADCONF_GPMC_NWP 0x00CA
|
|
#define CONTROL_PADCONF_GPMC_WAIT0 0x00CC
|
|
#define CONTROL_PADCONF_GPMC_WAIT1 0x00CE
|
|
#define CONTROL_PADCONF_GPMC_WAIT2 0x00D0
|
|
#define CONTROL_PADCONF_GPMC_WAIT3 0x00D2
|
|
/*DSS*/
|
|
#define CONTROL_PADCONF_DSS_PCLK 0x00D4
|
|
#define CONTROL_PADCONF_DSS_HSYNC 0x00D6
|
|
#define CONTROL_PADCONF_DSS_VSYNC 0x00D8
|
|
#define CONTROL_PADCONF_DSS_ACBIAS 0x00DA
|
|
#define CONTROL_PADCONF_DSS_DATA0 0x00DC
|
|
#define CONTROL_PADCONF_DSS_DATA1 0x00DE
|
|
#define CONTROL_PADCONF_DSS_DATA2 0x00E0
|
|
#define CONTROL_PADCONF_DSS_DATA3 0x00E2
|
|
#define CONTROL_PADCONF_DSS_DATA4 0x00E4
|
|
#define CONTROL_PADCONF_DSS_DATA5 0x00E6
|
|
#define CONTROL_PADCONF_DSS_DATA6 0x00E8
|
|
#define CONTROL_PADCONF_DSS_DATA7 0x00EA
|
|
#define CONTROL_PADCONF_DSS_DATA8 0x00EC
|
|
#define CONTROL_PADCONF_DSS_DATA9 0x00EE
|
|
#define CONTROL_PADCONF_DSS_DATA10 0x00F0
|
|
#define CONTROL_PADCONF_DSS_DATA11 0x00F2
|
|
#define CONTROL_PADCONF_DSS_DATA12 0x00F4
|
|
#define CONTROL_PADCONF_DSS_DATA13 0x00F6
|
|
#define CONTROL_PADCONF_DSS_DATA14 0x00F8
|
|
#define CONTROL_PADCONF_DSS_DATA15 0x00FA
|
|
#define CONTROL_PADCONF_DSS_DATA16 0x00FC
|
|
#define CONTROL_PADCONF_DSS_DATA17 0x00FE
|
|
#define CONTROL_PADCONF_DSS_DATA18 0x0100
|
|
#define CONTROL_PADCONF_DSS_DATA19 0x0102
|
|
#define CONTROL_PADCONF_DSS_DATA20 0x0104
|
|
#define CONTROL_PADCONF_DSS_DATA21 0x0106
|
|
#define CONTROL_PADCONF_DSS_DATA22 0x0108
|
|
#define CONTROL_PADCONF_DSS_DATA23 0x010A
|
|
/*CAMERA*/
|
|
#define CONTROL_PADCONF_CAM_HS 0x010C
|
|
#define CONTROL_PADCONF_CAM_VS 0x010E
|
|
#define CONTROL_PADCONF_CAM_XCLKA 0x0110
|
|
#define CONTROL_PADCONF_CAM_PCLK 0x0112
|
|
#define CONTROL_PADCONF_CAM_FLD 0x0114
|
|
#define CONTROL_PADCONF_CAM_D0 0x0116
|
|
#define CONTROL_PADCONF_CAM_D1 0x0118
|
|
#define CONTROL_PADCONF_CAM_D2 0x011A
|
|
#define CONTROL_PADCONF_CAM_D3 0x011C
|
|
#define CONTROL_PADCONF_CAM_D4 0x011E
|
|
#define CONTROL_PADCONF_CAM_D5 0x0120
|
|
#define CONTROL_PADCONF_CAM_D6 0x0122
|
|
#define CONTROL_PADCONF_CAM_D7 0x0124
|
|
#define CONTROL_PADCONF_CAM_D8 0x0126
|
|
#define CONTROL_PADCONF_CAM_D9 0x0128
|
|
#define CONTROL_PADCONF_CAM_D10 0x012A
|
|
#define CONTROL_PADCONF_CAM_D11 0x012C
|
|
#define CONTROL_PADCONF_CAM_XCLKB 0x012E
|
|
#define CONTROL_PADCONF_CAM_WEN 0x0130
|
|
#define CONTROL_PADCONF_CAM_STROBE 0x0132
|
|
#define CONTROL_PADCONF_CSI2_DX0 0x0134
|
|
#define CONTROL_PADCONF_CSI2_DY0 0x0136
|
|
#define CONTROL_PADCONF_CSI2_DX1 0x0138
|
|
#define CONTROL_PADCONF_CSI2_DY1 0x013A
|
|
/*Audio Interface */
|
|
#define CONTROL_PADCONF_MCBSP2_FSX 0x013C
|
|
#define CONTROL_PADCONF_MCBSP2_CLKX 0x013E
|
|
#define CONTROL_PADCONF_MCBSP2_DR 0x0140
|
|
#define CONTROL_PADCONF_MCBSP2_DX 0x0142
|
|
#define CONTROL_PADCONF_MMC1_CLK 0x0144
|
|
#define CONTROL_PADCONF_MMC1_CMD 0x0146
|
|
#define CONTROL_PADCONF_MMC1_DAT0 0x0148
|
|
#define CONTROL_PADCONF_MMC1_DAT1 0x014A
|
|
#define CONTROL_PADCONF_MMC1_DAT2 0x014C
|
|
#define CONTROL_PADCONF_MMC1_DAT3 0x014E
|
|
#define CONTROL_PADCONF_MMC1_DAT4 0x0150
|
|
#define CONTROL_PADCONF_MMC1_DAT5 0x0152
|
|
#define CONTROL_PADCONF_MMC1_DAT6 0x0154
|
|
#define CONTROL_PADCONF_MMC1_DAT7 0x0156
|
|
/*Wireless LAN */
|
|
#define CONTROL_PADCONF_MMC2_CLK 0x0158
|
|
#define CONTROL_PADCONF_MMC2_CMD 0x015A
|
|
#define CONTROL_PADCONF_MMC2_DAT0 0x015C
|
|
#define CONTROL_PADCONF_MMC2_DAT1 0x015E
|
|
#define CONTROL_PADCONF_MMC2_DAT2 0x0160
|
|
#define CONTROL_PADCONF_MMC2_DAT3 0x0162
|
|
#define CONTROL_PADCONF_MMC2_DAT4 0x0164
|
|
#define CONTROL_PADCONF_MMC2_DAT5 0x0166
|
|
#define CONTROL_PADCONF_MMC2_DAT6 0x0168
|
|
#define CONTROL_PADCONF_MMC2_DAT7 0x016A
|
|
/*Bluetooth*/
|
|
#define CONTROL_PADCONF_MCBSP3_DX 0x016C
|
|
#define CONTROL_PADCONF_MCBSP3_DR 0x016E
|
|
#define CONTROL_PADCONF_MCBSP3_CLKX 0x0170
|
|
#define CONTROL_PADCONF_MCBSP3_FSX 0x0172
|
|
#define CONTROL_PADCONF_UART2_CTS 0x0174
|
|
#define CONTROL_PADCONF_UART2_RTS 0x0176
|
|
#define CONTROL_PADCONF_UART2_TX 0x0178
|
|
#define CONTROL_PADCONF_UART2_RX 0x017A
|
|
/*Modem Interface */
|
|
#define CONTROL_PADCONF_UART1_TX 0x017C
|
|
#define CONTROL_PADCONF_UART1_RTS 0x017E
|
|
#define CONTROL_PADCONF_UART1_CTS 0x0180
|
|
#define CONTROL_PADCONF_UART1_RX 0x0182
|
|
#define CONTROL_PADCONF_MCBSP4_CLKX 0x0184
|
|
#define CONTROL_PADCONF_MCBSP4_DR 0x0186
|
|
#define CONTROL_PADCONF_MCBSP4_DX 0x0188
|
|
#define CONTROL_PADCONF_MCBSP4_FSX 0x018A
|
|
#define CONTROL_PADCONF_MCBSP1_CLKR 0x018C
|
|
#define CONTROL_PADCONF_MCBSP1_FSR 0x018E
|
|
#define CONTROL_PADCONF_MCBSP1_DX 0x0190
|
|
#define CONTROL_PADCONF_MCBSP1_DR 0x0192
|
|
#define CONTROL_PADCONF_MCBSP_CLKS 0x0194
|
|
#define CONTROL_PADCONF_MCBSP1_FSX 0x0196
|
|
#define CONTROL_PADCONF_MCBSP1_CLKX 0x0198
|
|
/*Serial Interface*/
|
|
#define CONTROL_PADCONF_UART3_CTS_RCTX 0x019A
|
|
#define CONTROL_PADCONF_UART3_RTS_SD 0x019C
|
|
#define CONTROL_PADCONF_UART3_RX_IRRX 0x019E
|
|
#define CONTROL_PADCONF_UART3_TX_IRTX 0x01A0
|
|
#define CONTROL_PADCONF_HSUSB0_CLK 0x01A2
|
|
#define CONTROL_PADCONF_HSUSB0_STP 0x01A4
|
|
#define CONTROL_PADCONF_HSUSB0_DIR 0x01A6
|
|
#define CONTROL_PADCONF_HSUSB0_NXT 0x01A8
|
|
#define CONTROL_PADCONF_HSUSB0_DATA0 0x01AA
|
|
#define CONTROL_PADCONF_HSUSB0_DATA1 0x01AC
|
|
#define CONTROL_PADCONF_HSUSB0_DATA2 0x01AE
|
|
#define CONTROL_PADCONF_HSUSB0_DATA3 0x01B0
|
|
#define CONTROL_PADCONF_HSUSB0_DATA4 0x01B2
|
|
#define CONTROL_PADCONF_HSUSB0_DATA5 0x01B4
|
|
#define CONTROL_PADCONF_HSUSB0_DATA6 0x01B6
|
|
#define CONTROL_PADCONF_HSUSB0_DATA7 0x01B8
|
|
#define CONTROL_PADCONF_I2C1_SCL 0x01BA
|
|
#define CONTROL_PADCONF_I2C1_SDA 0x01BC
|
|
#define CONTROL_PADCONF_I2C2_SCL 0x01BE
|
|
#define CONTROL_PADCONF_I2C2_SDA 0x01C0
|
|
#define CONTROL_PADCONF_I2C3_SCL 0x01C2
|
|
#define CONTROL_PADCONF_I2C3_SDA 0x01C4
|
|
#define CONTROL_PADCONF_I2C4_SCL 0x0A00
|
|
#define CONTROL_PADCONF_I2C4_SDA 0x0A02
|
|
#define CONTROL_PADCONF_HDQ_SIO 0x01C6
|
|
#define CONTROL_PADCONF_MCSPI1_CLK 0x01C8
|
|
#define CONTROL_PADCONF_MCSPI1_SIMO 0x01CA
|
|
#define CONTROL_PADCONF_MCSPI1_SOMI 0x01CC
|
|
#define CONTROL_PADCONF_MCSPI1_CS0 0x01CE
|
|
#define CONTROL_PADCONF_MCSPI1_CS1 0x01D0
|
|
#define CONTROL_PADCONF_MCSPI1_CS2 0x01D2
|
|
#define CONTROL_PADCONF_MCSPI1_CS3 0x01D4
|
|
#define CONTROL_PADCONF_MCSPI2_CLK 0x01D6
|
|
#define CONTROL_PADCONF_MCSPI2_SIMO 0x01D8
|
|
#define CONTROL_PADCONF_MCSPI2_SOMI 0x01DA
|
|
#define CONTROL_PADCONF_MCSPI2_CS0 0x01DC
|
|
#define CONTROL_PADCONF_MCSPI2_CS1 0x01DE
|
|
/*Control and debug */
|
|
#define CONTROL_PADCONF_SYS_32K 0x0A04
|
|
#define CONTROL_PADCONF_SYS_CLKREQ 0x0A06
|
|
#define CONTROL_PADCONF_SYS_NIRQ 0x01E0
|
|
#define CONTROL_PADCONF_SYS_BOOT0 0x0A0A
|
|
#define CONTROL_PADCONF_SYS_BOOT1 0x0A0C
|
|
#define CONTROL_PADCONF_SYS_BOOT2 0x0A0E
|
|
#define CONTROL_PADCONF_SYS_BOOT3 0x0A10
|
|
#define CONTROL_PADCONF_SYS_BOOT4 0x0A12
|
|
#define CONTROL_PADCONF_SYS_BOOT5 0x0A14
|
|
#define CONTROL_PADCONF_SYS_BOOT6 0x0A16
|
|
#define CONTROL_PADCONF_SYS_OFF_MODE 0x0A18
|
|
#define CONTROL_PADCONF_SYS_CLKOUT1 0x0A1A
|
|
#define CONTROL_PADCONF_SYS_CLKOUT2 0x01E2
|
|
#define CONTROL_PADCONF_JTAG_nTRST 0x0A1C
|
|
#define CONTROL_PADCONF_JTAG_TCK 0x0A1E
|
|
#define CONTROL_PADCONF_JTAG_TMS 0x0A20
|
|
#define CONTROL_PADCONF_JTAG_TDI 0x0A22
|
|
#define CONTROL_PADCONF_JTAG_EMU0 0x0A24
|
|
#define CONTROL_PADCONF_JTAG_EMU1 0x0A26
|
|
#define CONTROL_PADCONF_ETK_CLK 0x0A28
|
|
#define CONTROL_PADCONF_ETK_CTL 0x0A2A
|
|
#define CONTROL_PADCONF_ETK_D0 0x0A2C
|
|
#define CONTROL_PADCONF_ETK_D1 0x0A2E
|
|
#define CONTROL_PADCONF_ETK_D2 0x0A30
|
|
#define CONTROL_PADCONF_ETK_D3 0x0A32
|
|
#define CONTROL_PADCONF_ETK_D4 0x0A34
|
|
#define CONTROL_PADCONF_ETK_D5 0x0A36
|
|
#define CONTROL_PADCONF_ETK_D6 0x0A38
|
|
#define CONTROL_PADCONF_ETK_D7 0x0A3A
|
|
#define CONTROL_PADCONF_ETK_D8 0x0A3C
|
|
#define CONTROL_PADCONF_ETK_D9 0x0A3E
|
|
#define CONTROL_PADCONF_ETK_D10 0x0A40
|
|
#define CONTROL_PADCONF_ETK_D11 0x0A42
|
|
#define CONTROL_PADCONF_ETK_D12 0x0A44
|
|
#define CONTROL_PADCONF_ETK_D13 0x0A46
|
|
#define CONTROL_PADCONF_ETK_D14 0x0A48
|
|
#define CONTROL_PADCONF_ETK_D15 0x0A4A
|
|
#define CONTROL_PADCONF_ETK_CLK_ES2 0x05D8
|
|
#define CONTROL_PADCONF_ETK_CTL_ES2 0x05DA
|
|
#define CONTROL_PADCONF_ETK_D0_ES2 0x05DC
|
|
#define CONTROL_PADCONF_ETK_D1_ES2 0x05DE
|
|
#define CONTROL_PADCONF_ETK_D2_ES2 0x05E0
|
|
#define CONTROL_PADCONF_ETK_D3_ES2 0x05E2
|
|
#define CONTROL_PADCONF_ETK_D4_ES2 0x05E4
|
|
#define CONTROL_PADCONF_ETK_D5_ES2 0x05E6
|
|
#define CONTROL_PADCONF_ETK_D6_ES2 0x05E8
|
|
#define CONTROL_PADCONF_ETK_D7_ES2 0x05EA
|
|
#define CONTROL_PADCONF_ETK_D8_ES2 0x05EC
|
|
#define CONTROL_PADCONF_ETK_D9_ES2 0x05EE
|
|
#define CONTROL_PADCONF_ETK_D10_ES2 0x05F0
|
|
#define CONTROL_PADCONF_ETK_D11_ES2 0x05F2
|
|
#define CONTROL_PADCONF_ETK_D12_ES2 0x05F4
|
|
#define CONTROL_PADCONF_ETK_D13_ES2 0x05F6
|
|
#define CONTROL_PADCONF_ETK_D14_ES2 0x05F8
|
|
#define CONTROL_PADCONF_ETK_D15_ES2 0x05FA
|
|
/*Die to Die */
|
|
#define CONTROL_PADCONF_D2D_MCAD0 0x01E4
|
|
#define CONTROL_PADCONF_D2D_MCAD1 0x01E6
|
|
#define CONTROL_PADCONF_D2D_MCAD2 0x01E8
|
|
#define CONTROL_PADCONF_D2D_MCAD3 0x01EA
|
|
#define CONTROL_PADCONF_D2D_MCAD4 0x01EC
|
|
#define CONTROL_PADCONF_D2D_MCAD5 0x01EE
|
|
#define CONTROL_PADCONF_D2D_MCAD6 0x01F0
|
|
#define CONTROL_PADCONF_D2D_MCAD7 0x01F2
|
|
#define CONTROL_PADCONF_D2D_MCAD8 0x01F4
|
|
#define CONTROL_PADCONF_D2D_MCAD9 0x01F6
|
|
#define CONTROL_PADCONF_D2D_MCAD10 0x01F8
|
|
#define CONTROL_PADCONF_D2D_MCAD11 0x01FA
|
|
#define CONTROL_PADCONF_D2D_MCAD12 0x01FC
|
|
#define CONTROL_PADCONF_D2D_MCAD13 0x01FE
|
|
#define CONTROL_PADCONF_D2D_MCAD14 0x0200
|
|
#define CONTROL_PADCONF_D2D_MCAD15 0x0202
|
|
#define CONTROL_PADCONF_D2D_MCAD16 0x0204
|
|
#define CONTROL_PADCONF_D2D_MCAD17 0x0206
|
|
#define CONTROL_PADCONF_D2D_MCAD18 0x0208
|
|
#define CONTROL_PADCONF_D2D_MCAD19 0x020A
|
|
#define CONTROL_PADCONF_D2D_MCAD20 0x020C
|
|
#define CONTROL_PADCONF_D2D_MCAD21 0x020E
|
|
#define CONTROL_PADCONF_D2D_MCAD22 0x0210
|
|
#define CONTROL_PADCONF_D2D_MCAD23 0x0212
|
|
#define CONTROL_PADCONF_D2D_MCAD24 0x0214
|
|
#define CONTROL_PADCONF_D2D_MCAD25 0x0216
|
|
#define CONTROL_PADCONF_D2D_MCAD26 0x0218
|
|
#define CONTROL_PADCONF_D2D_MCAD27 0x021A
|
|
#define CONTROL_PADCONF_D2D_MCAD28 0x021C
|
|
#define CONTROL_PADCONF_D2D_MCAD29 0x021E
|
|
#define CONTROL_PADCONF_D2D_MCAD30 0x0220
|
|
#define CONTROL_PADCONF_D2D_MCAD31 0x0222
|
|
#define CONTROL_PADCONF_D2D_MCAD32 0x0224
|
|
#define CONTROL_PADCONF_D2D_MCAD33 0x0226
|
|
#define CONTROL_PADCONF_D2D_MCAD34 0x0228
|
|
#define CONTROL_PADCONF_D2D_MCAD35 0x022A
|
|
#define CONTROL_PADCONF_D2D_MCAD36 0x022C
|
|
#define CONTROL_PADCONF_D2D_CLK26MI 0x022E
|
|
#define CONTROL_PADCONF_D2D_NRESPWRON 0x0230
|
|
#define CONTROL_PADCONF_D2D_NRESWARM 0x0232
|
|
#define CONTROL_PADCONF_D2D_ARM9NIRQ 0x0234
|
|
#define CONTROL_PADCONF_D2D_UMA2P6FIQ 0x0236
|
|
#define CONTROL_PADCONF_D2D_SPINT 0x0238
|
|
#define CONTROL_PADCONF_D2D_FRINT 0x023A
|
|
#define CONTROL_PADCONF_D2D_DMAREQ0 0x023C
|
|
#define CONTROL_PADCONF_D2D_DMAREQ1 0x023E
|
|
#define CONTROL_PADCONF_D2D_DMAREQ2 0x0240
|
|
#define CONTROL_PADCONF_D2D_DMAREQ3 0x0242
|
|
#define CONTROL_PADCONF_D2D_N3GTRST 0x0244
|
|
#define CONTROL_PADCONF_D2D_N3GTDI 0x0246
|
|
#define CONTROL_PADCONF_D2D_N3GTDO 0x0248
|
|
#define CONTROL_PADCONF_D2D_N3GTMS 0x024A
|
|
#define CONTROL_PADCONF_D2D_N3GTCK 0x024C
|
|
#define CONTROL_PADCONF_D2D_N3GRTCK 0x024E
|
|
#define CONTROL_PADCONF_D2D_MSTDBY 0x0250
|
|
#define CONTROL_PADCONF_D2D_SWAKEUP 0x0A4C
|
|
#define CONTROL_PADCONF_D2D_IDLEREQ 0x0252
|
|
#define CONTROL_PADCONF_D2D_IDLEACK 0x0254
|
|
#define CONTROL_PADCONF_D2D_MWRITE 0x0256
|
|
#define CONTROL_PADCONF_D2D_SWRITE 0x0258
|
|
#define CONTROL_PADCONF_D2D_MREAD 0x025A
|
|
#define CONTROL_PADCONF_D2D_SREAD 0x025C
|
|
#define CONTROL_PADCONF_D2D_MBUSFLAG 0x025E
|
|
#define CONTROL_PADCONF_D2D_SBUSFLAG 0x0260
|
|
#define CONTROL_PADCONF_SDRC_CKE0 0x0262
|
|
#define CONTROL_PADCONF_SDRC_CKE1 0x0264
|
|
|
|
/* AM3517 specific mux configuration */
|
|
#define CONTROL_PADCONF_SYS_NRESWARM 0x0A08
|
|
/* CCDC */
|
|
#define CONTROL_PADCONF_CCDC_PCLK 0x01E4
|
|
#define CONTROL_PADCONF_CCDC_FIELD 0x01E6
|
|
#define CONTROL_PADCONF_CCDC_HD 0x01E8
|
|
#define CONTROL_PADCONF_CCDC_VD 0x01EA
|
|
#define CONTROL_PADCONF_CCDC_WEN 0x01EC
|
|
#define CONTROL_PADCONF_CCDC_DATA0 0x01EE
|
|
#define CONTROL_PADCONF_CCDC_DATA1 0x01F0
|
|
#define CONTROL_PADCONF_CCDC_DATA2 0x01F2
|
|
#define CONTROL_PADCONF_CCDC_DATA3 0x01F4
|
|
#define CONTROL_PADCONF_CCDC_DATA4 0x01F6
|
|
#define CONTROL_PADCONF_CCDC_DATA5 0x01F8
|
|
#define CONTROL_PADCONF_CCDC_DATA6 0x01FA
|
|
#define CONTROL_PADCONF_CCDC_DATA7 0x01FC
|
|
/* RMII */
|
|
#define CONTROL_PADCONF_RMII_MDIO_DATA 0x01FE
|
|
#define CONTROL_PADCONF_RMII_MDIO_CLK 0x0200
|
|
#define CONTROL_PADCONF_RMII_RXD0 0x0202
|
|
#define CONTROL_PADCONF_RMII_RXD1 0x0204
|
|
#define CONTROL_PADCONF_RMII_CRS_DV 0x0206
|
|
#define CONTROL_PADCONF_RMII_RXER 0x0208
|
|
#define CONTROL_PADCONF_RMII_TXD0 0x020A
|
|
#define CONTROL_PADCONF_RMII_TXD1 0x020C
|
|
#define CONTROL_PADCONF_RMII_TXEN 0x020E
|
|
#define CONTROL_PADCONF_RMII_50MHZ_CLK 0x0210
|
|
#define CONTROL_PADCONF_USB0_DRVBUS 0x0212
|
|
/* CAN */
|
|
#define CONTROL_PADCONF_HECC1_TXD 0x0214
|
|
#define CONTROL_PADCONF_HECC1_RXD 0x0216
|
|
|
|
#define CONTROL_PADCONF_SYS_BOOT7 0x0218
|
|
#define CONTROL_PADCONF_SDRC_DQS0N 0x021A
|
|
#define CONTROL_PADCONF_SDRC_DQS1N 0x021C
|
|
#define CONTROL_PADCONF_SDRC_DQS2N 0x021E
|
|
#define CONTROL_PADCONF_SDRC_DQS3N 0x0220
|
|
#define CONTROL_PADCONF_STRBEN_DLY0 0x0222
|
|
#define CONTROL_PADCONF_STRBEN_DLY1 0x0224
|
|
#define CONTROL_PADCONF_SYS_BOOT8 0x0226
|
|
|
|
/* AM/DM37xx specific */
|
|
#define CONTROL_PADCONF_GPIO127 0x0A54
|
|
#define CONTROL_PADCONF_GPIO126 0x0A56
|
|
#define CONTROL_PADCONF_GPIO128 0x0A58
|
|
#define CONTROL_PADCONF_GPIO129 0x0A5A
|
|
|
|
/* AM/DM37xx specific: gpio_127, gpio_127 and gpio_129 require configuration
|
|
* of the extended drain cells */
|
|
#define OMAP34XX_CTRL_WKUP_CTRL (OMAP34XX_CTRL_BASE + 0x0A5C)
|
|
#define OMAP34XX_CTRL_WKUP_CTRL_GPIO_IO_PWRDNZ (1<<6)
|
|
|
|
#define MUX_VAL(OFFSET,VALUE)\
|
|
writew((VALUE), OMAP34XX_CTRL_BASE + (OFFSET));
|
|
|
|
#define CP(x) (CONTROL_PADCONF_##x)
|
|
|
|
#endif
|