u-boot/drivers/pcmcia/mpc8xx_pcmcia.c
Simon Glass fc843a02ac Kconfig: Add a CONFIG_IDE option
At present IDE support is controlled by CONFIG_CMD_IDE. Add a separate
CONFIG_IDE option so that IDE support can be enabled without requiring
the 'ide' command.

Update existing users and move the ide driver into drivers/block since
it should not be in common/.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-22 12:45:27 -04:00

258 lines
5.6 KiB
C

#include <common.h>
#include <mpc8xx.h>
#include <pcmcia.h>
#include <linux/compiler.h>
#undef CONFIG_PCMCIA
#if defined(CONFIG_CMD_PCMCIA)
#define CONFIG_PCMCIA
#endif
#if defined(CONFIG_IDE) && defined(CONFIG_IDE_8xx_PCCARD)
#define CONFIG_PCMCIA
#endif
#if defined(CONFIG_PCMCIA)
#if defined(CONFIG_IDE_8xx_PCCARD)
extern int check_ide_device (int slot);
#endif
extern int pcmcia_hardware_enable (int slot);
extern int pcmcia_voltage_set(int slot, int vcc, int vpp);
#if defined(CONFIG_CMD_PCMCIA)
extern int pcmcia_hardware_disable(int slot);
#endif
static u_int m8xx_get_graycode(u_int size);
#if 0 /* Disabled */
static u_int m8xx_get_speed(u_int ns, u_int is_io);
#endif
/* look up table for pgcrx registers */
u_int *pcmcia_pgcrx[2] = {
&((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia.pcmc_pgcra,
&((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia.pcmc_pgcrb,
};
/*
* Search this table to see if the windowsize is
* supported...
*/
#define M8XX_SIZES_NO 32
static const u_int m8xx_size_to_gray[M8XX_SIZES_NO] =
{ 0x00000001, 0x00000002, 0x00000008, 0x00000004,
0x00000080, 0x00000040, 0x00000010, 0x00000020,
0x00008000, 0x00004000, 0x00001000, 0x00002000,
0x00000100, 0x00000200, 0x00000800, 0x00000400,
0x0fffffff, 0xffffffff, 0xffffffff, 0xffffffff,
0x01000000, 0x02000000, 0xffffffff, 0x04000000,
0x00010000, 0x00020000, 0x00080000, 0x00040000,
0x00800000, 0x00400000, 0x00100000, 0x00200000 };
/* -------------------------------------------------------------------- */
#define CONFIG_SYS_PCMCIA_TIMING ( PCMCIA_SHT(2) \
| PCMCIA_SST(4) \
| PCMCIA_SL(9))
/* -------------------------------------------------------------------- */
int pcmcia_on (void)
{
u_long reg, base;
pcmcia_win_t *win;
u_int rc, slot;
__maybe_unused u_int slotbit;
int i;
debug ("Enable PCMCIA " PCMCIA_SLOT_MSG "\n");
/* intialize the fixed memory windows */
win = (pcmcia_win_t *)(&((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia.pcmc_pbr0);
base = CONFIG_SYS_PCMCIA_MEM_ADDR;
if((reg = m8xx_get_graycode(CONFIG_SYS_PCMCIA_MEM_SIZE)) == -1) {
printf ("Cannot set window size to 0x%08x\n",
CONFIG_SYS_PCMCIA_MEM_SIZE);
return (1);
}
slotbit = PCMCIA_SLOT_x;
for (i=0; i<PCMCIA_MEM_WIN_NO; ++i) {
win->br = base;
#if (PCMCIA_SOCKETS_NO == 2)
if (i == 4) /* Another slot starting from win 4 */
slotbit = (slotbit ? PCMCIA_PSLOT_A : PCMCIA_PSLOT_B);
#endif
switch (i) {
#ifdef CONFIG_IDE_8xx_PCCARD
case 4:
case 0: { /* map attribute memory */
win->or = ( PCMCIA_BSIZE_64M
| PCMCIA_PPS_8
| PCMCIA_PRS_ATTR
| slotbit
| PCMCIA_PV
| CONFIG_SYS_PCMCIA_TIMING );
break;
}
case 5:
case 1: { /* map I/O window for data reg */
win->or = ( PCMCIA_BSIZE_1K
| PCMCIA_PPS_16
| PCMCIA_PRS_IO
| slotbit
| PCMCIA_PV
| CONFIG_SYS_PCMCIA_TIMING );
break;
}
case 6:
case 2: { /* map I/O window for cmd/ctrl reg block */
win->or = ( PCMCIA_BSIZE_1K
| PCMCIA_PPS_8
| PCMCIA_PRS_IO
| slotbit
| PCMCIA_PV
| CONFIG_SYS_PCMCIA_TIMING );
break;
}
#endif /* CONFIG_IDE_8xx_PCCARD */
default: /* set to not valid */
win->or = 0;
break;
}
debug ("MemWin %d: PBR 0x%08lX POR %08lX\n",
i, win->br, win->or);
base += CONFIG_SYS_PCMCIA_MEM_SIZE;
++win;
}
for (i=0, rc=0, slot=_slot_; i<PCMCIA_SOCKETS_NO; i++, slot = !slot) {
/* turn off voltage */
if ((rc = pcmcia_voltage_set(slot, 0, 0)))
continue;
/* Enable external hardware */
if ((rc = pcmcia_hardware_enable(slot)))
continue;
#ifdef CONFIG_IDE_8xx_PCCARD
if ((rc = check_ide_device(i)))
continue;
#endif
}
return rc;
}
#if defined(CONFIG_CMD_PCMCIA)
int pcmcia_off (void)
{
int i;
pcmcia_win_t *win;
printf ("Disable PCMCIA " PCMCIA_SLOT_MSG "\n");
/* clear interrupt state, and disable interrupts */
((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia.pcmc_pscr = PCMCIA_MASK(_slot_);
((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia.pcmc_per &= ~PCMCIA_MASK(_slot_);
/* turn off interrupt and disable CxOE */
PCMCIA_PGCRX(_slot_) = __MY_PCMCIA_GCRX_CXOE;
/* turn off memory windows */
win = (pcmcia_win_t *)(&((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia.pcmc_pbr0);
for (i=0; i<PCMCIA_MEM_WIN_NO; ++i) {
/* disable memory window */
win->or = 0;
++win;
}
/* turn off voltage */
pcmcia_voltage_set(_slot_, 0, 0);
/* disable external hardware */
printf ("Shutdown and Poweroff " PCMCIA_SLOT_MSG "\n");
pcmcia_hardware_disable(_slot_);
return 0;
}
#endif
static u_int m8xx_get_graycode(u_int size)
{
u_int k;
for (k = 0; k < M8XX_SIZES_NO; k++) {
if(m8xx_size_to_gray[k] == size)
break;
}
if((k == M8XX_SIZES_NO) || (m8xx_size_to_gray[k] == -1))
k = -1;
return k;
}
#if 0
static u_int m8xx_get_speed(u_int ns, u_int is_io)
{
u_int reg, clocks, psst, psl, psht;
if(!ns) {
/*
* We get called with IO maps setup to 0ns
* if not specified by the user.
* They should be 255ns.
*/
if(is_io)
ns = 255;
else
ns = 100; /* fast memory if 0 */
}
/*
* In PSST, PSL, PSHT fields we tell the controller
* timing parameters in CLKOUT clock cycles.
* CLKOUT is the same as GCLK2_50.
*/
/* how we want to adjust the timing - in percent */
#define ADJ 180 /* 80 % longer accesstime - to be sure */
clocks = ((M8XX_BUSFREQ / 1000) * ns) / 1000;
clocks = (clocks * ADJ) / (100*1000);
if(clocks >= PCMCIA_BMT_LIMIT) {
DEBUG(0, "Max access time limit reached\n");
clocks = PCMCIA_BMT_LIMIT-1;
}
psst = clocks / 7; /* setup time */
psht = clocks / 7; /* hold time */
psl = (clocks * 5) / 7; /* strobe length */
psst += clocks - (psst + psht + psl);
reg = psst << 12;
reg |= psl << 7;
reg |= psht << 16;
return reg;
}
#endif /* 0 */
#endif /* CONFIG_PCMCIA */