mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 02:38:56 +00:00
ae6b03fefc
The P3060QDS is a Freescale reference board for the six-core P3060 SOC. P3060QDS Board Overview: Memory subsystem: - 2G Bytes unbuffered DDR3 SDRAM SO-DIMM(64bit bus) - 128M Bytes NOR flash single-chip memory - 16M Bytes SPI flash - 8K Bytes AT24C64 I2C EEPROM for RCW Ethernet: - Eight Ethernet controllers (4x1G + 4x1G/2.5G) - Three VSC8641 PHYs on board (2xRGMII + 1xMII) - Suport multiple Vitesse VSC8234 SGMII Cards in Slot1/2/3 PCIe: Two PCI Express 2.0 controllers/ports USB: Two USB2.0, USB1(TYPE-A) and USB2(TYPE-AB) on board I2C: Four I2C controllers UART: Supports two dUARTs up to 115200 bps for console RapidIO: Two RapidIO, sRIO1 and sRIO2 Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
101 lines
2.5 KiB
C
101 lines
2.5 KiB
C
/*
|
|
* Copyright 2011 Freescale Semiconductor
|
|
* Author: Shengzhou Liu <Shengzhou.Liu@freescale.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the Free
|
|
* Software Foundation; either version 2 of the License, or (at your option)
|
|
* any later version.
|
|
*
|
|
* This file provides support for the QIXIS of some Freescale reference boards.
|
|
*/
|
|
|
|
#ifndef __QIXIS_H_
|
|
#define __QIXIS_H_
|
|
|
|
struct qixis {
|
|
u8 id; /* ID value uniquely identifying each QDS board type */
|
|
u8 arch; /* Board version information */
|
|
u8 scver; /* QIXIS Version Register */
|
|
u8 model; /* Information of software programming model version */
|
|
u8 tagdata;
|
|
u8 ctl_sys;
|
|
u8 aux; /* Auxiliary Register,0x06 */
|
|
u8 clk_spd;
|
|
u8 stat_dut;
|
|
u8 stat_sys;
|
|
u8 stat_alrm;
|
|
u8 present;
|
|
u8 ctl_sys2;
|
|
u8 rcw_ctl;
|
|
u8 ctl_led;
|
|
u8 i2cblk;
|
|
u8 rcfg_ctl; /* Reconfig Control Register,0x10 */
|
|
u8 rcfg_st;
|
|
u8 dcm_ad;
|
|
u8 dcm_da;
|
|
u8 dcmd;
|
|
u8 dmsg;
|
|
u8 gdc;
|
|
u8 gdd; /* DCM Debug Data Register,0x17 */
|
|
u8 dmack;
|
|
u8 res1[6];
|
|
u8 watch; /* Watchdog Register,0x1F */
|
|
u8 pwr_ctl[2]; /* Power Control Register,0x20 */
|
|
u8 res2[2];
|
|
u8 pwr_stat[4]; /* Power Status Register,0x24 */
|
|
u8 res3[8];
|
|
u8 clk_spd2[2]; /* SYSCLK clock Speed Register,0x30 */
|
|
u8 res4[2];
|
|
u8 sclk[3]; /* Clock Configuration Registers,0x34 */
|
|
u8 res5;
|
|
u8 dclk[3];
|
|
u8 res6;
|
|
u8 clk_dspd[3];
|
|
u8 res7;
|
|
u8 rst_ctl; /* Reset Control Register,0x40 */
|
|
u8 rst_stat; /* Reset Status Register */
|
|
u8 rst_rsn; /* Reset Reason Register */
|
|
u8 rst_frc[2]; /* Reset Force Registers,0x43 */
|
|
u8 res8[11];
|
|
u8 brdcfg[16]; /* Board Configuration Register,0x50 */
|
|
u8 dutcfg[16];
|
|
u8 rcw_ad[2]; /* RCW SRAM Address Registers,0x70 */
|
|
u8 rcw_data;
|
|
u8 res9[5];
|
|
u8 post_ctl;
|
|
u8 post_stat;
|
|
u8 post_dat[2];
|
|
u8 pi_d[4];
|
|
u8 gpio_io[4];
|
|
u8 gpio_dir[4];
|
|
u8 res10[20];
|
|
u8 rjtag_ctl;
|
|
u8 rjtag_dat;
|
|
u8 res11[2];
|
|
u8 trig_src[4];
|
|
u8 trig_dst[4];
|
|
u8 trig_stat;
|
|
u8 res12[3];
|
|
u8 trig_ctr[4];
|
|
u8 res13[48];
|
|
u8 aux2[4]; /* Auxiliary Registers,0xE0 */
|
|
u8 res14[10];
|
|
u8 aux_ad;
|
|
u8 aux_da;
|
|
u8 res15[16];
|
|
};
|
|
|
|
#define QIXIS_BASE 0xffdf0000
|
|
#define QIXIS_LBMAP_SWITCH 7
|
|
#define QIXIS_LBMAP_MASK 0x0f
|
|
#define QIXIS_LBMAP_SHIFT 0
|
|
#define QIXIS_LBMAP_ALTBANK 0x04
|
|
|
|
u8 qixis_read(unsigned int reg);
|
|
void qixis_write(unsigned int reg, u8 value);
|
|
|
|
#define QIXIS_READ(reg) qixis_read(offsetof(struct qixis, reg))
|
|
#define QIXIS_WRITE(reg, value) qixis_write(offsetof(struct qixis, reg), value)
|
|
|
|
#endif
|