u-boot/drivers/video/bridge/Kconfig
Vasily Khoruzhick 491041c749 video: add anx6345 DM driver
This is a eDP bridge similar to ANX9804, it allows to connect eDP panels
to the chips that can output only parallel signal

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
[agust: fixed most checkpatch errors/warnings]
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2017-10-26 15:43:11 +02:00

35 lines
1.4 KiB
Text

config VIDEO_BRIDGE
bool "Support video bridges"
depends on DM
help
Some platforms use video bridges to convert from one output to
another. For example, where the SoC only supports eDP and the LCD
requires LVDS, an eDP->LVDS bridge chip can be used to provide the
necessary conversion. This option enables support for these devices.
config VIDEO_BRIDGE_PARADE_PS862X
bool "Support Parade PS862X DP->LVDS bridge"
depends on VIDEO_BRIDGE
help
The Parade PS8622 and PS8625 are DisplayPort-to-LVDS (Low voltage
differential signalling) converters. They enable an LVDS LCD panel
to be connected to an eDP output device such as an SoC that lacks
LVDS capability, or where LVDS requires too many signals to route
on the PCB. Setup parameters are provided in the device tree.
config VIDEO_BRIDGE_NXP_PTN3460
bool "Support NXP PTN3460 DP->LVDS bridge"
depends on VIDEO_BRIDGE
help
The NXP PTN3460 is a DisplayPort-to-LVDS (Low voltage differential
signalling) converter. It enables an LVDS LCD panel to be connected
to an eDP output device such as an SoC that lacks LVDS capability,
or where LVDS requires too many signals to route on the PCB.
config VIDEO_BRIDGE_ANALOGIX_ANX6345
bool "Support Analogix ANX6345 RGB->DP bridge"
depends on VIDEO_BRIDGE
select DM_I2C
help
The Analogix ANX6345 is RGB-to-DP converter. It enables an eDP LCD
panel to be connected to an parallel LCD interface.