u-boot/board/armltd/vexpress64/pcie.c
Pali Rohár ca4b097d7b vexpress64: Remove unused macro XR3PCI_ECAM_OFFSET
Macro XR3PCI_ECAM_OFFSET is unused and in case it would be needed in future
it can be replaced by standard PCIE_ECAM_OFFSET macro from pci.h file.

Signed-off-by: Pali Rohár <pali@kernel.org>
2022-01-12 14:21:24 -05:00

197 lines
6 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) ARM Ltd 2015
*
* Author: Liviu Dudau <Liviu.Dudau@arm.com>
*/
#include <common.h>
#include <init.h>
#include <log.h>
#include <asm/io.h>
#include <linux/bitops.h>
#include <pci_ids.h>
#include <linux/delay.h>
#include "pcie.h"
/* XpressRICH3 support */
#define XR3_CONFIG_BASE 0x7ff30000
#define XR3_RESET_BASE 0x7ff20000
#define XR3_PCI_ECAM_START 0x40000000
#define XR3_PCI_ECAM_SIZE 28 /* as power of 2 = 0x10000000 */
#define XR3_PCI_IOSPACE_START 0x5f800000
#define XR3_PCI_IOSPACE_SIZE 23 /* as power of 2 = 0x800000 */
#define XR3_PCI_MEMSPACE_START 0x50000000
#define XR3_PCI_MEMSPACE_SIZE 27 /* as power of 2 = 0x8000000 */
#define XR3_PCI_MEMSPACE64_START 0x4000000000
#define XR3_PCI_MEMSPACE64_SIZE 33 /* as power of 2 = 0x200000000 */
#define JUNO_V2M_MSI_START 0x2c1c0000
#define JUNO_V2M_MSI_SIZE 12 /* as power of 2 = 4096 */
#define XR3PCI_BASIC_STATUS 0x18
#define XR3PCI_BS_GEN_MASK (0xf << 8)
#define XR3PCI_BS_LINK_MASK 0xff
#define XR3PCI_VIRTCHAN_CREDITS 0x90
#define XR3PCI_BRIDGE_PCI_IDS 0x9c
#define XR3PCI_PEX_SPC2 0xd8
#define XR3PCI_ATR_PCIE_WIN0 0x600
#define XR3PCI_ATR_PCIE_WIN1 0x700
#define XR3PCI_ATR_AXI4_SLV0 0x800
#define XR3PCI_ATR_TABLE_SIZE 0x20
#define XR3PCI_ATR_SRC_ADDR_LOW 0x0
#define XR3PCI_ATR_SRC_ADDR_HIGH 0x4
#define XR3PCI_ATR_TRSL_ADDR_LOW 0x8
#define XR3PCI_ATR_TRSL_ADDR_HIGH 0xc
#define XR3PCI_ATR_TRSL_PARAM 0x10
/* IDs used in the XR3PCI_ATR_TRSL_PARAM */
#define XR3PCI_ATR_TRSLID_AXIDEVICE (0x420004)
#define XR3PCI_ATR_TRSLID_AXIMEMORY (0x4e0004) /* Write-through, read/write allocate */
#define XR3PCI_ATR_TRSLID_PCIE_CONF (0x000001)
#define XR3PCI_ATR_TRSLID_PCIE_IO (0x020000)
#define XR3PCI_ATR_TRSLID_PCIE_MEMORY (0x000000)
#define JUNO_RESET_CTRL 0x1004
#define JUNO_RESET_CTRL_PHY BIT(0)
#define JUNO_RESET_CTRL_RC BIT(1)
#define JUNO_RESET_STATUS 0x1008
#define JUNO_RESET_STATUS_PLL BIT(0)
#define JUNO_RESET_STATUS_PHY BIT(1)
#define JUNO_RESET_STATUS_RC BIT(2)
#define JUNO_RESET_STATUS_MASK (JUNO_RESET_STATUS_PLL | \
JUNO_RESET_STATUS_PHY | \
JUNO_RESET_STATUS_RC)
static void xr3pci_set_atr_entry(unsigned long base, unsigned long src_addr,
unsigned long trsl_addr, int window_size,
int trsl_param)
{
/* X3PCI_ATR_SRC_ADDR_LOW:
- bit 0: enable entry,
- bits 1-6: ATR window size: total size in bytes: 2^(ATR_WSIZE + 1)
- bits 7-11: reserved
- bits 12-31: start of source address
*/
writel((u32)(src_addr & 0xfffff000) | (window_size - 1) << 1 | 1,
base + XR3PCI_ATR_SRC_ADDR_LOW);
writel((u32)(src_addr >> 32), base + XR3PCI_ATR_SRC_ADDR_HIGH);
writel((u32)(trsl_addr & 0xfffff000), base + XR3PCI_ATR_TRSL_ADDR_LOW);
writel((u32)(trsl_addr >> 32), base + XR3PCI_ATR_TRSL_ADDR_HIGH);
writel(trsl_param, base + XR3PCI_ATR_TRSL_PARAM);
debug("ATR entry: 0x%010lx %s 0x%010lx [0x%010llx] (param: 0x%06x)\n",
src_addr, (trsl_param & 0x400000) ? "<-" : "->", trsl_addr,
((u64)1) << window_size, trsl_param);
}
static void xr3pci_setup_atr(void)
{
/* setup PCIe to CPU address translation tables */
unsigned long base = XR3_CONFIG_BASE + XR3PCI_ATR_PCIE_WIN0;
/* forward all writes from PCIe to GIC V2M (used for MSI) */
xr3pci_set_atr_entry(base, JUNO_V2M_MSI_START, JUNO_V2M_MSI_START,
JUNO_V2M_MSI_SIZE, XR3PCI_ATR_TRSLID_AXIDEVICE);
base += XR3PCI_ATR_TABLE_SIZE;
/* PCIe devices can write anywhere in memory */
xr3pci_set_atr_entry(base, PHYS_SDRAM_1, PHYS_SDRAM_1,
31 /* grant access to all RAM under 4GB */,
XR3PCI_ATR_TRSLID_AXIMEMORY);
base += XR3PCI_ATR_TABLE_SIZE;
xr3pci_set_atr_entry(base, PHYS_SDRAM_2, PHYS_SDRAM_2,
XR3_PCI_MEMSPACE64_SIZE,
XR3PCI_ATR_TRSLID_AXIMEMORY);
/* setup CPU to PCIe address translation table */
base = XR3_CONFIG_BASE + XR3PCI_ATR_AXI4_SLV0;
/* setup ECAM space to bus configuration interface */
xr3pci_set_atr_entry(base, XR3_PCI_ECAM_START, 0, XR3_PCI_ECAM_SIZE,
XR3PCI_ATR_TRSLID_PCIE_CONF);
base += XR3PCI_ATR_TABLE_SIZE;
/* setup IO space translation */
xr3pci_set_atr_entry(base, XR3_PCI_IOSPACE_START, 0,
XR3_PCI_IOSPACE_SIZE, XR3PCI_ATR_TRSLID_PCIE_IO);
base += XR3PCI_ATR_TABLE_SIZE;
/* setup 32bit MEM space translation */
xr3pci_set_atr_entry(base, XR3_PCI_MEMSPACE_START, XR3_PCI_MEMSPACE_START,
XR3_PCI_MEMSPACE_SIZE, XR3PCI_ATR_TRSLID_PCIE_MEMORY);
base += XR3PCI_ATR_TABLE_SIZE;
/* setup 64bit MEM space translation */
xr3pci_set_atr_entry(base, XR3_PCI_MEMSPACE64_START, XR3_PCI_MEMSPACE64_START,
XR3_PCI_MEMSPACE64_SIZE, XR3PCI_ATR_TRSLID_PCIE_MEMORY);
}
static void xr3pci_init(void)
{
u32 val;
int timeout = 200;
/* Initialise the XpressRICH3 PCIe host bridge */
/* add credits */
writel(0x00f0b818, XR3_CONFIG_BASE + XR3PCI_VIRTCHAN_CREDITS);
writel(0x1, XR3_CONFIG_BASE + XR3PCI_VIRTCHAN_CREDITS + 4);
/* allow ECRC */
writel(0x6006, XR3_CONFIG_BASE + XR3PCI_PEX_SPC2);
/* setup the correct class code for the host bridge */
writel(PCI_CLASS_BRIDGE_PCI << 16, XR3_CONFIG_BASE + XR3PCI_BRIDGE_PCI_IDS);
/* reset phy and root complex */
writel(JUNO_RESET_CTRL_PHY | JUNO_RESET_CTRL_RC,
XR3_RESET_BASE + JUNO_RESET_CTRL);
do {
mdelay(1);
val = readl(XR3_RESET_BASE + JUNO_RESET_STATUS);
} while (--timeout &&
(val & JUNO_RESET_STATUS_MASK) != JUNO_RESET_STATUS_MASK);
if (!timeout) {
printf("PCI XR3 Root complex reset timed out\n");
return;
}
/* Wait for the link to train */
mdelay(20);
timeout = 20;
do {
mdelay(1);
val = readl(XR3_CONFIG_BASE + XR3PCI_BASIC_STATUS);
} while (--timeout && !(val & XR3PCI_BS_LINK_MASK));
if (!(val & XR3PCI_BS_LINK_MASK)) {
printf("Failed to negotiate a link!\n");
return;
}
printf("PCIe XR3 Host Bridge enabled: x%d link (Gen %d)\n",
val & XR3PCI_BS_LINK_MASK, (val & XR3PCI_BS_GEN_MASK) >> 8);
xr3pci_setup_atr();
}
void vexpress64_pcie_init(void)
{
/* Initialise and configure the PCIe host bridge. */
xr3pci_init();
/* Register the now ECAM complaint PCIe host controller with U-Boot. */
pci_init();
}