u-boot/arch/arm/dts/rk3399-roc-pc-u-boot.dtsi
Hugh Cole-Baker acc57ecf05 rockchip: rk3399-roc-pc: default to SPI bus 1 for SPI-flash
SPI flash on this board is located on bus 1, default to using bus 1 for
SPI flash on both rk3399-roc-pc and -mezzanine, and stop aliasing it to
bus 0.

Signed-off-by: Hugh Cole-Baker <sigmaris@gmail.com>
Suggested-by: Simon Glass <sjg@chromium.org>
Fixes: c4cea2bb ("rockchip: Enable building a SPI ROM image on bob")
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2021-01-21 11:53:25 +08:00

64 lines
1.1 KiB
Text

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2019 Levin Du <djw@t-chip.com.cn>
*/
#include "rk3399-u-boot.dtsi"
#include "rk3399-sdram-lpddr4-100.dtsi"
/ {
chosen {
u-boot,spl-boot-order = "same-as-spl", &spi_flash, &sdhci, &sdmmc;
};
config {
u-boot,spl-payload-offset = <0x60000>; /* @ 384KB */
};
vcc_hub_en: vcc_hub_en-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&hub_rst>;
regulator-name = "vcc_hub_en";
regulator-always-on;
};
};
/*
* should be placed inside mp8859, but not until mp8859 has
* its own dt-binding.
*/
&dc_12v {
compatible = "regulator-fixed";
regulator-name = "dc_12v";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
vin-supply = <&vcc_vbus_typec0>;
};
&spi1 {
spi_flash: flash@0 {
u-boot,dm-pre-reloc;
};
};
&vdd_log {
regulator-min-microvolt = <430000>;
regulator-init-microvolt = <950000>;
};
&vcc5v0_host {
regulator-always-on;
};
&vcc_sys {
regulator-always-on;
};
&vcc_sdio {
regulator-always-on;
};