Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-22 11:13:07 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/board/freescale/common/diu_ch7301.c
Igor Opaniuk 2147a16983 dm: i2c: use CONFIG_IS_ENABLED macro for DM_I2C/DM_I2C_GPIO 
Use CONFIG_IS_ENABLED() macro, which provides more convenient
way to check $(SPL)DM_I2C/$(SPL)DM_I2C_GPIO configs
for both SPL and U-Boot proper.

CONFIG_IS_ENABLED(DM_I2C) expands to:
- 1 if CONFIG_SPL_BUILD is undefined and CONFIG_DM_I2C is set to 'y',
- 1 if CONFIG_SPL_BUILD is defined and CONFIG_SPL_DM_I2C is set to 'y',
- 0 otherwise.

All occurences were replaced automatically using these bash cmds:
$ find . -type f -exec sed -i
     's/ifndef CONFIG_DM_I2C/if !CONFIG_IS_ENABLED(DM_I2C)/g' {} +
$ find . -type f -exec sed -i
    's/ifdef CONFIG_DM_I2C/if CONFIG_IS_ENABLED(DM_I2C)/g' {} +
$ find . -type f -exec sed -i
    's/defined(CONFIG_DM_I2C)/CONFIG_IS_ENABLED(DM_I2C)/g' {} +
$ find . -type f -exec sed -i
    's/ifndef CONFIG_DM_I2C_GPIO/if !CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} +
$ find . -type f -exec sed -i
    's/ifdef CONFIG_DM_I2C_GPIO/if CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} +
$ find . -type f -exec sed -i
    's/defined(CONFIG_DM_I2C_GPIO)/CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} +

Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-21 06:08:00 +01:00

217 lines
6.1 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2014 Freescale Semiconductor, Inc.
* Copyright 2019 NXP
* Authors: Priyanka Jain <Priyanka.Jain@freescale.com>
* Wang Dongsheng <dongsheng.wang@freescale.com>
*
* This file is copied and modified from the original t1040qds/diu.c.
* Encoder can be used in T104x and LSx Platform.
*/
#include <common.h>
#include <stdio_dev.h>
#include <i2c.h>
#include <linux/delay.h>
#define I2C_DVI_INPUT_DATA_FORMAT_REG 0x1F
#define I2C_DVI_PLL_CHARGE_CNTL_REG 0x33
#define I2C_DVI_PLL_DIVIDER_REG 0x34
#define I2C_DVI_PLL_SUPPLY_CNTL_REG 0x35
#define I2C_DVI_PLL_FILTER_REG 0x36
#define I2C_DVI_TEST_PATTERN_REG 0x48
#define I2C_DVI_POWER_MGMT_REG 0x49
#define I2C_DVI_LOCK_STATE_REG 0x4D
#define I2C_DVI_SYNC_POLARITY_REG 0x56
/*
* Set VSYNC/HSYNC to active high. This is polarity of sync signals
* from DIU->DVI. The DIU default is active igh, so DVI is set to
* active high.
*/
#define I2C_DVI_INPUT_DATA_FORMAT_VAL 0x98
#define I2C_DVI_PLL_CHARGE_CNTL_HIGH_SPEED_VAL 0x06
#define I2C_DVI_PLL_DIVIDER_HIGH_SPEED_VAL 0x26
#define I2C_DVI_PLL_FILTER_HIGH_SPEED_VAL 0xA0
#define I2C_DVI_PLL_CHARGE_CNTL_LOW_SPEED_VAL 0x08
#define I2C_DVI_PLL_DIVIDER_LOW_SPEED_VAL 0x16
#define I2C_DVI_PLL_FILTER_LOW_SPEED_VAL 0x60
/* Clear test pattern */
#define I2C_DVI_TEST_PATTERN_VAL 0x18
/* Exit Power-down mode */
#define I2C_DVI_POWER_MGMT_VAL 0xC0
/* Monitor polarity is handled via DVI Sync Polarity Register */
#define I2C_DVI_SYNC_POLARITY_VAL 0x00
/* Programming of HDMI Chrontel CH7301 connector */
int diu_set_dvi_encoder(unsigned int pixclock)
{
int ret;
u8 temp;
temp = I2C_DVI_TEST_PATTERN_VAL;
#if CONFIG_IS_ENABLED(DM_I2C)
struct udevice *dev;
ret = i2c_get_chip_for_busnum(CONFIG_SYS_I2C_DVI_BUS_NUM,
CONFIG_SYS_I2C_DVI_ADDR,
1, &dev);
if (ret) {
printf("%s: Cannot find udev for a bus %d\n", __func__,
CONFIG_SYS_I2C_DVI_BUS_NUM);
return ret;
}
ret = dm_i2c_write(dev, I2C_DVI_TEST_PATTERN_REG, &temp, 1);
if (ret) {
puts("I2C: failed to select proper dvi test pattern\n");
return ret;
}
temp = I2C_DVI_INPUT_DATA_FORMAT_VAL;
ret = dm_i2c_write(dev, I2C_DVI_INPUT_DATA_FORMAT_REG, &temp, 1);
if (ret) {
puts("I2C: failed to select dvi input data format\n");
return ret;
}
/* Set Sync polarity register */
temp = I2C_DVI_SYNC_POLARITY_VAL;
ret = dm_i2c_write(dev, I2C_DVI_SYNC_POLARITY_REG, &temp, 1);
if (ret) {
puts("I2C: failed to select dvi syc polarity\n");
return ret;
}
/* Set PLL registers based on pixel clock rate*/
if (pixclock > 65000000) {
temp = I2C_DVI_PLL_CHARGE_CNTL_HIGH_SPEED_VAL;
ret = dm_i2c_write(dev, I2C_DVI_PLL_CHARGE_CNTL_REG, &temp, 1);
if (ret) {
puts("I2C: failed to select dvi pll charge_cntl\n");
return ret;
}
temp = I2C_DVI_PLL_DIVIDER_HIGH_SPEED_VAL;
ret = dm_i2c_write(dev, I2C_DVI_PLL_DIVIDER_REG, &temp, 1);
if (ret) {
puts("I2C: failed to select dvi pll divider\n");
return ret;
}
temp = I2C_DVI_PLL_FILTER_HIGH_SPEED_VAL;
ret = dm_i2c_write(dev, I2C_DVI_PLL_FILTER_REG, &temp, 1);
if (ret) {
puts("I2C: failed to select dvi pll filter\n");
return ret;
}
} else {
temp = I2C_DVI_PLL_CHARGE_CNTL_LOW_SPEED_VAL;
ret = dm_i2c_write(dev, I2C_DVI_PLL_CHARGE_CNTL_REG, &temp, 1);
if (ret) {
puts("I2C: failed to select dvi pll charge_cntl\n");
return ret;
}
temp = I2C_DVI_PLL_DIVIDER_LOW_SPEED_VAL;
ret = dm_i2c_write(dev, I2C_DVI_PLL_DIVIDER_REG, &temp, 1);
if (ret) {
puts("I2C: failed to select dvi pll divider\n");
return ret;
}
temp = I2C_DVI_PLL_FILTER_LOW_SPEED_VAL;
ret = dm_i2c_write(dev, I2C_DVI_PLL_FILTER_REG, &temp, 1);
if (ret) {
puts("I2C: failed to select dvi pll filter\n");
return ret;
}
}
temp = I2C_DVI_POWER_MGMT_VAL;
ret = dm_i2c_write(dev, I2C_DVI_POWER_MGMT_REG, &temp, 1);
if (ret) {
puts("I2C: failed to select dvi power mgmt\n");
return ret;
}
#else
ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR, I2C_DVI_TEST_PATTERN_REG, 1,
&temp, 1);
if (ret) {
puts("I2C: failed to select proper dvi test pattern\n");
return ret;
}
temp = I2C_DVI_INPUT_DATA_FORMAT_VAL;
ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR, I2C_DVI_INPUT_DATA_FORMAT_REG,
1, &temp, 1);
if (ret) {
puts("I2C: failed to select dvi input data format\n");
return ret;
}
/* Set Sync polarity register */
temp = I2C_DVI_SYNC_POLARITY_VAL;
ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR, I2C_DVI_SYNC_POLARITY_REG, 1,
&temp, 1);
if (ret) {
puts("I2C: failed to select dvi syc polarity\n");
return ret;
}
/* Set PLL registers based on pixel clock rate*/
if (pixclock > 65000000) {
temp = I2C_DVI_PLL_CHARGE_CNTL_HIGH_SPEED_VAL;
ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR,
I2C_DVI_PLL_CHARGE_CNTL_REG, 1, &temp, 1);
if (ret) {
puts("I2C: failed to select dvi pll charge_cntl\n");
return ret;
}
temp = I2C_DVI_PLL_DIVIDER_HIGH_SPEED_VAL;
ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR,
I2C_DVI_PLL_DIVIDER_REG, 1, &temp, 1);
if (ret) {
puts("I2C: failed to select dvi pll divider\n");
return ret;
}
temp = I2C_DVI_PLL_FILTER_HIGH_SPEED_VAL;
ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR,
I2C_DVI_PLL_FILTER_REG, 1, &temp, 1);
if (ret) {
puts("I2C: failed to select dvi pll filter\n");
return ret;
}
} else {
temp = I2C_DVI_PLL_CHARGE_CNTL_LOW_SPEED_VAL;
ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR,
I2C_DVI_PLL_CHARGE_CNTL_REG, 1, &temp, 1);
if (ret) {
puts("I2C: failed to select dvi pll charge_cntl\n");
return ret;
}
temp = I2C_DVI_PLL_DIVIDER_LOW_SPEED_VAL;
ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR,
I2C_DVI_PLL_DIVIDER_REG, 1, &temp, 1);
if (ret) {
puts("I2C: failed to select dvi pll divider\n");
return ret;
}
temp = I2C_DVI_PLL_FILTER_LOW_SPEED_VAL;
ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR,
I2C_DVI_PLL_FILTER_REG, 1, &temp, 1);
if (ret) {
puts("I2C: failed to select dvi pll filter\n");
return ret;
}
}
temp = I2C_DVI_POWER_MGMT_VAL;
ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR, I2C_DVI_POWER_MGMT_REG, 1,
&temp, 1);
if (ret) {
puts("I2C: failed to select dvi power mgmt\n");
return ret;
}
#endif
udelay(500);
return 0;
}
Reference in a new issue View git blame Copy permalink