u-boot/arch/arm/cpu/armv7m/mpu.c
Vikas Manocha 96b61ab15c armv7m: add MPU configuration support
Cortex-M archs support option memory protection unit (MPU). MPU is used
to set the memory types, attributes, access permissions for different regions,
cache policies of the device.

e.g. using MPU it is possible to configure memory region as device memory
or strongly ordered, memory attributes like execute never, cache policies
like write-back or write-through.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2017-05-12 08:37:06 -04:00

82 lines
1.8 KiB
C

/*
* (C) Copyright 2017
* Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <linux/bitops.h>
#include <asm/armv7m.h>
#include <asm/armv7m_mpu.h>
#include <asm/io.h>
#define V7M_MPU_CTRL_ENABLE (1 << 0)
#define V7M_MPU_CTRL_DISABLE (0 << 0)
#define V7M_MPU_CTRL_HFNMIENA (1 << 1)
#define VALID_REGION (1 << 4)
#define ENABLE_REGION (1 << 0)
#define AP_SHIFT 24
#define XN_SHIFT 28
#define TEX_SHIFT 19
#define S_SHIFT 18
#define C_SHIFT 17
#define B_SHIFT 16
#define REGION_SIZE_SHIFT 1
#define CACHEABLE (1 << C_SHIFT)
#define BUFFERABLE (1 << B_SHIFT)
#define SHAREABLE (1 << S_SHIFT)
void disable_mpu(void)
{
writel(0, &V7M_MPU->ctrl);
}
void enable_mpu(void)
{
writel(V7M_MPU_CTRL_ENABLE | V7M_MPU_CTRL_HFNMIENA, &V7M_MPU->ctrl);
/* Make sure new mpu config is effective for next memory access */
dsb();
isb(); /* Make sure instruction stream sees it */
}
void mpu_config(struct mpu_region_config *reg_config)
{
uint32_t attr;
switch (reg_config->mr_attr) {
case STRONG_ORDER:
attr = SHAREABLE;
break;
case SHARED_WRITE_BUFFERED:
attr = BUFFERABLE;
break;
case O_I_WT_NO_WR_ALLOC:
attr = CACHEABLE;
break;
case O_I_WB_NO_WR_ALLOC:
attr = CACHEABLE | BUFFERABLE;
break;
case O_I_NON_CACHEABLE:
attr = 1 << TEX_SHIFT;
break;
case O_I_WB_RD_WR_ALLOC:
attr = (1 << TEX_SHIFT) | CACHEABLE | BUFFERABLE;
break;
case DEVICE_NON_SHARED:
attr = (2 << TEX_SHIFT) | BUFFERABLE;
default:
attr = 0; /* strongly ordered */
break;
};
writel(reg_config->start_addr | VALID_REGION | reg_config->region_no,
&V7M_MPU->rbar);
writel(reg_config->xn << XN_SHIFT | reg_config->ap << AP_SHIFT | attr
| reg_config->reg_size << REGION_SIZE_SHIFT | ENABLE_REGION
, &V7M_MPU->rasr);
}