mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-29 08:01:08 +00:00
623aca8830
As the mux/pull/drive feature implement at own file, the type and label are not necessary. Signed-off-by: David Wu <david.wu@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
109 lines
2.6 KiB
C
109 lines
2.6 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2019 Rockchip Electronics Co., Ltd
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <dm/pinctrl.h>
|
|
#include <regmap.h>
|
|
#include <syscon.h>
|
|
|
|
#include "pinctrl-rockchip.h"
|
|
|
|
static int rk3036_set_mux(struct rockchip_pin_bank *bank, int pin, int mux)
|
|
{
|
|
struct rockchip_pinctrl_priv *priv = bank->priv;
|
|
int iomux_num = (pin / 8);
|
|
struct regmap *regmap;
|
|
int reg, ret, mask, mux_type;
|
|
u8 bit;
|
|
u32 data;
|
|
|
|
regmap = (bank->iomux[iomux_num].type & IOMUX_SOURCE_PMU)
|
|
? priv->regmap_pmu : priv->regmap_base;
|
|
|
|
/* get basic quadrupel of mux registers and the correct reg inside */
|
|
mux_type = bank->iomux[iomux_num].type;
|
|
reg = bank->iomux[iomux_num].offset;
|
|
reg += rockchip_get_mux_data(mux_type, pin, &bit, &mask);
|
|
|
|
data = (mask << (bit + 16));
|
|
data |= (mux & mask) << bit;
|
|
ret = regmap_write(regmap, reg, data);
|
|
|
|
return ret;
|
|
}
|
|
|
|
#define RK3036_PULL_OFFSET 0x118
|
|
#define RK3036_PULL_PINS_PER_REG 16
|
|
#define RK3036_PULL_BANK_STRIDE 8
|
|
|
|
static void rk3036_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
|
|
int pin_num, struct regmap **regmap,
|
|
int *reg, u8 *bit)
|
|
{
|
|
struct rockchip_pinctrl_priv *priv = bank->priv;
|
|
|
|
*regmap = priv->regmap_base;
|
|
*reg = RK3036_PULL_OFFSET;
|
|
*reg += bank->bank_num * RK3036_PULL_BANK_STRIDE;
|
|
*reg += (pin_num / RK3036_PULL_PINS_PER_REG) * 4;
|
|
|
|
*bit = pin_num % RK3036_PULL_PINS_PER_REG;
|
|
};
|
|
|
|
static int rk3036_set_pull(struct rockchip_pin_bank *bank,
|
|
int pin_num, int pull)
|
|
{
|
|
struct regmap *regmap;
|
|
int reg, ret;
|
|
u8 bit;
|
|
u32 data;
|
|
|
|
if (pull != PIN_CONFIG_BIAS_PULL_PIN_DEFAULT &&
|
|
pull != PIN_CONFIG_BIAS_DISABLE)
|
|
return -ENOTSUPP;
|
|
|
|
rk3036_calc_pull_reg_and_bit(bank, pin_num, ®map, ®, &bit);
|
|
data = BIT(bit + 16);
|
|
if (pull == PIN_CONFIG_BIAS_DISABLE)
|
|
data |= BIT(bit);
|
|
ret = regmap_write(regmap, reg, data);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct rockchip_pin_bank rk3036_pin_banks[] = {
|
|
PIN_BANK(0, 32, "gpio0"),
|
|
PIN_BANK(1, 32, "gpio1"),
|
|
PIN_BANK(2, 32, "gpio2"),
|
|
};
|
|
|
|
static struct rockchip_pin_ctrl rk3036_pin_ctrl = {
|
|
.pin_banks = rk3036_pin_banks,
|
|
.nr_banks = ARRAY_SIZE(rk3036_pin_banks),
|
|
.grf_mux_offset = 0xa8,
|
|
.set_mux = rk3036_set_mux,
|
|
.set_pull = rk3036_set_pull,
|
|
};
|
|
|
|
static const struct udevice_id rk3036_pinctrl_ids[] = {
|
|
{
|
|
.compatible = "rockchip,rk3036-pinctrl",
|
|
.data = (ulong)&rk3036_pin_ctrl
|
|
},
|
|
{}
|
|
};
|
|
|
|
U_BOOT_DRIVER(pinctrl_rockchip) = {
|
|
.name = "rk3036-pinctrl",
|
|
.id = UCLASS_PINCTRL,
|
|
.of_match = rk3036_pinctrl_ids,
|
|
.priv_auto_alloc_size = sizeof(struct rockchip_pinctrl_priv),
|
|
.ops = &rockchip_pinctrl_ops,
|
|
#if !CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
.bind = dm_scan_fdt_dev,
|
|
#endif
|
|
.probe = rockchip_pinctrl_probe,
|
|
};
|