mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 08:57:58 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
362 lines
8 KiB
C
362 lines
8 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2013-2015 Arcturus Networks, Inc.
|
|
* http://www.arcturusnetworks.com/products/ucp1020/
|
|
* by Oleksandr G Zhadan et al.
|
|
* based on board/freescale/p1_p2_rdb_pc/spl.c
|
|
* original copyright follows:
|
|
* Copyright 2013 Freescale Semiconductor, Inc.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <hwconfig.h>
|
|
#include <pci.h>
|
|
#include <i2c.h>
|
|
#include <miiphy.h>
|
|
#include <linux/libfdt.h>
|
|
#include <fdt_support.h>
|
|
#include <fsl_mdio.h>
|
|
#include <tsec.h>
|
|
#include <ioports.h>
|
|
#include <netdev.h>
|
|
#include <micrel.h>
|
|
#include <spi_flash.h>
|
|
#include <mmc.h>
|
|
#include <linux/ctype.h>
|
|
#include <asm/fsl_serdes.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/mmu.h>
|
|
#include <asm/cache.h>
|
|
#include <asm/immap_85xx.h>
|
|
#include <asm/fsl_pci.h>
|
|
#include <fsl_ddr_sdram.h>
|
|
#include <asm/io.h>
|
|
#include <asm/fsl_law.h>
|
|
#include <asm/fsl_lbc.h>
|
|
#include <asm/mp.h>
|
|
#include "ucp1020.h"
|
|
|
|
void spi_set_speed(struct spi_slave *slave, uint hz)
|
|
{
|
|
/* TO DO: It's actially have to be in spi/ */
|
|
}
|
|
|
|
/*
|
|
* To be compatible with cmd_gpio
|
|
*/
|
|
int name_to_gpio(const char *name)
|
|
{
|
|
int gpio = 31 - simple_strtoul(name, NULL, 10);
|
|
|
|
if (gpio < 16)
|
|
gpio = -1;
|
|
|
|
return gpio;
|
|
}
|
|
|
|
void board_gpio_init(void)
|
|
{
|
|
int i;
|
|
char envname[8], *val;
|
|
|
|
for (i = 0; i < GPIO_MAX_NUM; i++) {
|
|
sprintf(envname, "GPIO%d", i);
|
|
val = env_get(envname);
|
|
if (val) {
|
|
char direction = toupper(val[0]);
|
|
char level = toupper(val[1]);
|
|
|
|
if (direction == 'I') {
|
|
gpio_direction_input(i);
|
|
} else {
|
|
if (direction == 'O') {
|
|
if (level == '1')
|
|
gpio_direction_output(i, 1);
|
|
else
|
|
gpio_direction_output(i, 0);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
val = env_get("PCIE_OFF");
|
|
if (val) {
|
|
gpio_direction_input(GPIO_PCIE1_EN);
|
|
gpio_direction_input(GPIO_PCIE2_EN);
|
|
} else {
|
|
gpio_direction_output(GPIO_PCIE1_EN, 1);
|
|
gpio_direction_output(GPIO_PCIE2_EN, 1);
|
|
}
|
|
|
|
val = env_get("SDHC_CDWP_OFF");
|
|
if (!val) {
|
|
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
|
|
setbits_be32(&gur->pmuxcr,
|
|
(MPC85xx_PMUXCR_SDHC_CD | MPC85xx_PMUXCR_SDHC_WP));
|
|
}
|
|
}
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
return 0; /* Just in case. Could be disable in config file */
|
|
}
|
|
|
|
int checkboard(void)
|
|
{
|
|
printf("Board: %s\n", CONFIG_BOARDNAME_LOCAL);
|
|
board_gpio_init();
|
|
printf("SD/MMC: 4-bit Mode\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PCI
|
|
void pci_init_board(void)
|
|
{
|
|
fsl_pcie_init_board(0);
|
|
}
|
|
#endif
|
|
|
|
int board_early_init_r(void)
|
|
{
|
|
const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
|
|
const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
|
|
|
|
/*
|
|
* Remap Boot flash region to caching-inhibited
|
|
* so that flash can be erased properly.
|
|
*/
|
|
|
|
/* Flush d-cache and invalidate i-cache of any FLASH data */
|
|
flush_dcache();
|
|
invalidate_icache();
|
|
|
|
/* invalidate existing TLB entry for flash */
|
|
disable_tlb(flash_esel);
|
|
|
|
set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, /* tlb, epn, rpn */
|
|
MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, /* perms, wimge */
|
|
0, flash_esel, BOOKE_PAGESZ_64M, 1);/* ts, esel, tsize, iprot */
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_phy_config(struct phy_device *phydev)
|
|
{
|
|
#if defined(CONFIG_PHY_MICREL_KSZ9021)
|
|
int regval;
|
|
static int cnt;
|
|
|
|
if (cnt++ == 0)
|
|
printf("PHYs address [");
|
|
|
|
if (phydev->addr == TSEC1_PHY_ADDR || phydev->addr == TSEC3_PHY_ADDR) {
|
|
regval =
|
|
ksz9021_phy_extended_read(phydev,
|
|
MII_KSZ9021_EXT_STRAP_STATUS);
|
|
/*
|
|
* min rx data delay
|
|
*/
|
|
ksz9021_phy_extended_write(phydev,
|
|
MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW,
|
|
0x6666);
|
|
/*
|
|
* max rx/tx clock delay, min rx/tx control
|
|
*/
|
|
ksz9021_phy_extended_write(phydev,
|
|
MII_KSZ9021_EXT_RGMII_CLOCK_SKEW,
|
|
0xf6f6);
|
|
printf("0x%x", (regval & 0x1f));
|
|
} else {
|
|
printf("0x%x", (TSEC2_PHY_ADDR & 0x1f));
|
|
}
|
|
if (cnt == 3)
|
|
printf("] ");
|
|
else
|
|
printf(",");
|
|
#endif
|
|
|
|
#if defined(CONFIG_PHY_MICREL_KSZ9031_DEBUG)
|
|
regval = ksz9031_phy_extended_read(phydev, 2, 0x01, 0x4000);
|
|
if (regval >= 0)
|
|
printf(" (ADDR 0x%x) ", regval & 0x1f);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
int last_stage_init(void)
|
|
{
|
|
static char newkernelargs[256];
|
|
static u8 id1[16];
|
|
static u8 id2;
|
|
struct mmc *mmc;
|
|
char *sval, *kval;
|
|
|
|
if (i2c_read(CONFIG_SYS_I2C_IDT6V49205B, 7, 1, &id1[0], 2) < 0) {
|
|
printf("Error reading i2c IDT6V49205B information!\n");
|
|
} else {
|
|
printf("IDT6V49205B(0x%02x): ready\n", id1[1]);
|
|
i2c_read(CONFIG_SYS_I2C_IDT6V49205B, 4, 1, &id1[0], 2);
|
|
if (!(id1[1] & 0x02)) {
|
|
id1[1] |= 0x02;
|
|
i2c_write(CONFIG_SYS_I2C_IDT6V49205B, 4, 1, &id1[0], 2);
|
|
asm("nop; nop");
|
|
}
|
|
}
|
|
|
|
if (i2c_read(CONFIG_SYS_I2C_NCT72_ADDR, 0xFE, 1, &id2, 1) < 0)
|
|
printf("Error reading i2c NCT72 information!\n");
|
|
else
|
|
printf("NCT72(0x%x): ready\n", id2);
|
|
|
|
kval = env_get("kernelargs");
|
|
|
|
mmc = find_mmc_device(0);
|
|
if (mmc)
|
|
if (!mmc_init(mmc)) {
|
|
printf("MMC/SD card detected\n");
|
|
if (kval) {
|
|
int n = strlen(defkargs);
|
|
char *tmp = strstr(kval, defkargs);
|
|
|
|
*tmp = 0;
|
|
strcpy(newkernelargs, kval);
|
|
strcat(newkernelargs, " ");
|
|
strcat(newkernelargs, mmckargs);
|
|
strcat(newkernelargs, " ");
|
|
strcat(newkernelargs, &tmp[n]);
|
|
env_set("kernelargs", newkernelargs);
|
|
} else {
|
|
env_set("kernelargs", mmckargs);
|
|
}
|
|
}
|
|
get_arc_info();
|
|
|
|
if (kval) {
|
|
sval = env_get("SERIAL");
|
|
if (sval) {
|
|
strcpy(newkernelargs, "SN=");
|
|
strcat(newkernelargs, sval);
|
|
strcat(newkernelargs, " ");
|
|
strcat(newkernelargs, kval);
|
|
env_set("kernelargs", newkernelargs);
|
|
}
|
|
} else {
|
|
printf("Error reading kernelargs env variable!\n");
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
struct fsl_pq_mdio_info mdio_info;
|
|
struct tsec_info_struct tsec_info[4];
|
|
#ifdef CONFIG_TSEC2
|
|
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
#endif
|
|
int num = 0;
|
|
|
|
#ifdef CONFIG_TSEC1
|
|
SET_STD_TSEC_INFO(tsec_info[num], 1);
|
|
num++;
|
|
#endif
|
|
#ifdef CONFIG_TSEC2
|
|
SET_STD_TSEC_INFO(tsec_info[num], 2);
|
|
if (is_serdes_configured(SGMII_TSEC2)) {
|
|
if (!(in_be32(&gur->pordevsr) & MPC85xx_PORDEVSR_SGMII2_DIS)) {
|
|
puts("eTSEC2 is in sgmii mode.\n");
|
|
tsec_info[num].flags |= TSEC_SGMII;
|
|
tsec_info[num].phyaddr = TSEC2_PHY_ADDR_SGMII;
|
|
}
|
|
}
|
|
num++;
|
|
#endif
|
|
#ifdef CONFIG_TSEC3
|
|
SET_STD_TSEC_INFO(tsec_info[num], 3);
|
|
num++;
|
|
#endif
|
|
|
|
if (!num) {
|
|
printf("No TSECs initialized\n");
|
|
return 0;
|
|
}
|
|
|
|
mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
|
|
mdio_info.name = DEFAULT_MII_NAME;
|
|
|
|
fsl_pq_mdio_init(bis, &mdio_info);
|
|
|
|
tsec_eth_init(bis, tsec_info, num);
|
|
|
|
return pci_eth_init(bis);
|
|
}
|
|
|
|
#ifdef CONFIG_OF_BOARD_SETUP
|
|
int ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
phys_addr_t base;
|
|
phys_size_t size;
|
|
const char *soc_usb_compat = "fsl-usb2-dr";
|
|
int err, usb1_off, usb2_off;
|
|
|
|
ft_cpu_setup(blob, bd);
|
|
|
|
base = env_get_bootm_low();
|
|
size = env_get_bootm_size();
|
|
|
|
fdt_fixup_memory(blob, (u64)base, (u64)size);
|
|
|
|
FT_FSL_PCI_SETUP;
|
|
|
|
#if defined(CONFIG_HAS_FSL_DR_USB)
|
|
fsl_fdt_fixup_dr_usb(blob, bd);
|
|
#endif
|
|
|
|
#if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH)
|
|
/* Delete eLBC node as it is muxed with USB2 controller */
|
|
if (hwconfig("usb2")) {
|
|
const char *soc_elbc_compat = "fsl,p1020-elbc";
|
|
int off = fdt_node_offset_by_compatible(blob, -1,
|
|
soc_elbc_compat);
|
|
if (off < 0) {
|
|
printf
|
|
("WARNING: could not find compatible node %s: %s\n",
|
|
soc_elbc_compat, fdt_strerror(off));
|
|
return off;
|
|
}
|
|
err = fdt_del_node(blob, off);
|
|
if (err < 0) {
|
|
printf("WARNING: could not remove %s: %s\n",
|
|
soc_elbc_compat, fdt_strerror(err));
|
|
}
|
|
return err;
|
|
}
|
|
#endif
|
|
|
|
/* Delete USB2 node as it is muxed with eLBC */
|
|
usb1_off = fdt_node_offset_by_compatible(blob, -1, soc_usb_compat);
|
|
if (usb1_off < 0) {
|
|
printf("WARNING: could not find compatible node %s: %s.\n",
|
|
soc_usb_compat, fdt_strerror(usb1_off));
|
|
return usb1_off;
|
|
}
|
|
usb2_off =
|
|
fdt_node_offset_by_compatible(blob, usb1_off, soc_usb_compat);
|
|
if (usb2_off < 0) {
|
|
printf("WARNING: could not find compatible node %s: %s.\n",
|
|
soc_usb_compat, fdt_strerror(usb2_off));
|
|
return usb2_off;
|
|
}
|
|
err = fdt_del_node(blob, usb2_off);
|
|
if (err < 0) {
|
|
printf("WARNING: could not remove %s: %s.\n",
|
|
soc_usb_compat, fdt_strerror(err));
|
|
}
|
|
return 0;
|
|
}
|
|
#endif
|