mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-29 14:33:08 +00:00
9a3b4ceb37
Move this function out of common.h and into a relevant header file. Signed-off-by: Simon Glass <sjg@chromium.org>
529 lines
13 KiB
C
529 lines
13 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* board.c
|
|
*
|
|
* (C) Copyright 2016
|
|
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
|
|
*
|
|
* Based on:
|
|
* Board functions for TI AM335X based boards
|
|
*
|
|
* Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <cpu_func.h>
|
|
#include <env.h>
|
|
#include <errno.h>
|
|
#include <init.h>
|
|
#include <irq_func.h>
|
|
#include <spl.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/hardware.h>
|
|
#include <asm/arch/omap.h>
|
|
#include <asm/arch/ddr_defs.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/arch/mmc_host_def.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/arch/mem.h>
|
|
#include <asm/io.h>
|
|
#include <asm/emif.h>
|
|
#include <asm/gpio.h>
|
|
#include <i2c.h>
|
|
#include <miiphy.h>
|
|
#include <cpsw.h>
|
|
#include <power/tps65217.h>
|
|
#include <env_internal.h>
|
|
#include <watchdog.h>
|
|
#include "mmc.h"
|
|
#include "board.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
static struct shc_eeprom __attribute__((section(".data"))) header;
|
|
static int shc_eeprom_valid;
|
|
|
|
/*
|
|
* Read header information from EEPROM into global structure.
|
|
*/
|
|
static int read_eeprom(void)
|
|
{
|
|
/* Check if baseboard eeprom is available */
|
|
if (i2c_probe(CONFIG_SYS_I2C_EEPROM_ADDR)) {
|
|
puts("Could not probe the EEPROM; something fundamentally wrong on the I2C bus.\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* read the eeprom using i2c */
|
|
if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 2, (uchar *)&header,
|
|
sizeof(header))) {
|
|
puts("Could not read the EEPROM; something fundamentally wrong on the I2C bus.\n");
|
|
return -EIO;
|
|
}
|
|
|
|
if (header.magic != HDR_MAGIC) {
|
|
printf("Incorrect magic number (0x%x) in EEPROM\n",
|
|
header.magic);
|
|
return -EIO;
|
|
}
|
|
|
|
shc_eeprom_valid = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void shc_request_gpio(void)
|
|
{
|
|
gpio_request(LED_PWR_BL_GPIO, "LED PWR BL");
|
|
gpio_request(LED_PWR_RD_GPIO, "LED PWR RD");
|
|
gpio_request(RESET_GPIO, "reset");
|
|
gpio_request(WIFI_REGEN_GPIO, "WIFI REGEN");
|
|
gpio_request(WIFI_RST_GPIO, "WIFI rst");
|
|
gpio_request(ZIGBEE_RST_GPIO, "ZigBee rst");
|
|
gpio_request(BIDCOS_RST_GPIO, "BIDCOS rst");
|
|
gpio_request(ENOC_RST_GPIO, "ENOC rst");
|
|
#if defined CONFIG_B_SAMPLE
|
|
gpio_request(LED_PWR_GN_GPIO, "LED PWR GN");
|
|
gpio_request(LED_CONN_BL_GPIO, "LED CONN BL");
|
|
gpio_request(LED_CONN_RD_GPIO, "LED CONN RD");
|
|
gpio_request(LED_CONN_GN_GPIO, "LED CONN GN");
|
|
#else
|
|
gpio_request(LED_LAN_BL_GPIO, "LED LAN BL");
|
|
gpio_request(LED_LAN_RD_GPIO, "LED LAN RD");
|
|
gpio_request(LED_CLOUD_BL_GPIO, "LED CLOUD BL");
|
|
gpio_request(LED_CLOUD_RD_GPIO, "LED CLOUD RD");
|
|
gpio_request(LED_PWM_GPIO, "LED PWM");
|
|
gpio_request(Z_WAVE_RST_GPIO, "Z WAVE rst");
|
|
#endif
|
|
gpio_request(BACK_BUTTON_GPIO, "Back button");
|
|
gpio_request(FRONT_BUTTON_GPIO, "Front button");
|
|
}
|
|
|
|
/*
|
|
* Function which forces all installed modules into running state for ICT
|
|
* testing. Called by SPL.
|
|
*/
|
|
static void __maybe_unused force_modules_running(void)
|
|
{
|
|
/* Wi-Fi power regulator enable - high = enabled */
|
|
gpio_direction_output(WIFI_REGEN_GPIO, 1);
|
|
/*
|
|
* Wait for Wi-Fi power regulator to reach a stable voltage
|
|
* (soft-start time, max. 350 µs)
|
|
*/
|
|
__udelay(350);
|
|
|
|
/* Wi-Fi module reset - high = running */
|
|
gpio_direction_output(WIFI_RST_GPIO, 1);
|
|
|
|
/* ZigBee reset - high = running */
|
|
gpio_direction_output(ZIGBEE_RST_GPIO, 1);
|
|
|
|
/* BidCos reset - high = running */
|
|
gpio_direction_output(BIDCOS_RST_GPIO, 1);
|
|
|
|
#if !defined(CONFIG_B_SAMPLE)
|
|
/* Z-Wave reset - high = running */
|
|
gpio_direction_output(Z_WAVE_RST_GPIO, 1);
|
|
#endif
|
|
|
|
/* EnOcean reset - low = running */
|
|
gpio_direction_output(ENOC_RST_GPIO, 0);
|
|
}
|
|
|
|
/*
|
|
* Function which forces all installed modules into reset - to be released by
|
|
* the OS, called by SPL
|
|
*/
|
|
static void __maybe_unused force_modules_reset(void)
|
|
{
|
|
/* Wi-Fi module reset - low = reset */
|
|
gpio_direction_output(WIFI_RST_GPIO, 0);
|
|
|
|
/* Wi-Fi power regulator enable - low = disabled */
|
|
gpio_direction_output(WIFI_REGEN_GPIO, 0);
|
|
|
|
/* ZigBee reset - low = reset */
|
|
gpio_direction_output(ZIGBEE_RST_GPIO, 0);
|
|
|
|
/* BidCos reset - low = reset */
|
|
/*gpio_direction_output(BIDCOS_RST_GPIO, 0);*/
|
|
|
|
#if !defined(CONFIG_B_SAMPLE)
|
|
/* Z-Wave reset - low = reset */
|
|
gpio_direction_output(Z_WAVE_RST_GPIO, 0);
|
|
#endif
|
|
|
|
/* EnOcean reset - high = reset*/
|
|
gpio_direction_output(ENOC_RST_GPIO, 1);
|
|
}
|
|
|
|
/*
|
|
* Function to set the LEDs in the state "Bootloader booting"
|
|
*/
|
|
static void __maybe_unused leds_set_booting(void)
|
|
{
|
|
#if defined(CONFIG_B_SAMPLE)
|
|
|
|
/* Turn all red LEDs on */
|
|
gpio_direction_output(LED_PWR_RD_GPIO, 1);
|
|
gpio_direction_output(LED_CONN_RD_GPIO, 1);
|
|
|
|
#else /* All other SHCs starting with B2-Sample */
|
|
/* Set the PWM GPIO */
|
|
gpio_direction_output(LED_PWM_GPIO, 1);
|
|
/* Turn all red LEDs on */
|
|
gpio_direction_output(LED_PWR_RD_GPIO, 1);
|
|
gpio_direction_output(LED_LAN_RD_GPIO, 1);
|
|
gpio_direction_output(LED_CLOUD_RD_GPIO, 1);
|
|
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* Function to set the LEDs in the state "Bootloader error"
|
|
*/
|
|
static void leds_set_failure(int state)
|
|
{
|
|
#if defined(CONFIG_B_SAMPLE)
|
|
/* Turn all blue and green LEDs off */
|
|
gpio_set_value(LED_PWR_BL_GPIO, 0);
|
|
gpio_set_value(LED_PWR_GN_GPIO, 0);
|
|
gpio_set_value(LED_CONN_BL_GPIO, 0);
|
|
gpio_set_value(LED_CONN_GN_GPIO, 0);
|
|
|
|
/* Turn all red LEDs to 'state' */
|
|
gpio_set_value(LED_PWR_RD_GPIO, state);
|
|
gpio_set_value(LED_CONN_RD_GPIO, state);
|
|
|
|
#else /* All other SHCs starting with B2-Sample */
|
|
/* Set the PWM GPIO */
|
|
gpio_direction_output(LED_PWM_GPIO, 1);
|
|
|
|
/* Turn all blue LEDs off */
|
|
gpio_set_value(LED_PWR_BL_GPIO, 0);
|
|
gpio_set_value(LED_LAN_BL_GPIO, 0);
|
|
gpio_set_value(LED_CLOUD_BL_GPIO, 0);
|
|
|
|
/* Turn all red LEDs to 'state' */
|
|
gpio_set_value(LED_PWR_RD_GPIO, state);
|
|
gpio_set_value(LED_LAN_RD_GPIO, state);
|
|
gpio_set_value(LED_CLOUD_RD_GPIO, state);
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* Function to set the LEDs in the state "Bootloader finished"
|
|
*/
|
|
static void leds_set_finish(void)
|
|
{
|
|
#if defined(CONFIG_B_SAMPLE)
|
|
/* Turn all LEDs off */
|
|
gpio_set_value(LED_PWR_BL_GPIO, 0);
|
|
gpio_set_value(LED_PWR_RD_GPIO, 0);
|
|
gpio_set_value(LED_PWR_GN_GPIO, 0);
|
|
gpio_set_value(LED_CONN_BL_GPIO, 0);
|
|
gpio_set_value(LED_CONN_RD_GPIO, 0);
|
|
gpio_set_value(LED_CONN_GN_GPIO, 0);
|
|
#else /* All other SHCs starting with B2-Sample */
|
|
/* Turn all LEDs off */
|
|
gpio_set_value(LED_PWR_BL_GPIO, 0);
|
|
gpio_set_value(LED_PWR_RD_GPIO, 0);
|
|
gpio_set_value(LED_LAN_BL_GPIO, 0);
|
|
gpio_set_value(LED_LAN_RD_GPIO, 0);
|
|
gpio_set_value(LED_CLOUD_BL_GPIO, 0);
|
|
gpio_set_value(LED_CLOUD_RD_GPIO, 0);
|
|
|
|
/* Turn off the PWM GPIO and mux it to EHRPWM */
|
|
gpio_set_value(LED_PWM_GPIO, 0);
|
|
enable_shc_board_pwm_pin_mux();
|
|
#endif
|
|
}
|
|
|
|
static void check_button_status(void)
|
|
{
|
|
ulong value;
|
|
gpio_direction_input(FRONT_BUTTON_GPIO);
|
|
value = gpio_get_value(FRONT_BUTTON_GPIO);
|
|
|
|
if (value == 0) {
|
|
printf("front button activated !\n");
|
|
env_set("harakiri", "1");
|
|
}
|
|
}
|
|
|
|
#if defined(CONFIG_SPL_BUILD)
|
|
#ifdef CONFIG_SPL_OS_BOOT
|
|
int spl_start_uboot(void)
|
|
{
|
|
return 1;
|
|
}
|
|
#endif
|
|
|
|
static void shc_board_early_init(void)
|
|
{
|
|
shc_request_gpio();
|
|
# ifdef CONFIG_SHC_ICT
|
|
/* Force all modules into enabled state for ICT testing */
|
|
force_modules_running();
|
|
# else
|
|
/* Force all modules to enter Reset state until released by the OS */
|
|
force_modules_reset();
|
|
# endif
|
|
leds_set_booting();
|
|
}
|
|
|
|
static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
|
|
|
|
#define MPU_SPREADING_PERMILLE 18 /* Spread 1.8 percent */
|
|
#define OSC (V_OSCK/1000000)
|
|
/* Bosch: Predivider must be fixed to 4, so N = 4-1 */
|
|
#define MPUPLL_N (4-1)
|
|
/* Bosch: Fref = 24 MHz / (N+1) = 24 MHz / 4 = 6 MHz */
|
|
#define MPUPLL_FREF (OSC / (MPUPLL_N + 1))
|
|
|
|
const struct dpll_params dpll_ddr_shc = {
|
|
400, OSC-1, 1, -1, -1, -1, -1};
|
|
|
|
const struct dpll_params *get_dpll_ddr_params(void)
|
|
{
|
|
return &dpll_ddr_shc;
|
|
}
|
|
|
|
/*
|
|
* As we enabled downspread SSC with 1.8%, the values needed to be corrected
|
|
* such that the 20% overshoot will not lead to too high frequencies.
|
|
* In all cases, this is achieved by subtracting one from M (6 MHz less).
|
|
* Example: 600 MHz CPU
|
|
* Step size: 24 MHz OSC, N = 4 (fix) --> Fref = 6 MHz
|
|
* 600 MHz - 6 MHz (1x Fref) = 594 MHz
|
|
* SSC: 594 MHz * 1.8% = 10.7 MHz SSC
|
|
* Overshoot: 10.7 MHz * 20 % = 2.2 MHz
|
|
* --> Fmax = 594 MHz + 2.2 MHz = 596.2 MHz, lower than 600 MHz --> OK!
|
|
*/
|
|
const struct dpll_params dpll_mpu_shc_opp100 = {
|
|
99, MPUPLL_N, 1, -1, -1, -1, -1};
|
|
|
|
void am33xx_spl_board_init(void)
|
|
{
|
|
int sil_rev;
|
|
int mpu_vdd;
|
|
|
|
puts(BOARD_ID_STR);
|
|
|
|
/*
|
|
* Set CORE Frequency to OPP100
|
|
* Hint: DCDC3 (CORE) defaults to 1.100V (for OPP100)
|
|
*/
|
|
do_setup_dpll(&dpll_core_regs, &dpll_core_opp100);
|
|
|
|
sil_rev = readl(&cdev->deviceid) >> 28;
|
|
if (sil_rev < 2) {
|
|
puts("We do not support Silicon Revisions below 2.0!\n");
|
|
return;
|
|
}
|
|
|
|
dpll_mpu_opp100.m = am335x_get_efuse_mpu_max_freq(cdev);
|
|
if (i2c_probe(TPS65217_CHIP_PM))
|
|
return;
|
|
|
|
/*
|
|
* Retrieve the CPU max frequency by reading the efuse
|
|
* SHC-Default: 600 MHz
|
|
*/
|
|
switch (dpll_mpu_opp100.m) {
|
|
case MPUPLL_M_1000:
|
|
mpu_vdd = TPS65217_DCDC_VOLT_SEL_1325MV;
|
|
break;
|
|
case MPUPLL_M_800:
|
|
mpu_vdd = TPS65217_DCDC_VOLT_SEL_1275MV;
|
|
break;
|
|
case MPUPLL_M_720:
|
|
mpu_vdd = TPS65217_DCDC_VOLT_SEL_1200MV;
|
|
break;
|
|
case MPUPLL_M_600:
|
|
mpu_vdd = TPS65217_DCDC_VOLT_SEL_1100MV;
|
|
break;
|
|
case MPUPLL_M_300:
|
|
mpu_vdd = TPS65217_DCDC_VOLT_SEL_950MV;
|
|
break;
|
|
default:
|
|
puts("Cannot determine the frequency, failing!\n");
|
|
return;
|
|
}
|
|
|
|
if (tps65217_voltage_update(TPS65217_DEFDCDC2, mpu_vdd)) {
|
|
puts("tps65217_voltage_update failure\n");
|
|
return;
|
|
}
|
|
|
|
/* Set MPU Frequency to what we detected */
|
|
printf("MPU reference clock runs at %d MHz\n", MPUPLL_FREF);
|
|
printf("Setting MPU clock to %d MHz\n", MPUPLL_FREF *
|
|
dpll_mpu_shc_opp100.m);
|
|
do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_shc_opp100);
|
|
|
|
/* Enable Spread Spectrum for this freq to be clean on EMI side */
|
|
set_mpu_spreadspectrum(MPU_SPREADING_PERMILLE);
|
|
|
|
/*
|
|
* Using the default voltages for the PMIC (TPS65217D)
|
|
* LS1 = 1.8V (VDD_1V8)
|
|
* LS2 = 3.3V (VDD_3V3A)
|
|
* LDO1 = 1.8V (VIO and VRTC)
|
|
* LDO2 = 3.3V (VDD_3V3AUX)
|
|
*/
|
|
shc_board_early_init();
|
|
}
|
|
|
|
void set_uart_mux_conf(void)
|
|
{
|
|
enable_uart0_pin_mux();
|
|
}
|
|
|
|
void set_mux_conf_regs(void)
|
|
{
|
|
enable_shc_board_pin_mux();
|
|
}
|
|
|
|
const struct ctrl_ioregs ioregs_evmsk = {
|
|
.cm0ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
|
|
.cm1ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
|
|
.cm2ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
|
|
.dt0ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
|
|
.dt1ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
|
|
};
|
|
|
|
static const struct ddr_data ddr3_shc_data = {
|
|
.datardsratio0 = MT41K256M16HA125E_RD_DQS,
|
|
.datawdsratio0 = MT41K256M16HA125E_WR_DQS,
|
|
.datafwsratio0 = MT41K256M16HA125E_PHY_FIFO_WE,
|
|
.datawrsratio0 = MT41K256M16HA125E_PHY_WR_DATA,
|
|
};
|
|
|
|
static const struct cmd_control ddr3_shc_cmd_ctrl_data = {
|
|
.cmd0csratio = MT41K256M16HA125E_RATIO,
|
|
.cmd0iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
|
|
|
|
.cmd1csratio = MT41K256M16HA125E_RATIO,
|
|
.cmd1iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
|
|
|
|
.cmd2csratio = MT41K256M16HA125E_RATIO,
|
|
.cmd2iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
|
|
};
|
|
|
|
static struct emif_regs ddr3_shc_emif_reg_data = {
|
|
.sdram_config = MT41K256M16HA125E_EMIF_SDCFG,
|
|
.ref_ctrl = MT41K256M16HA125E_EMIF_SDREF,
|
|
.sdram_tim1 = MT41K256M16HA125E_EMIF_TIM1,
|
|
.sdram_tim2 = MT41K256M16HA125E_EMIF_TIM2,
|
|
.sdram_tim3 = MT41K256M16HA125E_EMIF_TIM3,
|
|
.zq_config = MT41K256M16HA125E_ZQ_CFG,
|
|
.emif_ddr_phy_ctlr_1 = MT41K256M16HA125E_EMIF_READ_LATENCY |
|
|
PHY_EN_DYN_PWRDN,
|
|
};
|
|
|
|
void sdram_init(void)
|
|
{
|
|
/* Configure the DDR3 RAM */
|
|
config_ddr(400, &ioregs_evmsk, &ddr3_shc_data,
|
|
&ddr3_shc_cmd_ctrl_data, &ddr3_shc_emif_reg_data, 0);
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Basic board specific setup. Pinmux has been handled already.
|
|
*/
|
|
int board_init(void)
|
|
{
|
|
#if defined(CONFIG_HW_WATCHDOG)
|
|
hw_watchdog_init();
|
|
#endif
|
|
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
|
|
if (read_eeprom() < 0)
|
|
puts("EEPROM Content Invalid.\n");
|
|
|
|
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
|
|
#if defined(CONFIG_NOR) || defined(CONFIG_MTD_RAW_NAND)
|
|
gpmc_init();
|
|
#endif
|
|
shc_request_gpio();
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_BOARD_LATE_INIT
|
|
int board_late_init(void)
|
|
{
|
|
check_button_status();
|
|
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
|
|
if (shc_eeprom_valid)
|
|
if (is_valid_ethaddr(header.mac_addr))
|
|
eth_env_set_enetaddr("ethaddr", header.mac_addr);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_USB_ETHER) && \
|
|
(!defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_USB_ETHER))
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
return usb_eth_initialize(bis);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_SHOW_BOOT_PROGRESS
|
|
static void bosch_check_reset_pin(void)
|
|
{
|
|
if (readl(GPIO1_BASE + OMAP_GPIO_IRQSTATUS_SET_0) & RESET_MASK) {
|
|
printf("Resetting ...\n");
|
|
writel(RESET_MASK, GPIO1_BASE + OMAP_GPIO_IRQSTATUS_SET_0);
|
|
disable_interrupts();
|
|
reset_cpu(0);
|
|
/*NOTREACHED*/
|
|
}
|
|
}
|
|
|
|
static void hang_bosch(const char *cause, int code)
|
|
{
|
|
int lv;
|
|
|
|
gpio_direction_input(RESET_GPIO);
|
|
|
|
/* Enable reset pin interrupt on falling edge */
|
|
writel(RESET_MASK, GPIO1_BASE + OMAP_GPIO_IRQSTATUS_SET_0);
|
|
writel(RESET_MASK, GPIO1_BASE + OMAP_GPIO_FALLINGDETECT);
|
|
enable_interrupts();
|
|
|
|
puts(cause);
|
|
for (;;) {
|
|
for (lv = 0; lv < code; lv++) {
|
|
bosch_check_reset_pin();
|
|
leds_set_failure(1);
|
|
__udelay(150 * 1000);
|
|
leds_set_failure(0);
|
|
__udelay(150 * 1000);
|
|
}
|
|
#if defined(BLINK_CODE)
|
|
__udelay(300 * 1000);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
void show_boot_progress(int val)
|
|
{
|
|
switch (val) {
|
|
case BOOTSTAGE_ID_NEED_RESET:
|
|
hang_bosch("need reset", 4);
|
|
break;
|
|
}
|
|
}
|
|
|
|
void arch_preboot_os(void)
|
|
{
|
|
leds_set_finish();
|
|
}
|
|
#endif
|