mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-30 08:31:03 +00:00
18c9b10ce7
Update amcore board to use dm serial driver. Signed-off-by: Angelo Dureghello <angelo@sysam.it> --- Changes for v2: - None
114 lines
2.4 KiB
C
114 lines
2.4 KiB
C
/*
|
|
* Board functions for Sysam AMCORE (MCF5307 based) board
|
|
*
|
|
* (C) Copyright 2016 Angelo Dureghello <angelo@sysam.it>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*
|
|
* This file copies memory testdram() from sandburst/common/sb_common.c
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/immap.h>
|
|
#include <asm/io.h>
|
|
#include <dm.h>
|
|
#include <dm/platform_data/serial_coldfire.h>
|
|
|
|
void init_lcd(void)
|
|
{
|
|
/* setup for possible K0108 lcd connected on the parallel port */
|
|
sim_t *sim = (sim_t *)(MMAP_SIM);
|
|
|
|
out_be16(&sim->par, 0x300);
|
|
|
|
gpio_t *gpio = (gpio_t *)(MMAP_GPIO);
|
|
|
|
out_be16(&gpio->paddr, 0xfcff);
|
|
out_be16(&gpio->padat, 0x0c00);
|
|
}
|
|
|
|
int checkboard(void)
|
|
{
|
|
puts("Board: ");
|
|
puts("AMCORE v.001(alpha)\n");
|
|
|
|
init_lcd();
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* in initdram we are here executing from flash
|
|
* case 1:
|
|
* is with no ACR/flash cache enabled
|
|
* nop = 40ns (scope measured)
|
|
*/
|
|
void fudelay(int usec)
|
|
{
|
|
while (usec--)
|
|
asm volatile ("nop");
|
|
}
|
|
|
|
phys_size_t initdram(int board_type)
|
|
{
|
|
u32 dramsize, RC;
|
|
|
|
sdramctrl_t *dc = (sdramctrl_t *)(MMAP_DRAMC);
|
|
|
|
/*
|
|
* SDRAM MT48LC4M32B2 details
|
|
* Memory block 0: 16 MB of SDRAM at address $00000000
|
|
* Port size: 32-bit port
|
|
*
|
|
* Memory block 0 wired as follows:
|
|
* CPU : A15 A14 A13 A12 A11 A10 A9 A17 A18 A19 A20 A21 A22 A23
|
|
* SDRAM : A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 BA0 BA1
|
|
*
|
|
* Ensure that there is a delay of at least 100 microseconds from
|
|
* processor reset to the following code so that the SDRAM is ready
|
|
* for commands.
|
|
*/
|
|
fudelay(100);
|
|
|
|
/*
|
|
* DCR
|
|
* set proper RC as per specification
|
|
*/
|
|
RC = (CONFIG_SYS_CPU_CLK / 1000000) >> 1;
|
|
RC = (RC * 15) >> 4;
|
|
|
|
/* 0x8000 is the faster option */
|
|
out_be16(&dc->dcr, 0x8200 | RC);
|
|
|
|
/*
|
|
* DACR0, page mode continuous, CMD on A20 0x0300
|
|
*/
|
|
out_be32(&dc->dacr0, 0x00003304);
|
|
|
|
dramsize = ((CONFIG_SYS_SDRAM_SIZE)-1) & 0xfffc0000;
|
|
out_be32(&dc->dmr0, dramsize|1);
|
|
|
|
/* issue a PRECHARGE ALL */
|
|
out_be32(&dc->dacr0, 0x0000330c);
|
|
out_be32((u32 *)0x00000004, 0xbeaddeed);
|
|
/* issue AUTOREFRESH */
|
|
out_be32(&dc->dacr0, 0x0000b304);
|
|
/* let refresh occour */
|
|
fudelay(1);
|
|
|
|
out_be32(&dc->dacr0, 0x0000b344);
|
|
out_be32((u32 *)0x00000c00, 0xbeaddeed);
|
|
|
|
return get_ram_size(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_SDRAM_SIZE);
|
|
}
|
|
|
|
static struct coldfire_serial_platdata mcf5307_serial_plat = {
|
|
.base = CONFIG_SYS_UART_BASE,
|
|
.port = 0,
|
|
.baudrate = CONFIG_BAUDRATE,
|
|
};
|
|
|
|
U_BOOT_DEVICE(coldfire_serial) = {
|
|
.name = "serial_coldfire",
|
|
.platdata = &mcf5307_serial_plat,
|
|
};
|