u-boot/arch/arm/dts/zynq-zturn-myir.dts
Alexander Graf 584dc4095e zynq: Add Z-Turn board
The Z-Turn board is a low cost development board based on the
Xilinx Zynq SoC. While it's powerful and quite versatile, it
so far lacked upstream support.

This patch adds basic support for the Z-Turn. It does however
for now miss enablement for MIO51 reset which means that USB
and ethernet don't work. For that either FSBL or SPL need to
be adjusted. The SPL part will follow later.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-08-02 09:11:51 +02:00

161 lines
2.8 KiB
Text

/*
* Copyright (C) 2015 Andrea Merello <adnrea.merello@gmail.com>
* Copyright (C) 2017 Alexander Graf <agraf@suse.de>
*
* Based on zynq-zed.dts which is:
* Copyright (C) 2011 - 2014 Xilinx
* Copyright (C) 2012 National Instruments Corp.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/dts-v1/;
/include/ "zynq-7000.dtsi"
/ {
model = "Zynq Z-Turn MYIR Board";
compatible = "xlnx,zynq-7000";
aliases {
ethernet0 = &gem0;
serial0 = &uart1;
serial1 = &uart0;
spi0 = &qspi;
mmc0 = &sdhci0;
};
memory {
device_type = "memory";
reg = <0x0 0x40000000>;
};
chosen {
stdout-path = "serial0:115200n8";
};
gpio-leds {
compatible = "gpio-leds";
led_r {
label = "led_r";
gpios = <&gpio0 0x72 0x1>;
default-state = "on";
linux,default-trigger = "heartbeat";
};
led_g {
label = "led_g";
gpios = <&gpio0 0x73 0x1>;
default-state = "on";
linux,default-trigger = "heartbeat";
};
led_b {
label = "led_b";
gpios = <&gpio0 0x74 0x1>;
default-state = "on";
linux,default-trigger = "heartbeat";
};
usr_led1 {
label = "usr_led1";
gpios = <&gpio0 0x0 0x1>;
default-state = "off";
linux,default-trigger = "none";
};
usr_led2 {
label = "usr_led2";
gpios = <&gpio0 0x9 0x1>;
default-state = "off";
linux,default-trigger = "none";
};
};
gpio-beep {
compatible = "gpio-beeper";
label = "pl-beep";
gpios = <&gpio0 0x75 0x0>;
};
gpio-keys {
compatible = "gpio-keys";
#address-cells = <0x1>;
#size-cells = <0x0>;
autorepeat;
K1 {
label = "K1";
gpios = <&gpio0 0x32 0x1>;
linux,code = <0x66>;
gpio-key,wakeup;
autorepeat;
};
};
};
&clkc {
ps-clk-frequency = <33333333>;
fclk-enable = <0xf>;
};
&qspi {
u-boot,dm-pre-reloc;
status = "okay";
};
&gem0 {
status = "okay";
phy-mode = "rgmii-id";
phy-handle = <&ethernet_phy>;
ethernet_phy: ethernet-phy@0 {
reg = <0x0>;
};
};
&sdhci0 {
u-boot,dm-pre-reloc;
status = "okay";
};
&uart0 {
u-boot,dm-pre-reloc;
status = "okay";
};
&uart1 {
u-boot,dm-pre-reloc;
status = "okay";
};
&usb0 {
status = "okay";
dr_mode = "host";
};
&can0 {
status = "okay";
};
&i2c0 {
status = "okay";
clock-frequency = <400000>;
stlm75@49 {
status = "okay";
compatible = "lm75";
reg = <0x49>;
};
adxl345@53 {
compatible = "adi,adxl34x", "adxl34x";
reg = <0x53>;
interrupt-parent = <&intc>;
interrupts = <0x0 0x1e 0x4>;
};
};