mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-01 17:10:11 +00:00
d2c3197922
Add support for Microchip LAN7500, LAN7800 and LAN7850, USB to 10/100/1000 Ethernet Controllers. Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
315 lines
7.4 KiB
C
315 lines
7.4 KiB
C
/*
|
|
* Copyright (c) 2017 Microchip Technology Inc. All rights reserved.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <dm.h>
|
|
#include <usb.h>
|
|
#include <linux/mii.h>
|
|
#include "usb_ether.h"
|
|
#include "lan7x.h"
|
|
|
|
/* LAN75xx specific register/bit defines */
|
|
#define LAN75XX_HW_CFG_BIR BIT(7)
|
|
|
|
#define LAN75XX_BURST_CAP 0x034
|
|
|
|
#define LAN75XX_BULK_IN_DLY 0x03C
|
|
|
|
#define LAN75XX_RFE_CTL 0x060
|
|
|
|
#define LAN75XX_FCT_RX_CTL 0x090
|
|
|
|
#define LAN75XX_FCT_TX_CTL 0x094
|
|
|
|
#define LAN75XX_FCT_RX_FIFO_END 0x098
|
|
|
|
#define LAN75XX_FCT_TX_FIFO_END 0x09C
|
|
|
|
#define LAN75XX_FCT_FLOW 0x0A0
|
|
|
|
/* MAC ADDRESS PERFECT FILTER For LAN75xx */
|
|
#define LAN75XX_ADDR_FILTX 0x300
|
|
#define LAN75XX_ADDR_FILTX_FB_VALID BIT(31)
|
|
|
|
/*
|
|
* Lan75xx infrastructure commands
|
|
*/
|
|
static int lan75xx_phy_gig_workaround(struct usb_device *udev,
|
|
struct ueth_data *dev)
|
|
{
|
|
int ret = 0;
|
|
|
|
/* Only internal phy */
|
|
/* Set the phy in Gig loopback */
|
|
lan7x_mdio_write(udev, dev->phy_id, MII_BMCR,
|
|
(BMCR_LOOPBACK | BMCR_SPEED1000));
|
|
|
|
/* Wait for the link up */
|
|
ret = lan7x_mdio_wait_for_bit(udev, "BMSR_LSTATUS",
|
|
dev->phy_id, MII_BMSR, BMSR_LSTATUS,
|
|
true, PHY_CONNECT_TIMEOUT_MS, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* phy reset */
|
|
return lan7x_pmt_phy_reset(udev, dev);
|
|
}
|
|
|
|
static int lan75xx_update_flowcontrol(struct usb_device *udev,
|
|
struct ueth_data *dev)
|
|
{
|
|
uint32_t flow = 0, fct_flow = 0;
|
|
int ret;
|
|
|
|
ret = lan7x_update_flowcontrol(udev, dev, &flow, &fct_flow);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = lan7x_write_reg(udev, LAN75XX_FCT_FLOW, fct_flow);
|
|
if (ret)
|
|
return ret;
|
|
return lan7x_write_reg(udev, FLOW, flow);
|
|
}
|
|
|
|
static int lan75xx_set_receive_filter(struct usb_device *udev)
|
|
{
|
|
/* No multicast in u-boot */
|
|
return lan7x_write_reg(udev, LAN75XX_RFE_CTL,
|
|
RFE_CTL_BCAST_EN | RFE_CTL_DA_PERFECT);
|
|
}
|
|
|
|
/* starts the TX path */
|
|
static void lan75xx_start_tx_path(struct usb_device *udev)
|
|
{
|
|
/* Enable Tx at MAC */
|
|
lan7x_write_reg(udev, MAC_TX, MAC_TX_TXEN);
|
|
|
|
/* Enable Tx at SCSRs */
|
|
lan7x_write_reg(udev, LAN75XX_FCT_TX_CTL, FCT_TX_CTL_EN);
|
|
}
|
|
|
|
/* Starts the Receive path */
|
|
static void lan75xx_start_rx_path(struct usb_device *udev)
|
|
{
|
|
/* Enable Rx at MAC */
|
|
lan7x_write_reg(udev, MAC_RX,
|
|
LAN7X_MAC_RX_MAX_SIZE_DEFAULT |
|
|
MAC_RX_FCS_STRIP | MAC_RX_RXEN);
|
|
|
|
/* Enable Rx at SCSRs */
|
|
lan7x_write_reg(udev, LAN75XX_FCT_RX_CTL, FCT_RX_CTL_EN);
|
|
}
|
|
|
|
static int lan75xx_basic_reset(struct usb_device *udev,
|
|
struct ueth_data *dev,
|
|
struct lan7x_private *priv)
|
|
{
|
|
int ret;
|
|
u32 val;
|
|
|
|
ret = lan7x_basic_reset(udev, dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Keep the chip ID */
|
|
ret = lan7x_read_reg(udev, ID_REV, &val);
|
|
if (ret)
|
|
return ret;
|
|
debug("LAN75xx ID_REV = 0x%08x\n", val);
|
|
|
|
priv->chipid = (val & ID_REV_CHIP_ID_MASK) >> 16;
|
|
|
|
/* Respond to the IN token with a NAK */
|
|
ret = lan7x_read_reg(udev, HW_CFG, &val);
|
|
if (ret)
|
|
return ret;
|
|
val |= LAN75XX_HW_CFG_BIR;
|
|
return lan7x_write_reg(udev, HW_CFG, val);
|
|
}
|
|
|
|
int lan75xx_write_hwaddr(struct udevice *dev)
|
|
{
|
|
struct usb_device *udev = dev_get_parent_priv(dev);
|
|
struct eth_pdata *pdata = dev_get_platdata(dev);
|
|
unsigned char *enetaddr = pdata->enetaddr;
|
|
u32 addr_lo = get_unaligned_le32(&enetaddr[0]);
|
|
u32 addr_hi = (u32)get_unaligned_le16(&enetaddr[4]);
|
|
int ret;
|
|
|
|
/* set hardware address */
|
|
ret = lan7x_write_reg(udev, RX_ADDRL, addr_lo);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = lan7x_write_reg(udev, RX_ADDRH, addr_hi);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = lan7x_write_reg(udev, LAN75XX_ADDR_FILTX + 4, addr_lo);
|
|
if (ret)
|
|
return ret;
|
|
|
|
addr_hi |= LAN75XX_ADDR_FILTX_FB_VALID;
|
|
ret = lan7x_write_reg(udev, LAN75XX_ADDR_FILTX, addr_hi);
|
|
if (ret)
|
|
return ret;
|
|
|
|
debug("MAC addr %pM written\n", enetaddr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lan75xx_eth_start(struct udevice *dev)
|
|
{
|
|
struct usb_device *udev = dev_get_parent_priv(dev);
|
|
struct lan7x_private *priv = dev_get_priv(dev);
|
|
struct ueth_data *ueth = &priv->ueth;
|
|
int ret;
|
|
u32 write_buf;
|
|
|
|
/* Reset and read Mac addr were done in probe() */
|
|
ret = lan75xx_write_hwaddr(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = lan7x_write_reg(udev, INT_STS, 0xFFFFFFFF);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = lan7x_write_reg(udev, LAN75XX_BURST_CAP, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = lan7x_write_reg(udev, LAN75XX_BULK_IN_DLY, DEFAULT_BULK_IN_DELAY);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* set FIFO sizes */
|
|
write_buf = (MAX_RX_FIFO_SIZE - 512) / 512;
|
|
ret = lan7x_write_reg(udev, LAN75XX_FCT_RX_FIFO_END, write_buf);
|
|
if (ret)
|
|
return ret;
|
|
|
|
write_buf = (MAX_TX_FIFO_SIZE - 512) / 512;
|
|
ret = lan7x_write_reg(udev, LAN75XX_FCT_TX_FIFO_END, write_buf);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Init Tx */
|
|
ret = lan7x_write_reg(udev, FLOW, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Init Rx. Set Vlan, keep default for VLAN on 75xx */
|
|
ret = lan75xx_set_receive_filter(udev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* phy workaround for gig link */
|
|
ret = lan75xx_phy_gig_workaround(udev, ueth);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Init PHY, autonego, and link */
|
|
ret = lan7x_eth_phylib_connect(dev, &priv->ueth);
|
|
if (ret)
|
|
return ret;
|
|
ret = lan7x_eth_phylib_config_start(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* MAC_CR has to be set after PHY init.
|
|
* MAC will auto detect the PHY speed.
|
|
*/
|
|
ret = lan7x_read_reg(udev, MAC_CR, &write_buf);
|
|
if (ret)
|
|
return ret;
|
|
write_buf |= MAC_CR_AUTO_DUPLEX | MAC_CR_AUTO_SPEED | MAC_CR_ADP;
|
|
ret = lan7x_write_reg(udev, MAC_CR, write_buf);
|
|
if (ret)
|
|
return ret;
|
|
|
|
lan75xx_start_tx_path(udev);
|
|
lan75xx_start_rx_path(udev);
|
|
|
|
return lan75xx_update_flowcontrol(udev, ueth);
|
|
}
|
|
|
|
int lan75xx_read_rom_hwaddr(struct udevice *dev)
|
|
{
|
|
struct usb_device *udev = dev_get_parent_priv(dev);
|
|
struct eth_pdata *pdata = dev_get_platdata(dev);
|
|
int ret;
|
|
|
|
/*
|
|
* Refer to the doc/README.enetaddr and doc/README.usb for
|
|
* the U-Boot MAC address policy
|
|
*/
|
|
ret = lan7x_read_eeprom_mac(pdata->enetaddr, udev);
|
|
if (ret)
|
|
memset(pdata->enetaddr, 0, 6);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lan75xx_eth_probe(struct udevice *dev)
|
|
{
|
|
struct usb_device *udev = dev_get_parent_priv(dev);
|
|
struct lan7x_private *priv = dev_get_priv(dev);
|
|
struct ueth_data *ueth = &priv->ueth;
|
|
struct eth_pdata *pdata = dev_get_platdata(dev);
|
|
int ret;
|
|
|
|
/* Do a reset in order to get the MAC address from HW */
|
|
if (lan75xx_basic_reset(udev, ueth, priv))
|
|
return 0;
|
|
|
|
/* Get the MAC address */
|
|
/*
|
|
* We must set the eth->enetaddr from HW because the upper layer
|
|
* will force to use the environmental var (usbethaddr) or random if
|
|
* there is no valid MAC address in eth->enetaddr.
|
|
*
|
|
* Refer to the doc/README.enetaddr and doc/README.usb for
|
|
* the U-Boot MAC address policy
|
|
*/
|
|
lan7x_read_eeprom_mac(pdata->enetaddr, udev);
|
|
/* Do not return 0 for not finding MAC addr in HW */
|
|
|
|
ret = usb_ether_register(dev, ueth, RX_URB_SIZE);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Register phylib */
|
|
return lan7x_phylib_register(dev);
|
|
}
|
|
|
|
static const struct eth_ops lan75xx_eth_ops = {
|
|
.start = lan75xx_eth_start,
|
|
.send = lan7x_eth_send,
|
|
.recv = lan7x_eth_recv,
|
|
.free_pkt = lan7x_free_pkt,
|
|
.stop = lan7x_eth_stop,
|
|
.write_hwaddr = lan75xx_write_hwaddr,
|
|
.read_rom_hwaddr = lan75xx_read_rom_hwaddr,
|
|
};
|
|
|
|
U_BOOT_DRIVER(lan75xx_eth) = {
|
|
.name = "lan75xx_eth",
|
|
.id = UCLASS_ETH,
|
|
.probe = lan75xx_eth_probe,
|
|
.remove = lan7x_eth_remove,
|
|
.ops = &lan75xx_eth_ops,
|
|
.priv_auto_alloc_size = sizeof(struct lan7x_private),
|
|
.platdata_auto_alloc_size = sizeof(struct eth_pdata),
|
|
};
|
|
|
|
static const struct usb_device_id lan75xx_eth_id_table[] = {
|
|
{ USB_DEVICE(0x0424, 0x7500) }, /* LAN7500 USB Ethernet */
|
|
{ } /* Terminating entry */
|
|
};
|
|
|
|
U_BOOT_USB_DEVICE(lan75xx_eth, lan75xx_eth_id_table);
|