mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-25 04:23:46 +00:00
6c4a1eba3f
This is a workaround for hardware erratum. Write the value of 63b2_0042h to EDDRTQCFG will optimal the memory controller performance. The value: 63b2_0042h comes from the hardware team. Signed-off-by: Yuan Yao <yao.yuan@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
90 lines
2.6 KiB
C
90 lines
2.6 KiB
C
/*
|
|
* Copyright 2015 Freescale Semiconductor, Inc.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/immap_ls102xa.h>
|
|
#include <asm/arch/ls102xa_soc.h>
|
|
|
|
unsigned int get_soc_major_rev(void)
|
|
{
|
|
struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
|
|
unsigned int svr, major;
|
|
|
|
svr = in_be32(&gur->svr);
|
|
major = SVR_MAJ(svr);
|
|
|
|
return major;
|
|
}
|
|
|
|
int arch_soc_init(void)
|
|
{
|
|
struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
|
|
struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
|
|
unsigned int major;
|
|
|
|
#ifdef CONFIG_FSL_QSPI
|
|
out_be32(&scfg->qspi_cfg, SCFG_QSPI_CLKSEL);
|
|
#endif
|
|
|
|
#ifdef CONFIG_FSL_DCU_FB
|
|
out_be32(&scfg->pixclkcr, SCFG_PIXCLKCR_PXCKEN);
|
|
#endif
|
|
|
|
/* Configure Little endian for SAI, ASRC and SPDIF */
|
|
out_be32(&scfg->endiancr, SCFG_ENDIANCR_LE);
|
|
|
|
/*
|
|
* Enable snoop requests and DVM message requests for
|
|
* All the slave insterfaces.
|
|
*/
|
|
out_le32(&cci->slave[0].snoop_ctrl,
|
|
CCI400_DVM_MESSAGE_REQ_EN | CCI400_SNOOP_REQ_EN);
|
|
out_le32(&cci->slave[1].snoop_ctrl,
|
|
CCI400_DVM_MESSAGE_REQ_EN | CCI400_SNOOP_REQ_EN);
|
|
out_le32(&cci->slave[2].snoop_ctrl,
|
|
CCI400_DVM_MESSAGE_REQ_EN | CCI400_SNOOP_REQ_EN);
|
|
out_le32(&cci->slave[4].snoop_ctrl,
|
|
CCI400_DVM_MESSAGE_REQ_EN | CCI400_SNOOP_REQ_EN);
|
|
|
|
major = get_soc_major_rev();
|
|
if (major == SOC_MAJOR_VER_1_0) {
|
|
/*
|
|
* Set CCI-400 Slave interface S1, S2 Shareable Override
|
|
* Register All transactions are treated as non-shareable
|
|
*/
|
|
out_le32(&cci->slave[1].sha_ord, CCI400_SHAORD_NON_SHAREABLE);
|
|
out_le32(&cci->slave[2].sha_ord, CCI400_SHAORD_NON_SHAREABLE);
|
|
|
|
/* Workaround for the issue that DDR could not respond to
|
|
* barrier transaction which is generated by executing DSB/ISB
|
|
* instruction. Set CCI-400 control override register to
|
|
* terminate the barrier transaction. After DDR is initialized,
|
|
* allow barrier transaction to DDR again */
|
|
out_le32(&cci->ctrl_ord, CCI400_CTRLORD_TERM_BARRIER);
|
|
}
|
|
|
|
/* Enable all the snoop signal for various masters */
|
|
out_be32(&scfg->snpcnfgcr, SCFG_SNPCNFGCR_SEC_RD_WR |
|
|
SCFG_SNPCNFGCR_DCU_RD_WR |
|
|
SCFG_SNPCNFGCR_SATA_RD_WR |
|
|
SCFG_SNPCNFGCR_USB3_RD_WR |
|
|
SCFG_SNPCNFGCR_DBG_RD_WR |
|
|
SCFG_SNPCNFGCR_EDMA_SNP);
|
|
|
|
/*
|
|
* Memory controller require a register write before being enabled.
|
|
* Affects: DDR
|
|
* Register: EDDRTQCFG
|
|
* Description: Memory controller performance is not optimal with
|
|
* default internal target queue register values.
|
|
* Workaround: Write a value of 63b2_0042h to address: 157_020Ch.
|
|
*/
|
|
out_be32(&scfg->eddrtqcfg, 0x63b20042);
|
|
|
|
return 0;
|
|
}
|