mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-16 01:38:22 +00:00
dbe2fcb87d
Add vrefbuf device tree node. This allows to get a voltage reference for ADCs. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
380 lines
8.3 KiB
Text
380 lines
8.3 KiB
Text
/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
|
|
/*
|
|
* Copyright (C) STMicroelectronics 2018 - All Rights Reserved
|
|
*/
|
|
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/clock/stm32mp1-clks.h>
|
|
#include <dt-bindings/reset-controller/stm32mp1-resets.h>
|
|
|
|
/ {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu0: cpu@0 {
|
|
compatible = "arm,cortex-a7";
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
};
|
|
|
|
cpu1: cpu@1 {
|
|
compatible = "arm,cortex-a7";
|
|
device_type = "cpu";
|
|
reg = <1>;
|
|
};
|
|
};
|
|
|
|
aliases {
|
|
serial3 = &uart4;
|
|
};
|
|
|
|
intc: interrupt-controller@a0021000 {
|
|
compatible = "arm,cortex-a7-gic";
|
|
#interrupt-cells = <3>;
|
|
interrupt-controller;
|
|
reg = <0xa0021000 0x1000>,
|
|
<0xa0022000 0x2000>;
|
|
};
|
|
|
|
clocks {
|
|
clk_hse: clk-hse {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <24000000>;
|
|
};
|
|
|
|
clk_hsi: clk-hsi {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <64000000>;
|
|
};
|
|
|
|
clk_lse: clk-lse {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <32768>;
|
|
};
|
|
|
|
clk_lsi: clk-lsi {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <32000>;
|
|
};
|
|
|
|
clk_csi: clk-csi {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <4000000>;
|
|
};
|
|
};
|
|
|
|
soc {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
interrupt-parent = <&intc>;
|
|
ranges;
|
|
|
|
uart4: serial@40010000 {
|
|
compatible = "st,stm32h7-uart";
|
|
reg = <0x40010000 0x400>;
|
|
clocks = <&rcc_clk UART4_K>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sdmmc3: sdmmc@48004000 {
|
|
compatible = "st,stm32-sdmmc2";
|
|
reg = <0x48004000 0x400>, <0x48005000 0x400>;
|
|
reg-names = "sdmmc", "delay";
|
|
interrupts = <GIC_SPI 137 IRQ_TYPE_NONE>;
|
|
clocks = <&rcc_clk SDMMC3_K>;
|
|
resets = <&rcc_rst SDMMC3_R>;
|
|
st,idma = <1>;
|
|
cap-sd-highspeed;
|
|
cap-mmc-highspeed;
|
|
max-frequency = <120000000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
rcc: rcc@50000000 {
|
|
compatible = "syscon", "simple-mfd";
|
|
|
|
reg = <0x50000000 0x1000>;
|
|
|
|
rcc_clk: rcc-clk@50000000 {
|
|
#clock-cells = <1>;
|
|
compatible = "st,stm32mp1-rcc-clk";
|
|
};
|
|
|
|
rcc_rst: rcc-reset@50000000 {
|
|
#reset-cells = <1>;
|
|
compatible = "st,stm32mp1-rcc-rst";
|
|
};
|
|
|
|
rcc_reboot: rcc-reboot@50000000 {
|
|
compatible = "syscon-reboot";
|
|
regmap = <&rcc>;
|
|
offset = <0x404>;
|
|
mask = <0x1>;
|
|
};
|
|
};
|
|
|
|
pwr: pwr@50001000 {
|
|
compatible = "st,stm32mp1-pwr", "st,stm32-pwr", "syscon", "simple-mfd";
|
|
reg = <0x50001000 0x400>;
|
|
system-power-controller;
|
|
interrupts = <GIC_SPI 149 IRQ_TYPE_NONE>;
|
|
st,sysrcc = <&rcc>;
|
|
clocks = <&rcc_clk PLL2_R>;
|
|
clock-names = "phyclk";
|
|
|
|
pwr-regulators@c {
|
|
compatible = "st,stm32mp1,pwr-reg";
|
|
st,tzcr = <&rcc 0x0 0x1>;
|
|
|
|
reg11: reg11 {
|
|
regulator-name = "reg11";
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
};
|
|
|
|
reg18: reg18 {
|
|
regulator-name = "reg18";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
usb33: usb33 {
|
|
regulator-name = "usb33";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
vrefbuf: vrefbuf@50025000 {
|
|
compatible = "st,stm32-vrefbuf";
|
|
reg = <0x50025000 0x8>;
|
|
regulator-min-microvolt = <1500000>;
|
|
regulator-max-microvolt = <2500000>;
|
|
clocks = <&rcc_clk VREF>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pinctrl: pin-controller {
|
|
compatible = "st,stm32mp157-pinctrl";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x50002000 0xa400>;
|
|
pins-are-numbered;
|
|
|
|
gpioa: gpio@50002000 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x0 0x400>;
|
|
clocks = <&rcc_clk GPIOA>;
|
|
st,bank-name = "GPIOA";
|
|
ngpios = <16>;
|
|
gpio-ranges = <&pinctrl 0 0 16>;
|
|
status = "disabled";
|
|
};
|
|
|
|
gpiob: gpio@50003000 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x1000 0x400>;
|
|
clocks = <&rcc_clk GPIOB>;
|
|
st,bank-name = "GPIOB";
|
|
ngpios = <16>;
|
|
gpio-ranges = <&pinctrl 0 16 16>;
|
|
status = "disabled";
|
|
};
|
|
|
|
gpioc: gpio@50004000 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x2000 0x400>;
|
|
clocks = <&rcc_clk GPIOC>;
|
|
st,bank-name = "GPIOC";
|
|
ngpios = <16>;
|
|
gpio-ranges = <&pinctrl 0 32 16>;
|
|
status = "disabled";
|
|
};
|
|
|
|
gpiod: gpio@50005000 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x3000 0x400>;
|
|
clocks = <&rcc_clk GPIOD>;
|
|
st,bank-name = "GPIOD";
|
|
ngpios = <16>;
|
|
gpio-ranges = <&pinctrl 0 48 16>;
|
|
status = "disabled";
|
|
};
|
|
|
|
gpioe: gpio@50006000 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x4000 0x400>;
|
|
clocks = <&rcc_clk GPIOE>;
|
|
st,bank-name = "GPIOE";
|
|
ngpios = <16>;
|
|
gpio-ranges = <&pinctrl 0 64 16>;
|
|
status = "disabled";
|
|
};
|
|
|
|
gpiof: gpio@50007000 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x5000 0x400>;
|
|
clocks = <&rcc_clk GPIOF>;
|
|
st,bank-name = "GPIOF";
|
|
ngpios = <16>;
|
|
gpio-ranges = <&pinctrl 0 80 16>;
|
|
status = "disabled";
|
|
};
|
|
|
|
gpiog: gpio@50008000 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x6000 0x400>;
|
|
clocks = <&rcc_clk GPIOG>;
|
|
st,bank-name = "GPIOG";
|
|
ngpios = <16>;
|
|
gpio-ranges = <&pinctrl 0 96 16>;
|
|
status = "disabled";
|
|
};
|
|
|
|
gpioh: gpio@50009000 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x7000 0x400>;
|
|
clocks = <&rcc_clk GPIOH>;
|
|
st,bank-name = "GPIOH";
|
|
ngpios = <16>;
|
|
gpio-ranges = <&pinctrl 0 112 16>;
|
|
status = "disabled";
|
|
};
|
|
|
|
gpioi: gpio@5000a000 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x8000 0x400>;
|
|
clocks = <&rcc_clk GPIOI>;
|
|
st,bank-name = "GPIOI";
|
|
ngpios = <16>;
|
|
gpio-ranges = <&pinctrl 0 128 16>;
|
|
status = "disabled";
|
|
};
|
|
|
|
gpioj: gpio@5000b000 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x9000 0x400>;
|
|
clocks = <&rcc_clk GPIOJ>;
|
|
st,bank-name = "GPIOJ";
|
|
ngpios = <16>;
|
|
gpio-ranges = <&pinctrl 0 144 16>;
|
|
status = "disabled";
|
|
};
|
|
|
|
gpiok: gpio@5000c000 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0xa000 0x400>;
|
|
clocks = <&rcc_clk GPIOK>;
|
|
st,bank-name = "GPIOK";
|
|
ngpios = <8>;
|
|
gpio-ranges = <&pinctrl 0 160 8>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
pinctrl_z: pin-controller-z {
|
|
compatible = "st,stm32mp157-z-pinctrl";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x54004000 0x400>;
|
|
pins-are-numbered;
|
|
|
|
gpioz: gpio@54004000 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0 0x400>;
|
|
clocks = <&rcc_clk GPIOZ>;
|
|
st,bank-name = "GPIOZ";
|
|
st,bank-ioport = <11>;
|
|
ngpios = <8>;
|
|
gpio-ranges = <&pinctrl_z 0 400 8>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
sdmmc1: sdmmc@58005000 {
|
|
compatible = "st,stm32-sdmmc2";
|
|
reg = <0x58005000 0x1000>, <0x58006000 0x1000>;
|
|
reg-names = "sdmmc", "delay";
|
|
clocks = <&rcc_clk SDMMC1_K>;
|
|
resets = <&rcc_rst SDMMC1_R>;
|
|
st,idma = <1>;
|
|
cap-sd-highspeed;
|
|
cap-mmc-highspeed;
|
|
max-frequency = <120000000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sdmmc2: sdmmc@58007000 {
|
|
compatible = "st,stm32-sdmmc2";
|
|
reg = <0x58007000 0x1000>, <0x58008000 0x1000>;
|
|
reg-names = "sdmmc", "delay";
|
|
interrupts = <GIC_SPI 124 IRQ_TYPE_NONE>;
|
|
clocks = <&rcc_clk SDMMC2_K>;
|
|
resets = <&rcc_rst SDMMC2_R>;
|
|
st,idma = <1>;
|
|
cap-sd-highspeed;
|
|
cap-mmc-highspeed;
|
|
max-frequency = <120000000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c4: i2c@5c002000 {
|
|
compatible = "st,stm32f7-i2c";
|
|
reg = <0x5c002000 0x400>;
|
|
interrupt-names = "event", "error", "wakeup";
|
|
clocks = <&rcc_clk I2C4_K>;
|
|
resets = <&rcc_rst I2C4_R>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
wakeup-source;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|