u-boot/arch/arm/dts/cn9132-db.dtsi
Konstantin Porotchkin f29eaadeb5 arm: octeontx2: Add dtsi/dts files for Octeon TX2 CN913x DB
This patch adds the dtsi/dts files needed to support the Marvell
Octeon TX2 CN913x DB. This is only the base port with not all
interfaces supported fully.

Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2021-05-16 06:48:45 +02:00

217 lines
4.6 KiB
Text

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2018-2021 Marvell International Ltd.
*/
#undef CP110_NAME
#undef CP110_NUM
#undef CP110_PCIE_MEM_SIZE
#undef CP110_PCIEx_CPU_MEM_BASE
#undef CP110_PCIEx_BUS_MEM_BASE
/* CP110-2 Settings */
#define CP110_NAME cp2
#define CP110_NUM 2
#define CP110_PCIE_MEM_SIZE(iface) (0xf00000)
#define CP110_PCIEx_CPU_MEM_BASE(iface) (0xe5000000 + (iface) * 0x1000000)
#define CP110_PCIEx_BUS_MEM_BASE(iface) (CP110_PCIEx_CPU_MEM_BASE(iface))
#include "armada-cp110.dtsi"
/ {
model = "Marvell CN9132 development board";
compatible = "marvell,cn9132-db";
aliases {
gpio5 = &cp2_gpio0;
gpio6 = &cp2_gpio1;
};
cp2 {
config-space {
sdhci@780000 {
vqmmc-supply = <&cp2_reg_sd_vccq>;
};
cp2_reg_usb3_vbus0: cp2_usb3_vbus@0 {
compatible = "regulator-fixed";
regulator-name = "cp2-xhci0-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
startup-delay-us = <100000>;
regulator-force-boot-off;
gpio = <&cp2_gpio0 2 GPIO_ACTIVE_HIGH>;
};
cp2_reg_usb3_vbus1: cp2_usb3_vbus@1 {
compatible = "regulator-fixed";
regulator-name = "cp2-xhci1-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
startup-delay-us = <100000>;
regulator-force-boot-off;
gpio = <&cp2_gpio0 3 GPIO_ACTIVE_HIGH>;
};
cp2_reg_sd_vccq: cp2_sd_vccq@0 {
compatible = "regulator-gpio";
regulator-name = "cp2_sd_vcc";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
/* cp2_mpp49 */
gpios = <&cp2_gpio1 17 GPIO_ACTIVE_HIGH>;
states = <1800000 0x1
3300000 0x0>;
};
cp2_reg_usb3_current_lim0: cp2_usb3_current_limiter@0 {
compatible = "regulator-fixed";
regulator-min-microamp = <900000>;
regulator-max-microamp = <900000>;
regulator-force-boot-off;
gpio = <&cp2_gpio0 0 GPIO_ACTIVE_HIGH>;
};
cp2_reg_usb3_current_lim1: cp2_usb3_current_limiter@1 {
compatible = "regulator-fixed";
regulator-min-microamp = <900000>;
regulator-max-microamp = <900000>;
regulator-force-boot-off;
gpio = <&cp2_gpio0 1 GPIO_ACTIVE_HIGH>;
};
};
};
};
&cp2_i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&cp2_i2c0_pins>;
status = "okay";
clock-frequency = <100000>;
};
&cp2_pinctl {
compatible = "marvell,mvebu-pinctrl",
"marvell,cp115-standalone-pinctrl";
bank-name ="cp2-110";
/* MPP Bus:
* [0-26] GPIO
* [27] SATA0_PRESENT_ACTIVEn
* [28] SATA1_PRESENT_ACTIVEn
* [29-31, 33] GPIO (Default)
* [32,34] SMI
* [37-38] I2C0
* [39-53] GPIO
* [54] SD_CRD_RSTn (out)
* [55] SD_CRD_DT (in)
* [56-62] SDIO
*/
/* 0 1 2 3 4 5 6 7 8 9 */
pin-func = < 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x9 0x9 0x0
0x0 0x0 0x8 0x0 0x8 0x0 0x0 0x2 0x2 0x0
0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0 0x0 0x0 0xa 0xb 0xe 0xe 0xe 0xe
0xe 0xe 0xe >;
cp2_i2c0_pins: cp2-i2c-pins-0 {
marvell,pins = < 37 38 >;
marvell,function = <2>;
};
cp2_sdhci_pins: cp2-sdhi-pins-0 {
marvell,pins = < 56 57 58 59 60 61 >;
marvell,function = <14>;
};
};
&cp2_usb3_0 {
status = "okay";
vbus-supply = <&cp2_reg_usb3_vbus0>;
current-limiter = <&cp2_reg_usb3_current_lim0>;
vbus-disable-delay = <500>;
};
/* SLM-1521-V2, CON11 */
&cp2_usb3_1 {
status = "okay";
vbus-supply = <&cp2_reg_usb3_vbus1>;
current-limiter = <&cp2_reg_usb3_current_lim1>;
vbus-disable-delay = <500>;
status = "okay";
};
&cp2_utmi0 {
status = "okay";
};
&cp2_utmi1 {
status = "okay";
};
&cp2_comphy {
phy0 {
phy-type = <COMPHY_TYPE_PEX0>;
};
phy1 {
phy-type = <COMPHY_TYPE_PEX0>;
};
phy2 {
phy-type = <COMPHY_TYPE_SATA0>;
};
phy3 {
phy-type = <COMPHY_TYPE_USB3_HOST1>;
};
phy4 {
phy-type = <COMPHY_TYPE_SFI0>;
phy-speed = <COMPHY_SPEED_10_3125G>;
};
phy5 {
phy-type = <COMPHY_TYPE_PEX2>;
};
};
&cp2_ethernet {
status = "okay";
};
/* SLM-1521-V2, CON9 */
&cp2_eth0 {
status = "okay";
phy-mode = "sfi";
};
/* SLM-1521-V2, CON6 */
&cp2_pcie0 {
/* non-prefetchable memory */
ranges =<0x82000000 0 0xe5000000 0 0xe5000000 0 0x1000000>;
num-lanes = <2>;
status = "okay";
};
/* SLM-1521-V2, CON8 */
&cp2_pcie2 {
num-lanes = <1>;
status = "okay";
};
&cp2_pinctl {
};
/* SLM-1521-V2, CON4 */
&cp2_sata0 {
status = "okay";
};
/* CON 2 on SLM-1683 - microSD */
&cp2_sdhci0 {
pinctrl-names = "default";
pinctrl-0 = <&cp2_sdhci_pins>;
bus-width = <4>;
status = "okay";
};