u-boot/arch/arm/mach-rockchip/rk3036-board-spl.c
Heiko Stübner aade077e43 rockchip: Move bootrom-related declarations to a header
So far spl-boards have declared the back_to_brom() function as simple
extern in the files themself. That doesn't scale well if every boards
defines this on its own.
Therefore move the declarations to a bootrom header.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Kever Yang <kever.yang@rock-chips.com>
2017-03-16 16:03:44 -06:00

61 lines
1.2 KiB
C

/*
* (C) Copyright 2015 Rockchip Electronics Co., Ltd
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <debug_uart.h>
#include <asm/io.h>
#include <asm/arch/bootrom.h>
#include <asm/arch/grf_rk3036.h>
#include <asm/arch/hardware.h>
#include <asm/arch/sdram_rk3036.h>
#include <asm/arch/timer.h>
#include <asm/arch/uart.h>
DECLARE_GLOBAL_DATA_PTR;
#define GRF_BASE 0x20008000
static struct rk3036_grf * const grf = (void *)GRF_BASE;
#define DEBUG_UART_BASE 0x20068000
void board_init_f(ulong dummy)
{
#ifdef EARLY_DEBUG
/*
* NOTE: sd card and debug uart use same iomux in rk3036,
* so if you enable uart,
* you can not boot from sdcard
*/
rk_clrsetreg(&grf->gpio1c_iomux,
GPIO1C3_MASK << GPIO1C3_SHIFT |
GPIO1C2_MASK << GPIO1C2_SHIFT,
GPIO1C3_UART2_SOUT << GPIO1C3_SHIFT |
GPIO1C2_UART2_SIN << GPIO1C2_SHIFT);
debug_uart_init();
#endif
rockchip_timer_init();
sdram_init();
/* return to maskrom */
back_to_bootrom();
}
/* Place Holders */
void board_init_r(gd_t *id, ulong dest_addr)
{
/*
* Function attribute is no-return
* This Function never executes
*/
while (1)
;
}
void hang(void)
{
while (1)
;
}