mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-03 01:50:25 +00:00
c360ceac02
- support mirrored DIMMs, not support register DIMMs - test passed on P2020DS board with MT9JSF12872AY-1G1D1 - test passed on MPC8569MDS board with MT8JSF12864HY-1G1D1 Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Travis Wheatley <travis.wheatley@freescale.com>
314 lines
7.9 KiB
C
314 lines
7.9 KiB
C
/*
|
|
* Copyright (C) 2008 Freescale Semiconductor, Inc.
|
|
* Dave Liu <daveliu@freescale.com>
|
|
*
|
|
* calculate the organization and timing parameter
|
|
* from ddr3 spd, please refer to the spec
|
|
* JEDEC standard No.21-C 4_01_02_11R18.pdf
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* Version 2 as published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/fsl_ddr_sdram.h>
|
|
|
|
#include "ddr.h"
|
|
|
|
/*
|
|
* Calculate the Density of each Physical Rank.
|
|
* Returned size is in bytes.
|
|
*
|
|
* each rank size =
|
|
* sdram capacity(bit) / 8 * primary bus width / sdram width
|
|
*
|
|
* where: sdram capacity = spd byte4[3:0]
|
|
* primary bus width = spd byte8[2:0]
|
|
* sdram width = spd byte7[2:0]
|
|
*
|
|
* SPD byte4 - sdram density and banks
|
|
* bit[3:0] size(bit) size(byte)
|
|
* 0000 256Mb 32MB
|
|
* 0001 512Mb 64MB
|
|
* 0010 1Gb 128MB
|
|
* 0011 2Gb 256MB
|
|
* 0100 4Gb 512MB
|
|
* 0101 8Gb 1GB
|
|
* 0110 16Gb 2GB
|
|
*
|
|
* SPD byte8 - module memory bus width
|
|
* bit[2:0] primary bus width
|
|
* 000 8bits
|
|
* 001 16bits
|
|
* 010 32bits
|
|
* 011 64bits
|
|
*
|
|
* SPD byte7 - module organiztion
|
|
* bit[2:0] sdram device width
|
|
* 000 4bits
|
|
* 001 8bits
|
|
* 010 16bits
|
|
* 011 32bits
|
|
*
|
|
*/
|
|
static phys_size_t
|
|
compute_ranksize(const ddr3_spd_eeprom_t *spd)
|
|
{
|
|
phys_size_t bsize;
|
|
|
|
int nbit_sdram_cap_bsize = 0;
|
|
int nbit_primary_bus_width = 0;
|
|
int nbit_sdram_width = 0;
|
|
|
|
if ((spd->density_banks & 0xf) < 7)
|
|
nbit_sdram_cap_bsize = (spd->density_banks & 0xf) + 28;
|
|
if ((spd->bus_width & 0x7) < 4)
|
|
nbit_primary_bus_width = (spd->bus_width & 0x7) + 3;
|
|
if ((spd->organization & 0x7) < 4)
|
|
nbit_sdram_width = (spd->organization & 0x7) + 2;
|
|
|
|
bsize = 1 << (nbit_sdram_cap_bsize - 3
|
|
+ nbit_primary_bus_width - nbit_sdram_width);
|
|
|
|
debug("DDR: DDR III rank density = 0x%08x\n", bsize);
|
|
|
|
return bsize;
|
|
}
|
|
|
|
/*
|
|
* ddr_compute_dimm_parameters for DDR3 SPD
|
|
*
|
|
* Compute DIMM parameters based upon the SPD information in spd.
|
|
* Writes the results to the dimm_params_t structure pointed by pdimm.
|
|
*
|
|
*/
|
|
unsigned int
|
|
ddr_compute_dimm_parameters(const ddr3_spd_eeprom_t *spd,
|
|
dimm_params_t *pdimm,
|
|
unsigned int dimm_number)
|
|
{
|
|
unsigned int retval;
|
|
unsigned int mtb_ps;
|
|
|
|
if (spd->mem_type) {
|
|
if (spd->mem_type != SPD_MEMTYPE_DDR3) {
|
|
printf("DIMM %u: is not a DDR3 SPD.\n", dimm_number);
|
|
return 1;
|
|
}
|
|
} else {
|
|
memset(pdimm, 0, sizeof(dimm_params_t));
|
|
return 1;
|
|
}
|
|
|
|
retval = ddr3_spd_check(spd);
|
|
if (retval) {
|
|
printf("DIMM %u: failed checksum\n", dimm_number);
|
|
return 2;
|
|
}
|
|
|
|
/*
|
|
* The part name in ASCII in the SPD EEPROM is not null terminated.
|
|
* Guarantee null termination here by presetting all bytes to 0
|
|
* and copying the part name in ASCII from the SPD onto it
|
|
*/
|
|
memset(pdimm->mpart, 0, sizeof(pdimm->mpart));
|
|
memcpy(pdimm->mpart, spd->mpart, sizeof(pdimm->mpart) - 1);
|
|
|
|
/* DIMM organization parameters */
|
|
pdimm->n_ranks = ((spd->organization >> 3) & 0x7) + 1;
|
|
pdimm->rank_density = compute_ranksize(spd);
|
|
pdimm->capacity = pdimm->n_ranks * pdimm->rank_density;
|
|
pdimm->primary_sdram_width = 1 << (3 + (spd->bus_width & 0x7));
|
|
if ((spd->bus_width >> 3) & 0x3)
|
|
pdimm->ec_sdram_width = 8;
|
|
else
|
|
pdimm->ec_sdram_width = 0;
|
|
pdimm->data_width = pdimm->primary_sdram_width
|
|
+ pdimm->ec_sdram_width;
|
|
|
|
switch (spd->module_type & 0xf) {
|
|
case 0x01: /* RDIMM */
|
|
case 0x05: /* Mini-RDIMM */
|
|
pdimm->registered_dimm = 1; /* register buffered */
|
|
break;
|
|
|
|
case 0x02: /* UDIMM */
|
|
case 0x03: /* SO-DIMM */
|
|
case 0x04: /* Micro-DIMM */
|
|
case 0x06: /* Mini-UDIMM */
|
|
pdimm->registered_dimm = 0; /* unbuffered */
|
|
break;
|
|
|
|
default:
|
|
printf("unknown dimm_type 0x%02X\n", spd->module_type);
|
|
return 1;
|
|
}
|
|
|
|
/* SDRAM device parameters */
|
|
pdimm->n_row_addr = ((spd->addressing >> 3) & 0x7) + 12;
|
|
pdimm->n_col_addr = (spd->addressing & 0x7) + 9;
|
|
pdimm->n_banks_per_sdram_device = 8 << ((spd->density_banks >> 4) & 0x7);
|
|
|
|
/*
|
|
* The SPD spec has not the ECC bit,
|
|
* We consider the DIMM as ECC capability
|
|
* when the extension bus exist
|
|
*/
|
|
if (pdimm->ec_sdram_width)
|
|
pdimm->edc_config = 0x02;
|
|
else
|
|
pdimm->edc_config = 0x00;
|
|
|
|
/*
|
|
* The SPD spec has not the burst length byte
|
|
* but DDR3 spec has nature BL8 and BC4,
|
|
* BL8 -bit3, BC4 -bit2
|
|
*/
|
|
pdimm->burst_lengths_bitmask = 0x0c;
|
|
pdimm->row_density = __ilog2(pdimm->rank_density);
|
|
|
|
/* MTB - medium timebase
|
|
* The unit in the SPD spec is ns,
|
|
* We convert it to ps.
|
|
* eg: MTB = 0.125ns (125ps)
|
|
*/
|
|
mtb_ps = (spd->mtb_dividend * 1000) /spd->mtb_divisor;
|
|
pdimm->mtb_ps = mtb_ps;
|
|
|
|
/*
|
|
* sdram minimum cycle time
|
|
* we assume the MTB is 0.125ns
|
|
* eg:
|
|
* tCK_min=15 MTB (1.875ns) ->DDR3-1066
|
|
* =12 MTB (1.5ns) ->DDR3-1333
|
|
* =10 MTB (1.25ns) ->DDR3-1600
|
|
*/
|
|
pdimm->tCKmin_X_ps = spd->tCK_min * mtb_ps;
|
|
|
|
/*
|
|
* CAS latency supported
|
|
* bit4 - CL4
|
|
* bit5 - CL5
|
|
* bit18 - CL18
|
|
*/
|
|
pdimm->caslat_X = ((spd->caslat_msb << 8) | spd->caslat_lsb) << 4;
|
|
|
|
/*
|
|
* min CAS latency time
|
|
* eg: tAA_min =
|
|
* DDR3-800D 100 MTB (12.5ns)
|
|
* DDR3-1066F 105 MTB (13.125ns)
|
|
* DDR3-1333H 108 MTB (13.5ns)
|
|
* DDR3-1600H 90 MTB (11.25ns)
|
|
*/
|
|
pdimm->tAA_ps = spd->tAA_min * mtb_ps;
|
|
|
|
/*
|
|
* min write recovery time
|
|
* eg:
|
|
* tWR_min = 120 MTB (15ns) -> all speed grades.
|
|
*/
|
|
pdimm->tWR_ps = spd->tWR_min * mtb_ps;
|
|
|
|
/*
|
|
* min RAS to CAS delay time
|
|
* eg: tRCD_min =
|
|
* DDR3-800 100 MTB (12.5ns)
|
|
* DDR3-1066F 105 MTB (13.125ns)
|
|
* DDR3-1333H 108 MTB (13.5ns)
|
|
* DDR3-1600H 90 MTB (11.25)
|
|
*/
|
|
pdimm->tRCD_ps = spd->tRCD_min * mtb_ps;
|
|
|
|
/*
|
|
* min row active to row active delay time
|
|
* eg: tRRD_min =
|
|
* DDR3-800(1KB page) 80 MTB (10ns)
|
|
* DDR3-1333(1KB page) 48 MTB (6ns)
|
|
*/
|
|
pdimm->tRRD_ps = spd->tRRD_min * mtb_ps;
|
|
|
|
/*
|
|
* min row precharge delay time
|
|
* eg: tRP_min =
|
|
* DDR3-800D 100 MTB (12.5ns)
|
|
* DDR3-1066F 105 MTB (13.125ns)
|
|
* DDR3-1333H 108 MTB (13.5ns)
|
|
* DDR3-1600H 90 MTB (11.25ns)
|
|
*/
|
|
pdimm->tRP_ps = spd->tRP_min * mtb_ps;
|
|
|
|
/* min active to precharge delay time
|
|
* eg: tRAS_min =
|
|
* DDR3-800D 300 MTB (37.5ns)
|
|
* DDR3-1066F 300 MTB (37.5ns)
|
|
* DDR3-1333H 288 MTB (36ns)
|
|
* DDR3-1600H 280 MTB (35ns)
|
|
*/
|
|
pdimm->tRAS_ps = (((spd->tRAS_tRC_ext & 0xf) << 8) | spd->tRAS_min_lsb)
|
|
* mtb_ps;
|
|
/*
|
|
* min active to actice/refresh delay time
|
|
* eg: tRC_min =
|
|
* DDR3-800D 400 MTB (50ns)
|
|
* DDR3-1066F 405 MTB (50.625ns)
|
|
* DDR3-1333H 396 MTB (49.5ns)
|
|
* DDR3-1600H 370 MTB (46.25ns)
|
|
*/
|
|
pdimm->tRC_ps = (((spd->tRAS_tRC_ext & 0xf0) << 4) | spd->tRC_min_lsb)
|
|
* mtb_ps;
|
|
/*
|
|
* min refresh recovery delay time
|
|
* eg: tRFC_min =
|
|
* 512Mb 720 MTB (90ns)
|
|
* 1Gb 880 MTB (110ns)
|
|
* 2Gb 1280 MTB (160ns)
|
|
*/
|
|
pdimm->tRFC_ps = ((spd->tRFC_min_msb << 8) | spd->tRFC_min_lsb)
|
|
* mtb_ps;
|
|
/*
|
|
* min internal write to read command delay time
|
|
* eg: tWTR_min = 40 MTB (7.5ns) - all speed bins.
|
|
* tWRT is at least 4 mclk independent of operating freq.
|
|
*/
|
|
pdimm->tWTR_ps = spd->tWTR_min * mtb_ps;
|
|
|
|
/*
|
|
* min internal read to precharge command delay time
|
|
* eg: tRTP_min = 40 MTB (7.5ns) - all speed bins.
|
|
* tRTP is at least 4 mclk independent of operating freq.
|
|
*/
|
|
pdimm->tRTP_ps = spd->tRTP_min * mtb_ps;
|
|
|
|
/*
|
|
* Average periodic refresh interval
|
|
* tREFI = 7.8 us at normal temperature range
|
|
* = 3.9 us at ext temperature range
|
|
*/
|
|
pdimm->refresh_rate_ps = 7800000;
|
|
|
|
/*
|
|
* min four active window delay time
|
|
* eg: tFAW_min =
|
|
* DDR3-800(1KB page) 320 MTB (40ns)
|
|
* DDR3-1066(1KB page) 300 MTB (37.5ns)
|
|
* DDR3-1333(1KB page) 240 MTB (30ns)
|
|
* DDR3-1600(1KB page) 240 MTB (30ns)
|
|
*/
|
|
pdimm->tFAW_ps = (((spd->tFAW_msb & 0xf) << 8) | spd->tFAW_min)
|
|
* mtb_ps;
|
|
|
|
/*
|
|
* We need check the address mirror for unbuffered DIMM
|
|
* If SPD indicate the address map mirror, The DDR controller
|
|
* need care it.
|
|
*/
|
|
if ((spd->module_type == SPD_MODULETYPE_UDIMM) ||
|
|
(spd->module_type == SPD_MODULETYPE_SODIMM) ||
|
|
(spd->module_type == SPD_MODULETYPE_MICRODIMM) ||
|
|
(spd->module_type == SPD_MODULETYPE_MINIUDIMM))
|
|
pdimm->mirrored_dimm = spd->mod_section.unbuffered.addr_mapping & 0x1;
|
|
|
|
return 0;
|
|
}
|