mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 02:38:56 +00:00
aa42cb71fa
Add code for configuring VSC3316/3308 crosspoint switches
Add README to understand the APIs
- VSC 3316/3308 is a low-power, low-cost asynchronous crosspoint switch
capable of data rates upto 11.5Gbps. VSC3316 has 16 input and 16
output ports whereas VSC3308 has 8 input and 8 output ports.
Programming of these devices are performed by two-wire or four-wire
serial interface.
Signed-off-by: Shaveta Leekha <shaveta@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
184 lines
5.2 KiB
C
184 lines
5.2 KiB
C
/*
|
|
* Copyright 2012 Freescale Semiconductor, Inc.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include "vsc3316_3308.h"
|
|
|
|
#define REVISION_ID_REG 0x7E
|
|
#define INTERFACE_MODE_REG 0x79
|
|
#define CURRENT_PAGE_REGISTER 0x7F
|
|
#define CONNECTION_CONFIG_PAGE 0x00
|
|
#define INPUT_STATE_REG 0x13
|
|
#define GLOBAL_INPUT_ISE1 0x51
|
|
#define GLOBAL_INPUT_ISE2 0x52
|
|
#define GLOBAL_INPUT_LOS 0x55
|
|
#define GLOBAL_CORE_CNTRL 0x5D
|
|
#define OUTPUT_MODE_PAGE 0x23
|
|
#define CORE_CONTROL_PAGE 0x25
|
|
#define CORE_CONFIG_REG 0x75
|
|
|
|
int vsc_if_enable(unsigned int vsc_addr)
|
|
{
|
|
u8 data;
|
|
|
|
debug("VSC:Configuring VSC at I2C address 0x%2x"
|
|
" for 2-wire interface\n", vsc_addr);
|
|
|
|
/* enable 2-wire Serial InterFace (I2C) */
|
|
data = 0x02;
|
|
return i2c_write(vsc_addr, INTERFACE_MODE_REG, 1, &data, 1);
|
|
}
|
|
|
|
int vsc3316_config(unsigned int vsc_addr, const int8_t con_arr[][2],
|
|
unsigned int num_con)
|
|
{
|
|
unsigned int i;
|
|
u8 rev_id = 0;
|
|
int ret;
|
|
|
|
debug("VSC:Initializing VSC3316 at I2C address 0x%2x"
|
|
" for Tx\n", vsc_addr);
|
|
|
|
ret = i2c_read(vsc_addr, REVISION_ID_REG, 1, &rev_id, 1);
|
|
if (ret < 0) {
|
|
printf("VSC:0x%x could not read REV_ID from device.\n",
|
|
vsc_addr);
|
|
return ret;
|
|
}
|
|
|
|
if (rev_id != 0xab) {
|
|
printf("VSC: device at address 0x%x is not VSC3316/3308.\n",
|
|
vsc_addr);
|
|
return -ENODEV;
|
|
}
|
|
|
|
ret = vsc_if_enable(vsc_addr);
|
|
if (ret) {
|
|
printf("VSC:0x%x could not configured for 2-wire I/F.\n",
|
|
vsc_addr);
|
|
return ret;
|
|
}
|
|
|
|
/* config connections - page 0x00 */
|
|
i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, CONNECTION_CONFIG_PAGE);
|
|
|
|
/* Making crosspoint connections, by connecting required
|
|
* input to output */
|
|
for (i = 0; i < num_con ; i++)
|
|
i2c_reg_write(vsc_addr, con_arr[i][1], con_arr[i][0]);
|
|
|
|
/* input state - page 0x13 */
|
|
i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, INPUT_STATE_REG);
|
|
/* Configuring the required input of the switch */
|
|
for (i = 0; i < num_con ; i++)
|
|
i2c_reg_write(vsc_addr, con_arr[i][0], 0x80);
|
|
|
|
/* Setting Global Input LOS threshold value */
|
|
i2c_reg_write(vsc_addr, GLOBAL_INPUT_LOS, 0x60);
|
|
|
|
/* config output mode - page 0x23 */
|
|
i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, OUTPUT_MODE_PAGE);
|
|
/* Turn ON the Output driver correspond to required output*/
|
|
for (i = 0; i < num_con ; i++)
|
|
i2c_reg_write(vsc_addr, con_arr[i][1], 0);
|
|
|
|
/* configure global core control register, Turn on Global core power */
|
|
i2c_reg_write(vsc_addr, GLOBAL_CORE_CNTRL, 0);
|
|
|
|
vsc_wp_config(vsc_addr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int vsc3308_config(unsigned int vsc_addr, const int8_t con_arr[][2],
|
|
unsigned int num_con)
|
|
{
|
|
unsigned int i;
|
|
u8 rev_id = 0;
|
|
int ret;
|
|
|
|
debug("VSC:Initializing VSC3308 at I2C address 0x%x"
|
|
" for Tx\n", vsc_addr);
|
|
|
|
ret = i2c_read(vsc_addr, REVISION_ID_REG, 1, &rev_id, 1);
|
|
if (ret < 0) {
|
|
printf("VSC:0x%x could not read REV_ID from device.\n",
|
|
vsc_addr);
|
|
return ret;
|
|
}
|
|
|
|
if (rev_id != 0xab) {
|
|
printf("VSC: device at address 0x%x is not VSC3316/3308.\n",
|
|
vsc_addr);
|
|
return -ENODEV;
|
|
}
|
|
|
|
ret = vsc_if_enable(vsc_addr);
|
|
if (ret) {
|
|
printf("VSC:0x%x could not configured for 2-wire I/F.\n",
|
|
vsc_addr);
|
|
return ret;
|
|
}
|
|
|
|
/* config connections - page 0x00 */
|
|
i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, CONNECTION_CONFIG_PAGE);
|
|
|
|
/* Making crosspoint connections, by connecting required
|
|
* input to output */
|
|
for (i = 0; i < num_con ; i++)
|
|
i2c_reg_write(vsc_addr, con_arr[i][1], con_arr[i][0]);
|
|
|
|
/*Configure Global Input ISE and gain */
|
|
i2c_reg_write(vsc_addr, GLOBAL_INPUT_ISE1, 0x12);
|
|
i2c_reg_write(vsc_addr, GLOBAL_INPUT_ISE2, 0x12);
|
|
|
|
/* input state - page 0x13 */
|
|
i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, INPUT_STATE_REG);
|
|
/* Turning ON the required input of the switch */
|
|
for (i = 0; i < num_con ; i++)
|
|
i2c_reg_write(vsc_addr, con_arr[i][0], 0);
|
|
|
|
/* Setting Global Input LOS threshold value */
|
|
i2c_reg_write(vsc_addr, GLOBAL_INPUT_LOS, 0x60);
|
|
|
|
/* config output mode - page 0x23 */
|
|
i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, OUTPUT_MODE_PAGE);
|
|
/* Turn ON the Output driver correspond to required output*/
|
|
for (i = 0; i < num_con ; i++)
|
|
i2c_reg_write(vsc_addr, con_arr[i][1], 0);
|
|
|
|
/* configure global core control register, Turn on Global core power */
|
|
i2c_reg_write(vsc_addr, GLOBAL_CORE_CNTRL, 0);
|
|
|
|
vsc_wp_config(vsc_addr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void vsc_wp_config(unsigned int vsc_addr)
|
|
{
|
|
debug("VSC:Configuring VSC at address:0x%x for WP\n", vsc_addr);
|
|
|
|
/* For new crosspoint configuration to occur, WP bit of
|
|
* CORE_CONFIG_REG should be set 1 and then reset to 0 */
|
|
i2c_reg_write(vsc_addr, CORE_CONFIG_REG, 0x01);
|
|
i2c_reg_write(vsc_addr, CORE_CONFIG_REG, 0x0);
|
|
}
|